REPAIRS TO AC SHEETS, ROOF TREATMENT, FALSE CEILING, JOINERY, PLUMBING, FLOORING AND CERTAIN BR WORKS AT VARIOUS BUILDINGS OF RANGIA MILITARY STATION UNDER GE RANGIA

Amount

Taking down chowkhats including shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each complete all as per specified and as directed by Engineer-in-charge.

Taking down chowkhats including shutterrs (without taking off shutters from the frame) not exc. 1.5 sqm each complete all as per specified and as directed by Engineer-in-charge.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as per specified and as directed by Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube complete all as per specified and as directed by Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube complete all as per specified and as directed by Engineer-in-charge.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebaled on the solid, rounded or chamfered, put together with glue pinned at joints complete all as per specified and as directed by Engineer-in-charge.

Taking down shutter of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as per specified and as directed by Engineer-in-charge.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel ,commercial type on both side complete all as per specified and as directed by Engineer-in-charge.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters complete all as per specified and as directed by Engineer-in-charge.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site complete all as per specified and as directed by Engineer-in-charge.

S&F Factory Made Solid PVC moulded Door Shutter (with wood free EPS) 28 to 30mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam sheet on the front face and 2mm prelam PVC sheet on back face Complete as per direction of Engineer-in-charge, manufacturer's instruction complete all as per specified and as directed by Engineer-in-charge.

S & F Factory made solid wire gauzed pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded prelam PVC "C" channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panells will be wire gaused in lieu of single side prelam PVC sheet panel. The wire gause shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire gause shall be stretched to tighten firmly. And jointed to gether with solvent cement, suppling & fixing in the frame at site complete all as per specified and as directed by Engineer-in-charge.

S&F anodised aluminium door using 96.6mm X 44.8 mm X 1.5 mm aluminium chowkhats, 84.0 x44.7mmX1.5mm section vertical styles and 101. 60X44.88X1.5mm rails mounted 04 Nos SS butt hinges 100 mm for each shutter with hydraulic door closer, mortice lock six lever vertical type mild steel 100 mm size (Make Godrej/Harrison) 02 Nos tower bolt 150 mm , sliding bolt 300 mm long 01 No, 200 mm 2 Nos door handles and fittings complete all as specified and directed by Engr-in-Charge bottom panel and top panel fixed with snap beading rubber of suitable size including taking down old unserviceable one complete all as per specified and as directed by Engineer-in-charge.

S&F for anodised Aluminium sliding window and ventiletor frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section & shutter made up of 38 mm / 20 mm/1.5 mm thick without sash bar alum section including all necessary joining cleats,hold fast, rubber gasket anodised snap beading, anodised alumn fittings, suitable aluminium handle and locking arrangment etc. including taking down old unserviceable one complete all as per specified and as directed by Engineer-in-charge.

S&F mild steel medium weight cold rolled butt hinges 100 mm long complete all as per specified and as directed by Engineer-in-charge.

S&F aluminium anodised, barrel tower bolt of extruded section 100 mm long complete all as per specified and as directed by Engineer-in-charge.

S&F 150mm long aluminium handle, cast type, anodised complete all as per specified and as directed by Engineer-in-charge.

S&F 125mm long aluminium handle, cast type, anodised complete all as per specified and as directed by Engineer-in-charge.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as per specified and as directed by Engineer-in-charge.

S&F Stainless steel wire cloth 0.36 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples complete all as per specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick walls including racking out joints, hacking key & scrubbing down with water complete all as per specified and as directed by Engineer-in-charge.

Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as per specified and as directed by Engineer-in-charge.

M&L for G.I. Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as per specified and as directed by Engineer-in-charge.

M&L rendering 10mm thick on other of lathing in cement mortar 1:6 be finished fair & even without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4 , surface finished even and smooth without using extra cement using water proofing compound in top layers as per manufacturer's direction complete all as per specified and as directed by Engineer-in-charge. Note - WPC shall be measured and paid saparately.

Demolition cement concrete not exc. 15 cm thick (below or above ground level) complete all as per specified and as directed by Engineer-in-charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection/sub base of footpath/floor and making the surface even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for average 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded aggregate with integral wpc complies with in sunken floor and bathroom area complete all as per specified and as directed by Engineer-in-charge. Note - WPC shall be measured and paid saparately.

