Construction of Footbal Stadium with 200Mtr Athletic Track at Kanhaiyachak H/S Parbatta of Khagaria Distt. Under Chief Minister Sports Development Scheme.

Bihar State Building Construction Corporation Limited, Patna

Project:-Construction of Footbal Stadium with 200Mtr Athletic Track At Kanhaiyachak H/S Parbatta of Khagaria Distt. Under Chife Minister Sports Development Scheme.

Bill of Quantity

Sl.No. SOR 2022 Particulars Building B'Wall P.H.E landscap S.Tank Elect. QTY Unit Rate Amount Building B'Wall P.H.E landscap S.Tank Elect.

1 2.8 Earth work in excavation over areas (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposal earth to be levelled and neatly dressed.

2 2.27 Extra for every additional lift of 1.5 m or part thereof in 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

3 2.28 Supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 163.50 7.89 0.28 171.67 cum 287.30 49,321.00 46,973.95 2,266.80 0.00 0.00 0.00 80.44 0.00 49,321.19 0.19

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 78.62 34.02 112.64 cum 123.90 13,956.00 9,740.92 4,215.08 0.00 0.00 0.00 0.00 0.00 13,956.00 (0.00)

5 2.18 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete (Measurements to be taken of the face area timbered): 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. 614.30 52.60 3.75 670.65 sqm 283.30 189,994.00 174,029.97 14,901.58 0.00 0.00 0.00 1,062.38 0.00 189,993.93 (0.07)

7 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

8 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: 2.70 2.70 cum 1411.20 3,810.00 0.00 3,810.00

9 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

10 5.33A.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All works above plinth level upto floor V level 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

11 5.33A.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All works above plinth level upto floor V level 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

5.33A.2.2 Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. 24.46 26.08 50.54 cum 5677.20 286,945.00 138,883.73 148,061.38 0.00 0.00 0.00 0.00 0.00 286,945.11 0.11

12 Add or deduct for providing richer or leaner mixes respectively at all floor levels. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

13 5.22 Providing Reinforcement for R.C.C. work etc. all complete job as per direction of E/I 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

14 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

15 6.1A Brick work with 100A bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

18 5.90 Centring and shuttering including strutting,propping etc. and removal of form for. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

(c) 5.9.5 Centering and shuttering in Lintel beam , plinth beam etc. 121.95 75.73 197.68 sqm 404.70 80,001.00 49,353.33 30,647.93 0.00 0.00 0.00 0.00 0.00 80,001.26 0.26

(e) 5.9.16 Edges of slabs and breaks in floors and walis 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

19 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1993.90 1,993.90 sqm 21.70 43,268.00 0.00 43,268.00 0.00 0.00 0.00 0.00 0.00 43,268.00

20 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 662.01 2104.15 2,766.16 sqm 141.50 391,411.00 93,673.75 297,737.22 0.00 0.00 0.00 0.00 0.00 391,410.97 (0.03)

21 13.18 Providing and laying 15mm thick C.P. (1:4) with punning with water proofing materials all complete job 52.93 52.93 M2 229.30 12,138.00 12,137.86 0.00 0.00 0.00 0.00 0.00 0.00 12,137.86 (0.14)

22 13.24.2 Providing 6mm thick C.P. (1:4) in ceiling etc. all complete job as per direction of E/I 110.43 110.43 sqm 125.60 13,869.00 13,869.44 0.00 0.00 0.00 0.00 0.00 0.00 13,869.44 0.44

23 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 40.00 40.00 sqm 203.6 8,144.00 0.00 0.00 0.00 0.00 0.00 8,144.00 0.00 8,144.00 0.00

24 13.12 15 mm cement plaster on rough side of single or half brick wall of mix. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

25 9.21 P & F ISI marked flush door shutters conforming to IS : 2202 (Part 1) non-decorative type core of block of board construction with frane of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 30.37 30.37 sqm 1775.30 53,917.00 53,916.75 0.00 0.00 0.00 0.00 0.00 0.00 53,916.75 (0.25)

26 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

27 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 5.76 5.76 sqm 6303.40 36,308.00 36,307.58 0.00 0.00 0.00 0.00 0.00 0.00 36,307.58 (0.42)

28 10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. 15.84 15.84 sqm 3038.90 48,136.00 48,136.18 0.00 0.00 0.00 0.00 0.00 0.00 48,136.18 0.18

29 10.13 Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

30 10.15 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by . mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-incharge: 10.15 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

10.15.2.1 Fixing with adjustable lugs with split end tail to each jamb 83.31 83.31 M 432.60 36,040.00 36,039.91 0.00 0.00 0.00 0.00 0.00 0.00 36,039.91 (0.09)

31 10.4 Providing and fixing 1 mm thick M.S.sheet sliding - shutters with frame and diagonal braces of 40x40x6 mm angle iron,3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top bottem respectively including applying a priming coat of approved steel primer. 0.00 0.00 kg 4279.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

32 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

33 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 22.36 22.36 SQM 1334.90 29,844.00 29,843.79 0.00 0.00 0.00 0.00 0.00 0.00 29,843.79 (0.21)

34 11.40 Providing and laying Ceramic glazed floor tiles 400x400 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 19.38 19.38 sqm 1414.00 27,410.00 27,410.11 0.00 0.00 0.00 0.00 0.00 0.00 27,410.11 0.11

35 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 92.40 92.40 sqm 795.00 73,458.00 73,458.00 0.00 0.00 0.00 0.00 0.00 0.00 73,458.00 0.00

36 13.75 DDistempering with dry distemper of approved brand and manufacture(two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade. 772.43 772.43 M2 70.50 54,456.00 54,456.37 0.00 0.00 0.00 0.00 0.00 0.00 54,456.37 0.37

37 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 772.43 772.43 m2 105.40 81,414.00 81,414.21 0.00 0.00 0.00 0.00 0.00 0.00 81,414.21 0.21

38 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 238.20 2104.15 2,342.35 M2 137.00 320,903.00 32,634.06 288,268.55 0.00 0.00 0.00 0.00 0.00 320,902.61 (0.39)

39 13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

40 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 51.78 51.78 SQM 436.60 22,607.00 22,607.15 0.00 0.00 0.00 0.00 0.00 0.00 22,607.15 0.15

41 10.18 Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. 8.00 8.00 Nos 165.40 1,323.00 1,323.20 0.00 0.00 0.00 0.00 0.00 0.00 1,323.20 0.20

42 10.29 Providing and fixing bright finished brass peg stays to steel ventilators with necessary welding and machine screws etc. complete. 18.00 18.00 Nos 182.70 3,289.00 3,288.60 0.00 0.00 0.00 0.00 0.00 0.00 3,288.60 (0.40)

43 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

44 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

45 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

46 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

47 16.19 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10 mm dia. etc. complete. 665.84 665.84 kg 94.80 63,121.00 63,121.29 0.00 0.00 0.00 0.00 0.00 0.00 63,121.29 0.29

48 16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

49 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth ) 34.28 34.28 RM 178.30 6,112.00 6,112.45 0.00 0.00 0.00 0.00 0.00 0.00 6,112.45 0.45

50 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 4.00 4.00 Nos 189.40 758.00 757.60 0.00 0.00 0.00 0.00 0.00 0.00 757.60 (0.40)

51 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

22.8.1 With average thickness of 120 mm and minimum thickness at khurras point to be 65 132.41 132.41 sqm 850.70 112,644.00 112,643.58 0.00 0.00 0.00 0.00 0.00 0.00 112,643.58 (0.42)

52 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 334.76 334.76 sqm 721.10 241,395.00 241,395.44 0.00 0.00 0.00 0.00 0.00 0.00 241,395.44 0.44

53 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

10.32.2 In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works 1171.00 1,171.00 kg 114.60 134,197.00 134,196.60 0.00 0.00 0.00 0.00 0.00 0.00 134,196.60 (0.40)

54 10.33.1 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

56 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: 0.00 0.00 45,067.92 0.00 0.00 0.00 0.00 0.00 0.00 45,067.92 45,067.92

17.1.1 White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests. 1.00 1.00 Each 4470.90 4,471.00 0.00 0.00 4,470.90 0.00 0.00 0.00 0.00 4,470.90 (0.10)

57 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

58 17.3.1 White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests. 4.00 4.00 Each 5504.30 22,017.00 0.00 0.00 22,017.20 0.00 0.00 0.00 0.00 22,017.20 0.20

59 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls andfloors wherever required etc all complete jobs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 2.00 2.00 Each 3723.20 7,446.00 0.00 0.00 7,446.40 0.00 0.00 0.00 0.00 7,446.40 0.40

60 17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

61 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 5.00 5.00 Each 1500.00 7,500.00 0.00 0.00 7,500.00 0.00 0.00 0.00 0.00 7,500.00 0.00

17.31 Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. 5.00 5.00 Each 1068.50 5,343.00 0.00 0.00 5,342.50 0.00 0.00 0.00 0.00 5,342.50 (0.50)

62 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not lessthan 190 gms 5.00 5.00 Each 424.00 2,120.00 0.00 0.00 2,120.00 0.00 0.00 0.00 0.00 2,120.00 0.00

63 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5.00 5.00 Each 146.30 732.00 0.00 0.00 731.50 0.00 0.00 0.00 0.00 731.50 (0.50)

64 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

65 18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 4.00 4.00 Nos 108.00 432.00 0.00 0.00 432.00 0.00 0.00 0.00 0.00 432.00 0.00

66 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 1,000.00 lit 9.70 9,700.00 0.00 0.00 9,700.00 0.00 0.00 0.00 0.00 9,700.00 0.00

67 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including, cutting and making good the walls etc. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

69 18.11 Providing and fixing G.I.Pipes complete with G.I fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

18.16 Providing and fixing brass stop cock of approved quality. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

71 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end). 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

72 18.33 Constructing masonry Chamber 60x60x75cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 3.00 3.00 Each 7210.60 21,632.00 0.00 0.00 21,631.80 0.00 0.00 0.00 0.00 21,631.80 (0.20)

73 18.49 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

74 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

75 18.52 Providing and fixing C.P. stop cock (concealed) of standard design and of approved quality conforming to IS : 8931 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

76 18.53 Providing and fixing C.P. brass,angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

77 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

78 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

80 12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

81 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 19.00 19.00 Each 47.90 910.00 0.00 0.00 910.10 0.00 0.00 0.00 0.00 910.10 0.10

19.1 Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

83 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

84 19.16 Providing orange colour safety foot rest of minimum 6 mm thickplastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be isible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

85 19.32 Making soak pit 2.5m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100 mm diameter, 1.8m long complete as per standard design. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

86 19.33 Constructing soak pit 1.20 x 1.20 x 1.20m filled with brickbats including S.W drain pipe 100mm diameter and 1.20m long complete as per standard design. 1.00 1.00 Each 4117.30 4,117.00 0.00 0.00 4,117.30 0.00 0.00 0.00 0.00 4,117.30 0.30

87 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

88 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

89 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level etc all complete jobs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

90 24.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

91 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -incharge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

92 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-incharge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

93 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

94 24.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

95 24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

96 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 16.00 16.00 Cum 1343.20 21,491.00 0.00 0.00 21,491.20 0.00 0.00 0.00 0.00 21,491.20 0.20

97 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 12.00 12.00 hour 916.80 11,002.00 0.00 0.00 11,001.60 0.00 0.00 0.00 0.00 11,001.60 (0.40)

98 AR S/F/F 1 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job. 1.00 1.00 Each 19980.00 19,980.00 0.00 0.00 19,980.00 0.00 0.00 0.00 0.00 19,980.00 0.00

99 2.25(A) Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment). 0.00 0.00 1623.18 1,623.18 cum 411.70 668,261.00 0.00 0.00 0.00 668,261.21 0.00 0.00 0.00 668,261.21 0.21

100 23.9 Mixing earth and sjudge or manure in porportion specified or directed. 1623.18 1,623.18 cum 20.90 33,924.00 0.00 0.00 0.00 33,924.36 0.00 0.00 0.00 33,924.36 0.36

101 23.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately). 1623.18 1,623.18 cum 30.10 48,858.00 0.00 0.00 0.00 48,857.57 0.00 0.00 0.00 48,857.57 (0.43)

102 23.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rought dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 5410.58 5,410.58 100 sqm 3418.20 184,945.00 0.00 0.00 0.00 184,944.58 0.00 0.00 0.00 184,944.58 (0.42)

103 23.10 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free form weeds and fit for moving including supplying good earth if needed. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

104 AR Providing and Supply Pitch Roller (Hand Roller, 1.5 tone) 1.00 1.00 each 89,087.00 89,087.00 0.00 0.00 0.00 0.00 89,087.00 0.00 0.00 89,087.00 0.00

105 AR Providing and Supply Grass Cutter (Honda, Petrol Lawn mover) 1.00 1.00 each 120,610.00 120,610.00 0.00 0.00 0.00 0.00 120,610.00 0.00 0.00 120,610.00 0.00

Electrical 0.00

1 1 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required 0.00

2 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required. 2 Each 358 716.00

3 1.5 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 No 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. 350 Metre 309 108,150.00

4 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface /recessed PVC conduit as required. 0.00

