Repairs to Boundary wall/Fencing, Drain, Culvert, Grating ETC and certain B/R Services at 28 ED AFS Amla

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc., complete all as directed.

Demolition of un-reinforced cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level complete all as directed.

Demolition of reinforced cement concrete of any description & any position and disposing of the rubbish materials in low lying areas of defence land all as specified and as directed.

Blank

Dismantling of timber scantling 40 sq. cm and over in section in any position from the un-framed work complete all as directed.

Dismantling of timber as in fillets, post, rafter’s purlins etc., under 40 sq. cm in section in any position from the un-framed work complete.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

Dismantling of Asbestos cement /GI corrugated or semi corrugated sheets as in roof covering complete all as directed.

Dismantling of wall, display board/ceiling board (fibre, pulp, insulation, etc.) or insulation board/slabs/wool of any thickness including cover fillets complete all as directed.

Dismantling fencing wire mesh, chain link fencing/welded mesh of any type all as directed.

Dismantling of Barbed Wire Fencing of any description and size complete all as specified and directed.

Dismantling post or struts (wood,steel,or R.C.C) any section, including taking out embedded portion and making good distrub surface all as directed.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or Reinforced concrete) set in cement mortar internal diametre of pipe 100mm.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc. and disposing rubbish out of the premises complete all as specified and as directed.

Excavation in trenches n exc. 1.5m wide & n exc. 1.5m in depth for foundation etc. and getting out in soft / loose soil.

Excavation in trenches n exc. 1.5m wide , exc. 1.5m but n exc 3.00 m in depth for foundation etc. and getting out in soft / loose soil.

Excavating in soft/loose soil for post holes (or similar holes) each not exc 0.5 cu. m, getting out, removing surplus soil to a distance not exc 50m and making good surface in soft/loose soil complete all as specified & as directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick; watering, ramming/ rolling and finishing to required size, shape, etc, not exceeding 1.5m high from base all as directed. Note: Good earth obtained vide item no 15 & 16 above shall be used.

Removal of excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and directed.

Material and labour for moorum filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and labour plain cement concrete 1:3:6 type C2 using 40mm size graded stone aggregate as in foundation, fillings etc complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping on top of drain walls and the like including necessary form work; weathering slightly rounded or chamfered angles and finishing exposed faces of concrete complete all as specified and as directed.

Material and Labour for pre-cast cement concrete cover block made with plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in slab wall, ducts and like complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:11/2:3 nominal Mix using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams, bases for columns, plinth beams, bases for cloumns, etc all as specified and direcetd.

Material and labour for reinforced cement concrete 1:11/2:3 nominal Mix using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts etc all as specified and directed.

Material & labour for brick work with Fly ash brick (modular bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for walling of random rubble, uncoursed, well bonded,bedded and solidly hearted, built in cement mortar 1:4 all as specified and direcetd.

Material and labour for boulder pitching is grouted with cement and sand mortar 1:6 with random rubble complete all as directed.

Use and waste of form work to sides of Concrete foundatins, footings, bases of columns plinth beams for rough finished surfaces of concrete flat all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piesrs, columns and stanchions etc for rough finished surface of concrete flat all as specified and directed.

Supply and fix mild steel angle in post and struts in fencing fixed independently without connecting plate etc. Fe-290, Gde E-165 complete all as specified and as directed.

Supply and fix framed work such as grill, grating, etc, with end of bars shouldered and/ or riveted, or forget in to spikes, framed guard bars, flat iron, angel, barred iron doors, ladder, framed balusters, walk ways, railings, framework of water tanks and and similer work Fe-290, Gde E-165 complete all as specified and as directed.

Fixing only framed work such as grills, gratings, etc. ladders; framed balusters; walk ways; railings; framework of water tanks and similar works con-forming to Fe280.Gde-E-165

Supply and fix of Mild Screw bolts (Machine Made) with hexagonal or square heads at one end and screwed the other, to be fitted with washers and one hexagonal or square nut exceeding 5 cm but not exceeding 10 cm, diametre of neck 11 to 15 mm complete all as specified and directed.

Material and labour for mild steel TMT bars,10mm dia and over cut to length, bent to shape required, including bending for columns, beams hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

Material and labour for mild steel round bar 10mm dia cut to length bent to shape required including cranking bending spirally for hooping and for straining chain link fencing complete all as specified and as directed

Material and labour for mild steel TMT bars, 5mm dia and over up to including 10mm dia in stirrups, cut to length, bent to shape required, including bending for columns, beams hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

Supply and fix mild steel angle as in stay supporting with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290, Gde-E-165

Supply only mild steel galvanised chain link fencing of mesh size 100X100mm using 3.15mm dia wire fixed to angle iron post straining bolt etc. including supply of line wire complete all as specified.

Fixing only chain link fencing including tightening with nut & bolt / line wires complete all as specified and as directed.