M&L for mass concrete filling using PCC ( 1:5:10) type E2 in sunken floor using WPC @ 3% of cement used complete all as per specified and as directed by Engineer-in-charge. Note - WPC shall be measured and paid saparately.

Dismantling floor, hearth or all tiling including cement mortar bedding (but not backing coat ), removing serviceable tiles to store and rubbish off the premesies complete all as per specified and as directed by Engineer-in-charge.

M&L 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as per specified and as directed by Engineer-in-charge.

M&L 10mm thick backing coat in CM 1:4 on brick or concrete surfaces for fixing of wall tiles as in dado/skirting complete all as per specified and as directed by Engineer-in-charge.

S&F machine pressed precast concrete interlocking paver block gloosy fineshed laid over sand cushioning layer of 40mm thick of any shape and design including taking down size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as per specified and as directed by Engineer-in-charge. NOTE - ( Sand cushioning layer will be measured and paid seperately).

M&L for sand filling under floors or in foundations including watering and consolidation complete all as per specified and as directed by Engineer-in-charge.

M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as per specified and as directed by Engineer-in-charge.

S&F non-skid ceramic colour tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles complete all as per specified and as directed by Engineer-in-charge.

S&F glossy finish chequered cement concrete coloured tiles 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as per specified and as directed by Engineer-in-charge.

S&F non-skid ceramic colour tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles complete all as per specified and as directed by Engineer-in-charge.

S&F for colour glazed ceramic tiles (300x200)x 6x7mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles complete all as per specified and as directed by Engineer-in-charge.

S&F for colour glazed ceramic tiles (275x450) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles complete all as per specified and as directed by Engineer-in-charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded & pointed in any morter complete all as per specified and as directed by Engineer-in-charge.

M&L for machine cut kota stone on flooring/staircase 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as per specified and as directed by Engineer-in-charge.

All as per serial item no. 60 above but on skirting.

S&F non-skid ceramic colour tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mmx300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match with the shades of tiles complete all as per specified and as directed by Engineer-in-charge.

Dismantling of AC sheet corrugated/Semi corrugated sheets in wall cladding or in roof covering complete all as per specified and as directed by Engineer-in-charge.

M&L for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts complete all as per specified and as directed by Engineer-in-charge.

Fixing only Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts (except sheets) complete all as per specified and as directed by Engineer-in-charge.

M&L Asbestos cement serrated ridge for corrugated and semi corrugated sheet 6 mm thick and fixed with L hook and cranked bolt complete all as per specified and as directed by Engineer-in-charge.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed with selftapping screws complete all as per specified and as directed by Engineer-in-charge.

Dismantling of wall & ceiling boards (fibre,pulp,insulation etc.) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as per specified and as directed by Engineer-in-charge.

S&F exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.35mm size cross Tee 24 X 38 X 0.70mm with 4mm dia G.I. suspender fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 6 mm thick E- board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces complete all as per specified and as directed by Engineer-in-charge. (Note- Rate included for lowering / shortening of electric fittings such as fan, light fittings etc.)

M&L for G.l. frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as per specified and as directed by Engineer-in-charge.

Dismantling water tanks and removing exc 250 but n exc 500 ltrs capecity complete all as per specified and as directed by Engineer-in-charge.

S&F 500 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PTMT float valve complete all as per specified and as directed by Engineer-in-charge.

Dismantling water tanks and removing exc. 500 but not exc. 1000 ltrs capacity complete all as per specified and as directed by Engineer-in-charge.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position 20mm PTMT float valve complete all as per specified and as directed by Engineer-in-charge.

Dismantling mild steel framed/unframed work of any description not otherwise provided for complete all as per specified and as directed by Engineer-in-charge.

S&F steel work in tubular trusses/posts including special shaped washer etc. complete using ERW or induction but welded tubes conforming to IS-1161-1979 grade St-240 complete all as per specified and as directed by Engineer-in-charge.

Material and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gda 165 complete all as per specified and as directed by Engineer-in-charge.

M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or grith complete all as per specified and as directed by Engineer-in-charge.

Demolition of brick work built in cement mortar including all quions, arches pillars etc. complete all as per specified and as directed by Engineer-in-charge.

