PARTITION FOR EMPLOYEE CHANGE ROOM AND RESIN KITCHEN IN NEW LCA HANGAR DODDANAKKUNDI ACD HAL HC BANGALORE

HINDUSTAN AERONAUTICS LIMITED BANGALORE AEROSPACE COMPOSITES DIVISION

NAME OF THE WORK: “PARTITION FOR EMPLOYEE CHANGE ROOM AND RESIN KITCHEN IN NEW LCA HANGAR DODDANAKKUNDI , ACD,HAL (HC), BANGALORE." CONTRACT NO. HAL/ACD/R-157/2024

Name of the Tenderer:

Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

1 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with lSi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm),with double speed adjustment with necessary accessories and screws etc. complete. 4 Each 903.25 3612.99

2 Structural steelwork riveted, bolted or welded in built up sections, trusses and framed work at any height , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 1400 Kgs 122.83 171967.66

3 Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames,windows, ventilators (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections. Ventilators: Approx.63.5 X 38.1 X 1.7 mm and weight n.less than 0.9Kg/m conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frame shall be approx. (91.8 x 31.75 x 1.5) mm and weighing not less than 0.98 kg/m to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and not less than (91.8 x 45.5 to 37.5 x 1.5) mm and weighing not less than 1.57 kg/m. and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, Partitions with Approx. 101X44X2mm weighing not less than 1.57 kg/m fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling will be paid seperately) 1010 kg 487.75 492630.66

For fixed portion outer framePowder coated aluminium (minimum thickness of powder coating 50 micron)

4 For shutters of doors, three track sliding windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required also includes handles,tower bolts,stoper. 77 kg 582.89 44882.34

Powder coated aluminium (minimum thickness of powder coating 50 micron)

5 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 31.00 Sqm 1046.71 32447.94

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

6 Providing and fixing glazing in aluminium door, three track sliding window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 4.50 Sqm 1382.92 6223.12

b) With float glass panes of 4 mm thickness (weight not less than 10 kg/sqm) 86.00 Sqm 1081.16 92979.77

7 Providing and fixing brass 100 mm mortice latch and lock with 6 levers without pair handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc coplete. 5.00 each 485.87 2429.35

8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets embedded in cement mortar (1:3), connecting the waste pipe to floor trap with all necessary fittings and accessories like 32 mm dia semi-rigid PVC waste pipe(concealed in the wall) including PVC waste fittings, clamps etc all as per manufacturers specification and direction of Engineer-in-charge. 4.00 Each 7426.18 29704.71

9 Providing and fixing White Vitreous China Wash basin of size 630x450 mm or nearest available size of approved make with a pair of 15 mm C.P. brass pillar tap of approved model & make, C.I. brackets, 32 mm C.P. brass waste fitting, 32 mm dia semi-rigid PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls, connecting to floor trap and with all necessary fittings and accessories etc. wherever require all complete as directed by the Engineer-in-Charge. 1.00 Each 2140.87 2140.87

10 Providing, fixing, testing and commissioning Cast iron/ S.S type trap ( floor trap ) of available size and approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc.,all complete as directed by the Engineer-in-Charge. 6.00 Each 543.34 3260.02

11 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc. complete as per direction of Engineer in Charge.

12 Supplying, laying, testing and commissioning the 75 mm dia PVC pipes of 6 kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors etc., all complete as directed by the Engineer-in-Charge 6.00 Rm 338.98 2033.90

13 Dismantling/removing tile work (for thickness of tiles 10mm to 25mm.) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any,including stacking material and disposal of dismantled materials up to a lead of 50 mtr as per direction of Engineer-in-charge. 7.50 Sqm 67.43 505.76

14 Demolishing cement concrete manually/ by mechanical means/ machine cut including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)and including stacking material ,after making temporary proetction for existing service linescomplete as per direction of Engineer-in-charge. 2.00 Cum 1381.40 2762.80

15 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. 5.00 Sqm 1322.42 6612.09

16 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2.50 sqm 1164.90 2912.26

17 Disposal of moorum/earth/building rubbish/ malba/ similar unserviceable,GI sheets,Aluminium windows, wooden doors, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, all complete as per directions of Engineer-in-charge. 3.00 Cu m 453.94 1361.83

18 Supply and fixing of WPC partitions and fixtures for urinals partition and partition wall etc comlete as directed by EIC. 4.50 sqm 5932.20 26694.92

Sub-Total (Excluding GST) 947993.02

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 947993.02 ABOVE % 947993.02

Grand Total (Including GST) 1118631.76

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

AEROSPACE COMPOSITES DIVISION

Pre-Qulification Profile (To Be uploaded along with Technical Bid PART A)

Tender Ref No. or Contract No.: HC/DGM(Maint.)-ACD/TN-105/2024

Name of Work: PARTITION FOR EMPLOYEE CHANGE ROOM AND RESIN KITCHEN IN NEW LCA HANGAR DODDANAKKUNDI , ACD,HAL (HC), BANGALORE. Cont. No: HAL/ACD/R-157/2024

Estimated Amount in Rs: 11,18,632/-

Tender Notice Date: 06.12.2024

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory

2 Type of ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Related Document to be Uploaded to eProcurement Portal

4 Address for correspondence:

5 PAN No.: Related Document to be Uploaded to eProcurement Portal

6 Contact details

Contact person name

Ph. No. with STD code

FAX No. with STD code

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs

Registration No.

PEMD Amount ( If paid )

8 I.T Returns for past 03 years

2023-24 Related Document to be Uploaded to eProcurement Portal

9 Average annual financial turn over during the last 3 years, ending financial year 31st March 2024 [ should not be less than 30% of Amount put to tender]

YEAR TURN OVER IN Rupees Enclosed / Not Enclosed REMARKS

2023-24 Audited Report duly certified by the Auditor to be enclosed to support the turn over

Average annual Financial turn over 0.00

10 ESI & PF Nos and GST Nos. with proof Nos Enclosed / Not Enclosed

ESI Registration No. with proof Related Document to be Uploaded to eProcurement Portal

PF Registration No. with proof if any

GST Registration No. with proof

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of tender.

Name of Bank & Branch Related Document to be Uploaded to eProcurement Portal

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Completed similar works during last 7 years

Work No I Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.

Brief Description of Work: Please Enter details for Work No 1

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Please Enter details for Work No 2

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Please Enter details for Work No 3

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Ph. No. with STD code

FAX No. with STD code

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 156) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work.

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Related Document to be Uploaded to eProcurement Portal