Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹33.4 L+₹97,279 (3.00%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹33.6 L+₹1.2 L (3.80%)Rejected-Finance S NO 7 3 FLAT NO 4 HILL VIEW RESIDENCY LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance High Rate | |
| 4 | L4₹34.5 L+₹2.1 L (6.52%)Rejected-Finance | L4 | Rejected-Finance High Rate | |
| 5 | L5₹38.5 L+₹6.1 L (18.9%)Rejected-Finance | L5 | Rejected-Finance High Rate |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8367 REPAIR / REPLACEMENT OF CERTAIN BR ITEMS IN CERTAIN MD / OTM ACCN AT OLD NDA COMPLEX UNDER GE (CENTRAL) PUNE
2022_MES_568751_1
8367 REPAIR/ REPLACEMENT OF CERTAIN BR ITEMS IN CE
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹90,000
Yes
27 Feb 2023
12 Dec 2022
5 Jan 2023
12 Dec 2022
3 Jan 2023
22 Dec 2022
Amount
S & F in repair aluminium powder coated curtain rails 25mm dia with rings @ 10cm c/c etc complete all as specified.
S & F in repair aluminium powder coated brakcet, knobs,complete all as specified.
Supply and fix in repair 18/19 mm thick block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face and white balancing lamination on other side and inclusive of teak wood lipping 6mm thick in shelves / partition / shutters fixed with nails all as specified.
Supply and fix in repair 30mm width flap continuous (piano) hinges, stainless steel, bright finish or electrogalvanised complete all as specified.
Dismantling of stone slabs and tiles of any description laid in CM in floors, approns etc complete all as specified andand removal of debris out side defence land complete all as directed
M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.
S & F in repair 150mm stainles steel fancy type handle for cabinet shutters including fixing with stainless steel screws etc complete all as specified and as directed.
S & F in repair magnetic catcher for cabinet shutters with fixing arrangement complete all as specified and as directed.
S & F in repair Stainless steel plate rack of size not less than 900 x 900 mm made out of sheet grade SS-304 thickness not less than 0.63mm approved quality finish complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete and removal of debris out side defence land complete all as directed.
M & L for 25mm thick PCC type B0 1:2:4 (using 12.5mm graded stone aggregates) finished even and smooth without using extra cement as in roof padding and similar items mixed with liquid water proofing compound as per manufacturer's instruction complete all as specified and as directed. Note : Liquid water proofing compound shall be measured and paid for saparately.
M & L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in PCC padding in coping, benching, roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface finished even and smooth without using extra cement includng necessary water proofing chemicals all as specified and directed by the Engr-in-charge. (Note : WPC shall be measured and paid separately)
M & L water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below : - (a) M & L for 10 mm thick plaster screed bed layer in CM 1:3 on concrete surfaces by using liquid Water proofing chemicals @ 200 ml per bag of cement. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dirt dust etc and evenly applying one coat of oil based cold bituminous primer @ 0.70 Kg per Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.60 Kg/Sqm and 3 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 Ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engr-in-charge.
Dismantling of AC / CGI sheet corrugated, or semi corrugated in roof covering complete all as directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed
Dismantling of structural steel work including doors, gates but excluding framed Truss etc complete all as specified
M & L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position conforming to Fe-410W (Grade E-250, quality A) complete all as specified and as directed.
Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .
Dismantling of single layer mangalore pattern or similar tiles in roofing including ridge pieces etc complete all as specified and directed .
Dismantling of battens for tiles of any size including tilting fillets spacing exc. 15 cm complete all as specified and directed .
S & F Battens for tiles, shingles etc sectional area exc 5 but not not exc 15sqcm of size including tilting fillets all as specified and directed .
Fixing only battern of any sectional area all as directed. Note :- Old battern obtained from dismantling shall be reused..
S & F Roof tiles, mangalore Pattern, interlocking at side joints, laid dry complete all as specified and directed .
All as per item No 25 above but except tile etc complete all as specified and directed. Note :- Old tiles, obtained from dismantling shall be reused.
M & L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.
M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed..
M & L for preparation of new / previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed..
M & L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..
M & L for precast concrete solid block masonry exc 10 cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 including dismantling of old brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc, (but excluding ashlar facings, dressed stonework and precast concrete articles) complete all as directed.
M & L for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth with a thin layer of sagol finish in patches work including taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:4 in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) on brick / concrete surfaces with sponge finish in patches work complete all as specified and directed
M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer by mechanical means over and including 2mm thick wall care putty complete all specified and directed.
M & L Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.
M & L Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint on wall all as directed and specified.
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) and removal of debris out side defence land complete all as directed .
M & L for 75mm thick levelling course / sub base in cement concrete type C-2 1:3:6 using 40mm graded stone aggregate complete all as specified and as directed.
M & L for 50mm thick levelling course in cement concrete type B-1 1:3:6 using 20mm graded stone aggregate complete aall as specified and as directed.
M & L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed.
Material and labour for Non skid coloured ceramic tiles of size 600mm x 600mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.
Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete all as directed. .
S & F Powder aluminium snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs / purlin /rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick one side prelaminated Gypsum ceiling board of as approved complete with following aluminium powder coated sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction / crossing with aluminium powder coated angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg / RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium powder coated angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.
Supply only liquid water proofing compound
REKHA ELECTRICALS
R K CONSTRUCTION AND ENGINEERING
BAGESHWARY CONSTRUCTION
L.T Associate
M/s Asrani and sons
Suma Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .