Renovation of SIPCOT Industrial Innovation Centre (SIIC) at Government ITI Campus, Madurai

Amount

Dismantling Plain Cement concrete etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Brick Partition Walls using II class country bricks of size 8 3/4"X4 1/4" X 2 3/4" in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specifications and as directed by the SIPCOT officers - Ground floor

Plastering with cement mortar 1:4 (One part of Cement and Four part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Painting two coats for Interior and exterior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Painting two coats with Ready Mixed Enamel Paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specifications and as directed by the SIPCOT officers. 75mm thick slab

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Providing a majestic ornamental entry arch of Size 6.00 x 6.00 m will be fabricated using rectangle hollow section of size 100mm x 80mm x 6mm tk, with a sturdy foundation to ensure stability. The arch will feature a prominent name board with elegant lettering, enhancing the aesthetic appeal of the Madurai ITI campus entrance. The steel structure will be finished with a durable coat of paint, while the name board will be designed to showcase the campus's identity, creating a grand and welcoming entrance etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Provide a high-quality acrylic outdoor LED name board of size 12'x4', designed to showcase your brand with maximum visibility. The board features a sleek acrylic face, durable construction, and energy-efficient LED lighting, perfect for outdoor advertising and branding purposes etc., complete complying with standard specifications and as directed by the SIPCOT officers.

LAWN ARRANGEMENTS The industrial area's front lawn will be beautified with a well-manicured landscape design, incorporating vibrant flowers, shrubs, and trees. Decorative lighting will be installed to highlight the lawn and surrounding areas, while stylish seating areas will be created for relaxation and recreation. A small water feature, such as a fountain, will add visual appeal, and company branding elements will be displayed through signage and design elements etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Providing epoxy water-based flooring system will be applied at a thickness of 4mm, providing a durable and chemical-resistant surface suitable for industrial purposes. The system will consist of a primer and a topcoat, ensuring excellent adhesion and impact resistance. The water-based formula ensures a safer application process, and the finished surface will be seamless and easy to clean etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Provision of "Plywood partition size is (54x3.60m) -The wooden partition wall will be constructed using a 2x2 inch wooden frame, with 1/2 inch plywood panels. The frame will be spaced at 16 inches on-center, and the panels will be finished with a coat of paint or stain to match the surrounding surfaces. depending on the design requirements etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work etc., complete complying with standard specifications and as directed by the SIPCOT officers.

supplying and fixing of 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling the rate is inclusive of transportation charges etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications and as directed by the SIPCOT officers.

White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage etc., complete complying with standard specifications and as directed by the SIPCOT officers. - White Colour

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings 100 mm x 75 mm including all charges etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supplying laying and jointing of 25mm dia P.V.C pipes (6Kg/SqCm) as per approved quality and best variety conforming to I.S.S & with I.S.I mark, including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc., complete complying with standard specifications and as directed by the SIPCOT officers.

supply & fixing of RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining with rubber ring joints.600mmdia pipe etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or sandwich nsulatedpanels with external 0.50mm total coated thicknesspre painted Galvalume sheet with rapezoidal roofingprofile having crest height of 38mm at every 333mmspan , whereas internal 0.50mm total coated thicknesspre painted galvanized iron sheet with micro ribbedprofile and the insulation material will bechlorofluorocarbon and hydro hlorofluoro carbon free ,highperformance rigid polyurethane foam (PUF) conformingto IS 12436 having density not less than 40±2Kg/M3,Thermal conductivity (K-Value) 0.024 W/m.K measuredat 10 degree C mean temperature along with necessaryflashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specifications and as directed by the SIPCOT officers. 50mm (+38mm) thick PUF roof panel

Fabricating supplying and fixing of roof with Poly carbonate sheet of 6mm thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC heathed FRLS copper leads from terminals to the fitting etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of Twin box type 4' 20 W LED fitting with CRCA body complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting with 2 nos of 20 W LED tubes. (Higher End) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod with fan clamp with side plates and cross arm of size 450mm (18") etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 400mm (16 inch) wall mount, Oscillating type fan with aerodynamically designedsemi transparent PP three blades for noise free operation with in built Speed regulator with necessary accessories with connections complete (Havells make Accelero HS/ Crompton High Flo Wave/ Usha Maxx Air/Eq.) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1No.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 2 nos.6/16A two module socket,2 nos. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 20A Flush type Wall Socket 32ADP MCB completeset for AC Plug inflush withwall with earth connection (For AC Plug) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 450 mm (18") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of light trap arrangements for 450mm (18") sweep exhaust fan etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 32A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make]etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 63A FP MCB Isolator in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make]. etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB, 18 no 6A to 32A SP MCB as outgoing in flush with wall with earth connection only.Higher End etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as Outgoing in flush with wall with earth connection only. Higher End etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 4 way 7 segment triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 42 protection with 25A 4 pole MCB as incoming and 3Nos 25A DP RCCB with 30mA sensitivity as sub incomer and 12Nos. 6 A to 20A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (Higher End) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5sq.mm copper wire with painting of suitable colour etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and run of 2 of 4sq.mm. PVC insulat ed SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 400A capacity dust and vermin proof cubic panel board with change over switches and interlocking arrangements of size (6ft x 5ft x 1.5 ft) CRCA sheet for outer body and stiffness and doors, switches supports respectively and with supply and fixing of the following interior mounting switches with centre busbar chamber and vertical covers on both side of the busbar chamber at the extreme ends side and confirming to I.S Specification. All the main switches should be L&T / Siemens make only. (1) 400A FP switch disconnector fuse units interior only with HRC fuses double break with interlocking arrangements - 2 nos.(L&T/Siemens make) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and clamping of 3-1/2 x 25 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. aluminium PVC armoured LTUG cable with earth connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. aluminium PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and clamping of 3-1/2 x 70 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. aluminium PVC armoured LTUG cable with earth connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. aluminium PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and Laying of 3 1/2 x 240 sq.mm. aluminium PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and clamping of 3 1/2 x 240 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of brass cable gland for 3 1/2 x 240 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and providing cable end termination of 3 1/2 x 240 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and run of 1 of No.8 SWG GI wire for earth connection etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply, fixing and erection of GI perforated type cable rack system made out of Hot dipped Galvazined cable tray 150 x 60 x2mm with adequate number of support on wall / ceiling etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with rotary compressor operating on refrigerant R-32/non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with star rating of 5 star as per BEE specification and capable of performing the function etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply of 5 KVA Electronic Automatic Voltage Stabilizer etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of angle Iron Frame work to rest the Outdoor unit etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and laying of 1/2" and 3/8" copper refrigerant pipe of 0.8mm thick with 2.5sqmm 3 core chord between indoor and outdoor unit. (Extra beyond 3 mts/AC unit) etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply, Installation, Testing and commissioning of 15 KVA UPS system 3 phaseinput and Single phase output and as per the detailed specification enclosed, Sealed Maintenance free batteries to support 15 KVA for 2 hrs backup complete with intercell connectors & copper cables, battery stand made out of powder coated MS Angles with adeguate support to carry the load of the batterie.The vendor shall submit dimensional GA drawing of complete UPS/ Inverter system battery rack with batteries, Service panel and battery bank calculation etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Supply and fixing of 400A FP disconnector fuse units interior only with HRC fuses double break switch in existing MV panel board etc., complete complying with standard specifications and as directed by the SIPCOT officers.

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%

V V STRUCTURES (BID ID -1442161)

GSPandiyan (BID ID -1442328)