M&L brick work built in CM 1:4 with sub class "B"old size bricks straight or curved on plan exceeding 6 m mean radius complete all as per specified and as directed by Engineer-in-charge.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position complete all as per specified and as directed by Engineer-in-charge.

M&L 2nd class hardwood in scantling wrought timber unframed and fixed complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal from site complete all as per specified and as directed by Engineer-in-charge.

S&F 15mm dia. G.I. water tubes medium grade with all necessary fitting and fixed in walls/floor etc. complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as per specified and as directed by Engineer-in-charge.

S&F tubes medium grade GI with all fittings fixed to walls and ceiling or laid in floors 20mm bore complete all as per specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any hickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as per specified and as directed by Engineer-in-charge.

S&F 3 mm thick ordinary quality sheet glass in squares not exc. 0.5 sqm in each pane glazing with oil putty complete all as per specified and as directed by Engineer-in-charge.

S&F 3 mm thick figured glass in squares not exc. 0.5 sqm in each pane glazing with oil putty complete all as per specified and as directed by Engineer-in-charge.

S&F 25 x 3mm FI hold fast conforming to Fe 290, Gde -E-165 complete all as per specified and as directed by Engineer-in-charge.

M&L PCC 1:3:6 type C-1 20mm grade aggregate as in filling of chowkhats hold fast or any other work or similar work complete all as per specified and as directed by Engineer-in-charge.

S&F mild steel medium weight cold rolled butt hinges 75 mm long complete all as per specified and as directed by Engineer-in-charge.

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long complete all as per specified and as directed by Engineer-in-charge.

S&F in repair Stainless steel wire cloth 0.36 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs PVC 20mm ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 15mm -142 gms/20mm- 210 gms/25mm 455 gms and fixed in position complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling of size 32mm and PVC Waste pipe complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs padestal type bowl and cistern for couple closet (one piece) complete all as per specified and as directed by Engineer-in-charge.

S&F in repair Vitreous China EWC wash down water closet (padestal pattern, white) including PVC Sheet cover complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cement concrete bedding 1:2 complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as per specified and as directed by Engineer-in-charge.

S&F in repair wall mixer, 3-in-1 system with provision for shower, chromium plated, fancy type, 15 mm bore complete all as per specified and as directed by Engineer-in-charge.

S&F in repair brass CP shower rose of size 125mm swivel type fix to iron pipe complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15mm stop valves cast copper alloy with fancy type chromium plated with long shank and cup (concealed type) for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15mm angle stop valves cast copper alloy, fancy type with chromium plated for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge.

S&F in repair gate valves of 25mm size, with iron wheel head, screwed both ends for iron pipe complete all as per specified and as directed by Engineer-in-charge.

Dismentling and breaking up 100mm/75 mm bore drain pipes AC /CI/PVC set in cement mortar complete all as per specified and as directed by Engineer-in-charge.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or floor complete all as per specified and as directed by Engineer-in-charge.

S&F of 150 mm internal diameter of double wall corrugated (DWC) high density polyethelene pipes (HDPE) and stiffness classes-8 (SN-8) with ISI marked (with CML no) with and including all fitting & jointing material for sewage line and laid in trenches as specified in IS 16098-2013 part-2 complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs PVC (SWR) bends any radius 110mm bore with access door complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC (SWR) junction single (single 'T') equal or unequal 110mm bore complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as per specified and as directed by Engineer-in-charge.

S&F in repair pillar cock 15mm dia CP fency type complete all as per specified and as directed by Engineer-in-charge.

M&L 10mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 2% by the weight of cement complete all as per specified and as directed by Engineer-in-charge. Note -WPC will be measured and paid seperately.

Supply only integral water proofing compound comfirming to IS complete all as per specified and as directed by Engineer-in-charge.

M&L 5mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L two coats of synthetic enameled painting over 1 coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth complete all as per specified and as directed by Engineer-in-charge.

M&L preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as per specified and as directed by Engineer-in-charge.

M&L for two coats of cement base paint over a coat of primer including preparation of new surfaces of wall complete all as per specified and as directed by Engineer-in-charge.

M&L applying two coats of distemper over a coat of 3 mm thick a layer of wall care putty on walls including preparation of surface complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surface of wall and applying three coats of white wash including preparation of new surfaces complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash including preparation of new surfaces complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs bore bib taps standard of PTMT any colour screwed down for iron pipes 15 mm bore (minimum weight 90 gms) complete all as per specified and as directed by Engineer-in-charge.

S&F in repair tublar towel rail 20 mm dia with brass chromium plated complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as per specified and as directed by Engineer-in-charge.

S & F in repair health faucet with 1.00 mtr tube and hook complete all as per specified and as directed by Engineer-in-charge.

S & F in repair jet spray nozzle with PVC tubing, fixing nut & jet flange complete all as per specified and as directed by Engineer-in-charge.

S&F in repair, 300mm MS ordinary rat tail rod pattern door springs including roller and roller plate complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs, floor door stopper 14cm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as per specified and as directed by Engineer-in-charge.

Disconnecting existing tanks exc 500 L and n exc 1000 L, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as per specified and as directed by Engineer-in-charge. Note - (Cleaning repairing, etc. shall be measured and paid separately).

M&L in repairs aluminium repairs for door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as per specified and as directed by Engineer-in-charge.

M&L for petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer checks nuts plunger etc any type of flush complete all as per specified and as directed by Engineer-in-charge.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as per specified and as directed by Engineer-in-charge.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as per specified and as directed by Engineer-in-charge.

S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc complete all as per specified and as directed by Engineer-in-charge.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs corner glass shelves with border to hold the bathing kit minimum width 150 mm and fixed in position complete all as per specified and as directed by Engineer-in-charge.

S&F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S'- type for monkey protection etc complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs toilet paper holder of white vitreous china fixed to walls with chromium plated (CP) brass screws complete all as per specified and as directed by Engineer-in-charge.

Supply and fix in repair plate rack made out of stainless steel sheet 0.5 thick minimum size 800mm (H) x 900mm (W) x 250mm (D) including brackets or fitted with existing shelves complete all as per specified and as directed by Engineer-in-charge.

S&F in repair laminated PVC kitchen cabinets of depth 300mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves and shutters complete including knobs, hinges. fixed to walls in repairs with steel screw and PVC sleeves by drilling holes complete all as per specified and as directed by Engineer-in-charge. (Note : Only front face is to be measured)

All as per serial item 121 above but without shutter.

S&F in repair laminated PVC kitchen cabinets of depth 610mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves and shutters complete including knobs, hinges fixed to walls in repairs with steel screw and PVC sleeves by drilling holes complete all as per specified and as directed by Engineer-in-charge. (Note : Only front face is to be measured)

M&L for 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as per specified and as directed by Engineer-in-charge. Note - Frame work for ceiling shall be measured and paid separately.

M&L for applying two coats of OBD on new surfaces of ceiling over 3mm thick wall care putty including preparation complete all as per specified and as directed by Engineer-in-charge.

M&L decorative cornices/moulding using POP of cross sectional dimesions exc 25 sqcm and n exc 50 sqm as per pattern and design as approved an fixed in position including preparation of surfaces and applying two coats of plastic emulsion paint over a coat of primer complete all as per specified and as directed by Engineer-in-charge.

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 drgee at 150 mm centre to centre and sealing the same complete all as per specified and as directed by Engineer-in-charge.

M&L for taking down of existing roof treatment from roof and fence and covering surface of old concrete roof by picking, sweeping clean and washing down with water remove dust, etc. and applying roof treatement with the following specifications: (a) Rendering 15mm th in cm (1:4) fixed with water proofing compound as per manufacturers instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plaster surfaces for 7 days by ponding water over the roof (leveling course). (b) Applying evenly one coat of cold bituminous primer conforming to IS- 3384-1088@ 0.30 litre per sqm on the cleaned plastered surfaces. (c) Applying layer of APP based polymeric membrane 3mm th (minimum) weighing 3.50 kg per sqm (reinforced with polyster non woven fabric weighing not less than 160 gms per sqm by torch application . The overlap shall not less than 100mm on the reverse direction and 75mm longitudinal direction and sealing overlaps. (e) Applying evenly one coat of aluminium paint of 0.10 ltr sqm over APP based polymeric membrane. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S S.S. Construction

MUKUL CHOUDHURY

RAJKAMAL ENTERPRISE

Bidder Name

M/S KIRAN ENTERPRISE

M/S S.S. Construction

MUKUL CHOUDHURY

RAJKAMAL ENTERPRISE