1.7.2 2x2.5 Sq.mm +1x2.5 Sq.mm earth wire 350 Metre 246 86,100.00

1.7.4 2 x 6 sq.mm + 1 x 6 sq.mm. earth wire 80 Metre 422 33,760.00

5 1.22.7 Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required. 2 Each 311 622.00

6 1.32 Supplying and fixing suitable GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required. (for power plug ). 15 Each 531 7,965.00

7 1.31 Supplying and fixing suitable size G.I Box with modular plate and cover in front on surface in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc., as required. (for light plugs to be used in non residential buildings ). 10 Each 414 4,140.00

8 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 2 Each 4184 8,368.00

9 2.12 Supply & fixing following rating 240/415 volts c curve miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. 0.00

2.12.1 6/32 amp single pole 24 Each 237 5,688.00

10 2.15 Supply and fixing following rating double pole 240 volts isolator in the existing MCB DB complete with connections testing and commissioning etc as required. 0.00

2.15.2 63 amps, Double pole 1 Each 529 529.00

11 2.4 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

12 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 0.00

13 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required 0.00

2.12.4 50/63 amps, Single pole and neutral 2 Each 1282 2,564.00

14 2.7 Supplying and fixing following rating and pole, 240/415 volts, MCB type changeover in the existing MCB DB complete with connections, testing and commissioning etc. as required. Each 0.00

15 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 18 sqft 1809 32,562.00

16 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6536 6,536.00

FIXTURE FITTING 0.00

17 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 2 Each 2482 4,964.00

18 8.17.1 Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required. 8 Each 2572 20,576.00

19 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.5 12 watt LED lamp 4 Each 239 956.00

20 8.19 Supply and installation of 400 mm, 230 v A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required. 7 Each 3670 25,690.00

21 5.7.6 Supplying and fixing recess/surface mounted 23/24 (1ft X 1ft) watt LED downlighter complete with integrated electronic driver & LED directly on ceiling/false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. 13 Each 2049 26,637.00

22 5.2 Supplying and fixing single wall mounted 9/10 watt (2 ft long) LED type batten fitting complete with electronic driver and LED etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required. 4 Each 492 1,968.00

23 5.10 Supplying and fixing Surface mounted 10/12 watt LED type Bulk-head fitting comprising of pressure die cast housing with acrylic diffuser (IP65) and complete with integrated electronic driver etc directly on wall/ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. 2 Each 1275 2,550.00

STREET LIGHT 0.00

24 MR Supply and fixing of TLL 50WATT all in one street light along with MONo Crystalline 50 Wp solar panel and 308 wh Lithium battery aluminium housing , LED rating -50000Hr@LM70, Efficacy Lumen /watt> 130,CRI->70, charge controller. Type MPPT, SENSOR Type -PIR Dusk to down Operation,TLL-jupitor-AIO50 10 Each 75377 753,770.00

25 8.22 6 mtr height octagonal hot dip galvanized street light poles with top dia (A/F) 70 mm and bottom dia (A/F) 155 mm and made of 3 mm thick sheet base plate diamention 260x260x16 mm including suitable size foundation bolts etc 0.00

27 8.2 Providing and making steel pole collar with cement concrete 1:3:6 (1 cement:3 coarse : 6 stone aggregate of 20mm )of specified size and shapeincluding form work plastering if required curing etc as required (volume of pole /pipe not to be deducted) 10 each 6399 63,990.00

28 5.14.4 Suppli and fixing 90 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc on pole/building including connection with FR PVC insulated copper conductor cable and earthing body etc as required. 4 Each 5516 22,064.00

EARTHING/ MAINS CABLE 0.00

29 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 2 Set 16675 33,350.00

30 3.19 Providing and fixing 4.00 mm dia.copper wire on surface or in recess for loop earthing as required. 20 meter 122 2,440.00

31 7.7 Supplying and fixing of one number Armoured Copper cable of 1.1 KV grade of size on surface as required 0.00

32 7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including exacavation, sand cushioning protective and refilling the trench etc as required. 0.00

7.1.1 Upto 35 sq.mm 140 meter 315 44,100.00

33 AR SITC of 15 LPH RO+UV Water Purifier with Water Cooler of 40 Ltrs Capacity with Powerful Fan,CFD Technology,Tap & Uniform cooling and Drain System Make:-USHA/KENT/VOLTAS/AQUAGUARD/BLUESTAR//CLIMATROL

#REF! #REF! #REF! #REF! #REF! #REF! #REF!