PROVN OF 81 BOUNDARY PILLAR AND INSTALLATION FOR A1 DEFENCE LAND AT MOUZA DALAN (3 MADRAS) AND PROVN OF WAITING SHED 6M X 5M WITH CHEQUERED TILE FLOORING AT SIRSA CAMP (STN HQ) FOR EX SERVICEMEN AT MIL STN KATIHAR (2ND CALL

Amount

Excavation in Post holes ( or similar holes ) in hard dense soil, each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering , and removing surplus soil to a distance n exc 50 M and making good surface.

M&L for PCC 1:3:6 type C-2(using 40mm graded broken stone agg) as in foundation, filling mass concrete.

M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) In precast posts, fencing postts, straining or terminal postts, struts etc. for fencing, average sectional area in exc 100 sq. cm, n.ec 250 sqm cm with or without chamfered angeles and flat, splayed, rounded or mitred tops as directed and fixed.

M&L deformed TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips quality conforming to Fe - 410 W (Gde E-250) quality - A for Fe 290 (Gde E-265) .

Ditto all as per item no 4 but 5mm to 8mm dia for stirrups, spacers and binders

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep in soft/loose soil and getting out.

Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder 100 mm thick as specified and directed.

M/L 75 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mm graded aggregate )

M&L for 40 mm thick cement concrete 1:2:4 type B1 (using 20.00mm graded stone aaggregate) in floor finished even and smooth without using extra cement complete all as specified and directed.

S&F pre- painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in specified

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exceeding 10cm in width or girth complete all as specified and directed.

M & L for steel work in joist, channel,angle,tubular section or tee section without connecting plates,incl necessary welding for connecting each other completed

M&L chequred cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors set with grey cement and no pigment laid over 15mm thick screed bed in cement mortar (1:6) complete all as spd and directed.

M/s. Rakesh Roshan (BID ID -3235944)