REPAIR MAINT TO JOINERY WORK AND CERTAIN B AND R REPAIR WORK IN MD OTM ACCN AND REPAIR MAINT TO BRICK PCC FLOORING PLUMBING SANITARY FITTINGS JOINERY AND ALLIED WORK IN FOLLOWERS MD ACCN IN POCKET 9 IN AGR B R III SAHARANPUR UNDER GE ROORKEE

Amount

Taking down chowkhat with shutter .exe 1.50 sqm and nexe 4 sqm( without taking off shutter) each complete all as specified and as directed.

Taking down chowkhat with shutter n.exe 1.50 sqm (without taking off shutters) each complete all as specified and as directed.

Taking down any description shutters exe 1 Sqm but n exc 2 sqm each complete all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and as directed.

S&F Factory made 35 mm thick 2nd H.W plain framed paneled shutters( two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003(part I ) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd Class H.W Glazed and skeleton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator stiles and rails as specified in SSR Part I section 8 clause 8.24 (b) complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauge,etc sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 (a).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and as directed.

M&L framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0. complete all as specified and as directed.

S & F 2nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200 cu cm each complete all as specified and as directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.(Make:-Rajshri,Sintex)

S&F Factory made solid panel PVC door shutter o 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at site as per specification and drawing.( Make: Rajshri, Sintex)

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks for hold fast including necessary formwork complete all as specified and as directed.

S & F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and as directed.

S & F butt hinges extruded aluminium alloy with galavanised mild steel hinge pin anodised and fixed type 75mm size C22 complete all as specified and as directed.

S&F MS Butt hinges medium weight cold rolled 100mm size complete all as specified and as directed.

S&F MS Butt hinges medium weight cold rolled 75mm size complete all as specified and as directed.

S&F MS Butt hinges medium weight cold rolled 50mm size complete all as specified and as directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and as directed.

S&F in mild steel pressed handles, 150mm long, oval type, stove enameled black complete all as specified and as directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

S&F mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and as directed.

M&L preparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating with creosote oil ends of posts, back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each complete all as specified and as directed.

All as per BOQ item No. 26.00 here-in-before but treating small articles such as holdfasts, end of posts, backs of chowkhat, etc area n. exc. 0.1 sq m each, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and as directed.

S&F 3mm thick sheet glass pin headed type and glazing with oil putty in square n.exc. 0.5 sqm each pane complete all as specified and as directed.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and as directed.

S&F 150 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples as in repair complete all as specified and as directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of new or previously untreatedwooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm girth or width and applying a coat of synthetic enamel paint complete all as specified and as directed.

M & L for rendering 12 mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plaster and Preparation of new plaster surfaces of wall and applying two coat of oil bond distemper over a coat of primer complete all as specified and as directed.

M & L for rendering 12mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plaster and preparation of new plaster surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including taking down old cement plaster and preparation of new plaster surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and as directed by Engr -in- charge .

Materials and labour, brick work with sub class ‘B’ bricks straight curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.

All as per item No. 40.00 here-in-above but except bricks complete all as directed. Note :- Serviceable bricks obtained from demolition against item No 40.00 here-in-before shall be reused.

M&L 12 mm thick rendering in cement mortar 1:4 in fair faces of brick work/concrete surfaces finished even and smooth ( With out using extra cement) including preparation of new plaster surfaces of wall and applying three coats colour wash complete all as specified and directed by Engr - in - charge.

M&L 12 mm thick rendering in cement mortar 1:3 in other than fair faces of wall of brick work/concrete surfaces finished even and smooth ( With out using extra cement) complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20 mm grade stone aggregate) as in coping at wall of trough including necessary form work and demolition of old cement concrete ( unreinforced) complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.completeall as specified

M&L PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courseat roof padding (avg thickness 40mm) complete all as specified.

M&L for machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish,complete all as specified and directed

M&L for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and grinding and polishing, including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed.

Dismantling of brick in floor laid dry on flat or on edge as in floor complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and filling the joints with same. complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and pointed with cement mortar 1:3 complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and filling the joints with same (except brick).complete all as specified.

Dismantling plain of corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr - in - charge.

S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked bolt and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engr - in - charge.

S&F .63 mm plain galvanized mild steel sheeting in ridges , hips, valley gutters, drips and straight flashing (Length and Girths as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr - in - charge..

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports etc complete all as specified and directed by Engr - in - charge..

Dismantling of timber scantling under 40 sqcm in purlins etc complete all as specified and as directed.

S&F wind ties/purlins fixed independently for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F mild steel section of tubular beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for preparation of new or previously untreated steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering complete all as specified and as directed.

M&L 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs , wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.

M&L asbestos cement serrated ridges for corrugated sheets or semi corrugated sheets fixed with L or J type or cranked hook bolts, complete all as spfd & directed.

Fixing only 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs , wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.

S&F solid PVC wall lining consisting of 5.0 mm thick plain colour PVC sheet incluisive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed.

RAM PRAKASH AND ASSOCIATES

VERDHMAN ASSOCIATES

AMARJEET SINGH AND CO.

M/S. DEV ASSPOCIATES

Bidder Name

Nanda Brothers