Supply and fix galvanised 2 standred,steel barbed wire 2.24mm dia barbed with 2mm dia baebs at 75mm spacing and straning and fixing to any type of standred rails straining bolt,incl.securing or tying at crossing with and provition of galvanised mild steel wire,staples or steel pins, etc.as in repairs all as directed. Note: (i) Barbed wire shall be IOWA type. (ii) Each line of wire will be measured and paid.

Fixing only galvanised 2 standred,steel barbed wire 2.24mm dia barbed with 2mm dia baebs at 75mm spacing and straning and fixing to any type of standred rails straining bolt, including securing or tying at crossing with and provition of galvanised mild steel wire, staples or steel pins,etc.as directed.

Material and labour for running welding of thickness not exceeding 6mm in repairs complete all as directed.

Material and labour for welding of thickness not exceeding 6mm and length exceeding 2.5cm and not exceeding 5cm in repairs complete all as directed.

Supply and fix powder coated GI snap grid of size 600mm x 600mm for false ceiling with using GI sections of size 19mm x19mmx 0.5mm as a wall angle fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, 32mmx24mmx0.5mm as a Main Tees, 25mm x 27mm x 0.5mm as a Cross Tees including 4mm dia GI hangers upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all specified and as directed.

Supply and fix veneered particle board /tiles of size 600mmx600mm, 4mm thick as in false ceiling for insulation and acoustic purpose, solid core interior grade with decorative face veneers on one side complete fixed with screw/staples as per manufacturers instruction complete all specified and as directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering /cladding to wall/ cladding to roof side, fixed with self tapping screw all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering /cladding to wall/ cladding to roof side, fixed with self tapping screw all as specified and as directed.

Material and Labour for Machine cut kota stone slab flooring 20-25mm thick including 15 mm thick cement screed base in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Material and Labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed/rendering 15mm backing coat in cm 1:4 and jointed with grinding and polishing complete.

Material and Labour for 75mm thick, plain cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection finished even & smooth without using extra cement including use & waste of form work/screed strips to divide the area in panels and making of 10mm wide joints at every 3m interval and at every corner then the gap filled with hot mix of bitumen complete all as specified and as directed.

Material and Labour for plain cement concrete 1:4:8 Type D2, 75mm thick as in sub base complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in sub base/floor finish all as specified and directed.

Material and Labour for 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded aggregate as in floor finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for glazed ceramic coloured digital tiles in vertical surface 350X250X7mm/ 450X350X7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles, 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item No 60 herein before but for vertical surface such as skirting.

Material and Labour for 60mm thick factory made reflective type heavy duty smooth finish cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction casted in rubber/PU mould on a vibrating table of approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed course of sand, filling the joints with coarse sand etc., including vibrating the surface with vibrating machine complete all as specified and as directed. Note: (i) The tiles provided by contractor shall conform to IS 15658-2006.

Material and Labour for 20 to 25 mm thick chequered cement concrete tiles pre-polished 300x300 mm, set and jointed and pointed in neat cement slurry in floor with grey cement and matching pigments complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 as screed layer for wall tiles all as specified and as directed.

Material and Labour for rendering of 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on vertical fair faces of brick/concrete surfaces and finishing the surfaces even and smooth without using extra cement all as specified

Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls including complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

Material and Labour for two coat of cement base paint over one coat of alkali resistant primer paint including preparation of wall surfaces complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and Labour for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, not exceeding 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, not exceeding 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Supply and fix ISI marked 75 mm dia PVC Rain Water pipes single socketed in any length fixed to walls/floor including fixing clamps, screws etc., complete all as specified and as directed.

Material and Labour for grinding of existing kota stone flooring first with machine fitted fine grade blocks No 120 and then final grinding with grit block No 320 and then polishing the surface till mirror finish is achieved complete all as specified and as directed.

Material and labour for granite (of any type) 16-18mm thick (table rubbed and polished) in around column, vertical surfaces flat or in curve shape, steps, jambs, pillers, window-cill, cooking platforms and like in cement mortar (1:4)15mm thick bedding/backing including pointing in white cement (1:2) using marble dust with admixture of pigment or by required approved adhesive with proper clamping arrangement and match with shade of granite all as specified and directed.

Material and labour for mild steel square pipe of size 50x50mm fixed to wall, frame or similar location etc., including necessary welding complete all as specified and as directed

Material and labour for 8mm thick cement fibre premium board planks of 150mm wide (suitable to exterior environment) fix with proper joint and suitable screw, complete all as per manufacturer instruction and applying two coat of apex of approved colour and pattern with preparation of surfaces complete all as directed. Make: Vishaka or equal Note : Cost of cutting and pattern /desgin over cement board deemed to be included in qouted rate.

Material and labour for 12mm thick cement fibre premium board (suitable to exterior environment) fix with silicon joint and fix with proper joint and suitable screw complete all as per manufacturer instruction and applying two coat of apex of approved colour and pattern with preparation of surfaces and cutting of requiredpattern/design complete all as directed. Make Vishaka or equal

Note:- (i) The amount against Schedule of Credit on Page No. 27 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contarct Sum for Acceptance.

vidhamal&sons

Meet Road Lines