Loading
Loading…
Loading…
Tender Value
₹1.3 L
EMD Value
₹3,750
Closing Date
29 Sept 2026, 1:00 pm2d left
Executive Engineer PHE Division Kupwara
Executive Engineer PHE Division Kupwara
Providing of drinking water supply to Warsun COB CDF
2026_PHE_325785_1
27 of 09/2026
Open Tender
Civil Works
Percentage
30 days
Kupwara
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Yes
Treasury
₹3,750
Yes
24 Sept 2026
24 Sept 2026
29 Sept 2026
24 Sept 2026
29 Sept 2026
24 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthwork in excavation by manual means in trenches for foundations, drains, pipes cables etc. (Not exceeding 1.5m in width) and for shafts, wells cesspits and the like, not exceeding 10sqm on plan, depth upto 1.5m incl. disposal of excavated earth upto 1mtr. from cutting edge disposed earth is to be leveled and neatly dressed | - | - | - | - |
| 2 | All kinds of Soil | 31.05 | Cum | 479.3 | ₹14,882.27 |
| 3 | Providing and fixing of G.I. pipes complete with Gi fittings excl, trenching and refilling etc (external work) Light Class | - | - | - | - |
| 4 | 20m dia | 414 | Mtrs | 227.9 | ₹94,350.6 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. | 27.95 | cum | 218.4 | ₹6,104.28 |
| 6 | Providing & Fixing Gun Metal Gate Valve with CI wheel of approved quality (screwed end) | - | - | - | - |
| 7 | 40mm dia | 1 | No | 834.6 | ₹834.6 |
| 8 | 20mm dia | 1 | No | 691.7 | ₹691.7 |
| 9 | Making Connection of GI Distribution branch with Gi main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc (complete. (15 to 40mm nominal bore) | 1 | No | 730.3 | ₹730.3 |
| 10 | Providing, fabricating and installing display/signage board complete in all respects, including angle iron (40×40×4 mm, total length 14 ft) framing, 2 mm thick MS sheet plate back (6 ft × 3 ft), cutting, welding, hoisting, anti-corrosive painting (one coat primer and two coats synthetic enamel), sign writing with letters not less than 40 mm size (minimum 75 words), earthwork excavation, casting 2 nos foundation blocks of size 0.45 m × 0.45 m × 0.45 m each nominal mix 1:2:4, mix backfilling, curing and all sorts of carriage complete job | 1 | No | 7,500 | ₹7,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.59 MB
BOQ_1101381.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .