Renovation of Staff Branch Room No. 419-420 in Sanchar Bhawan, New Delhi

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

c) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supply & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 3 x 1.5 sq. mm

b) 6 x 1.5 sq. mm

c) 3 x 4 sq. mm

d) 6 x 4 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. a) 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20mm

Supply & fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make: Anchor-Roma/ Crabtree/ Havells/ MK/ North West/ Standard) a) 5/6 amps switch

b) 15/16 amp switch

c) 3 pin 5/6 amp socket outlet

d) 6 pin 15/16 amp socket outlet

e) Blanking Plate

Supply & fixing suitable size GI box with modular plate and cover in front on surface or in recess etc. as required. a) 2 Module

b) 4 Module

c) 6 Module

Supply & fixing 5 A to 32 A rating, 240/415 volts, 10 kA, "C" curve, MCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supply & fixing following isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A, Double Pole, 240 V

b) 100 A, Four Pole, 415 V

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. a) 1 run of cable

b) 2 run of cable

c) 3 run of cable

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (M/S Polycab/Havells/Plaza Make). a) 4 Pair

b) 20 Pair

Supplying, Installation, Testing & Commissioning of Energy Efficient Ultra modern recess type 595mm x 595mm size LED luminaire having the following specifications with high brightness SMD LEDs as light source etc. complete as reqd in all respect to the entire satisfaction of Engineer-in-charge (Make: Phillips, Havells, Wipro): - a) Wattage : 36 Watt + 10% b) System lumens efficacy : Not less than 100 lumen per watt c) Driver efficiency : Not less than 85% d) THD : Not more than 10% e) CRI : Not less than 80 f) UGR : Less than 19% g) LED Life : Not less than 50000 hours @ LM 70% h) Colour temperature : 5500 - 6500 K i) Operating voltage range : 140 Volt to 270 Volt j) Installation type : Recess Ceiling installation K) Material of construction for housing : CRCA powder coated white after phosphochromate treatment l) Material of construction for cover : Scratch resistant and polycarbonate diffuser / cover m) Electronic Driver : independent Isolated type (Constant current supply) n) Internal surge protection : Not less than 2.5 kV o) Ingress protection (IP) : Not less than 20

Supplying, Installation, Testing & Commissioning of Energy Efficient Ultra modern recess type Æ 138 mm x 90 mm size LED luminaire having the following specifications etc. complete as reqd in all respect to the entire satisfaction of Engineer-in-charge (Make: Phillips, Havells, Wipro): - a) Wattage : 15 Watt + 10% b) System lumens efficacy : Not less than 100 lumen per watt c) Driver efficiency : Not less than 85% d) THD : Not more than 10% e) CRI : Not less than 80 f) LED Life : Not less than 50000 hours @ LM 70% g) Colour temperature : 5500 - 6500 K h) Operating voltage range : 140 Volt to 270 Volt i) Installation type : Recess Ceiling installation j) Material of construction for housing : pressure die-cast aluminium heat sink for efficient dissipation & white finish polycarbonate ring / Aluminium extruded k) Material of construction for cover : polycarbonate opal concave diffuser l) Electronic Driver : Integral type (Constant current supply) m) Internal surge protection : Not less than 2.5 kV n) Ingress protection (IP) : Not less than 20.

Supply and fixing of following type heavy duty exhaust/ wall/ ceiling/ pedestal fans suitable for operation on 230V, 50 Hz single phase AC Supply i/c dismentaling/ refixing, minor civil works if reqd. making connection testing and commissioning etc complete as reqd. (M/S Almonard/ Crompton/ Havells/ Usha/ Orient Make) a) 400 mm sweep, 1350 rpm, Plastic body wall fan

Supplying and fixing of following sizes G.I raceway with accessories/fittings having front openable cover fabricated out of 16/14 SWG GI Sheet, on surface / in recess , making good the damages comp. as reqd. a) 100mm x 50 mm

Supplying and fixing of following Equipments/accessories for local area networking of computers through database servers etc. as reqd. a) CAT 6 information outlet plate i/c RJ45 Jack. (M/S Digilink/D-Link/Netgear/AMP Make)

b) Patch cord Cat 6 (1m)

c) RJ 45 connector

e) 24 Way Patch Panel (M/S Digilink/D-Link/Netgear/AMP Make)

SPECIAL CONDITIONS OF CONTRACT 1. The tenderer will have to produce an 5 years (as per page 62 & 63) and after sales support for TEN years authorization letter of OEM specific to this tender on printed letter head in ORIGINAL of the OEM. 2. The rates should be inclusive of all taxes. 3. The material under replacement shall be as per schedule/ product directory and the dismantle material will be property of the contractor. The rates should be quoted accordingly. 4. Acceptance and routine tests shall be carried out at the manufacturer’s in house laboratory (duly NABL accredited) or any NABL accredited lab) See: Detailed Relevant Condition LM-79 & LM-80 for luminaries etc. (as per page 8 & 14). Decision of Engineer-in-charge will be final. 5. Skilled manpower will be deployed by the agency at site along with required tools and plant etc. to keep all the services operational upto the required standards & to receive the complaints and for co-ordination for the work. For this, one mobile no. with whatsapp facility will be provided by the agency. 6. Adequate inventory of material will be kept at site by the agency for prompt attending the complaint. 7. Complaint received in Fore Noon will have to be attended by After Noon and complaints received in Afternoon will have to be attended by Forenoon of next day. Emergency complaints, if any, will have to be attended immediately at any time including odd hours. 8. Penalty of Rs. 500/- per complaint per day will be imposed for non-compliance of the complaint. If at any stage, it is observed that the performance of agency is not adequate, work will be rescinded, and the agency will be debarred from doing any work for one year in Delhi region. The work will then be carried out at his risk and cost without serving any notice 9. The Agency should quote amount keeping in view all Statutory requirements including minimum wages/ESI/EPF etc.

Note:- 1. The Agency has to submit police verification record & ID proof of each operator. 2. The firm shall provide each operator with working cell phone. 3. The operators may be deputed for duty as per instruction of concerned SDE (E)/JTO (E). 4. Penalty shall be imposed in case of absence of any operator as per T & C of contract. 5. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 6. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 7. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 8. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 9. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 10. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 11. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 12. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 13. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 14. Bidder must mandatorily mention HSN & SAC numbers. 15. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company:

SS ASSOCIATES