PERIODICAL SERVICES AND REPAIR TO FLOORING, PLASTERING , JOINERY AND PLUMBING WORK FOR ZONE-I AND CERTAIN REPAIRS TO DRAINS, BOUNDARY WALL , PATH, HARD STANDING AND MISC REPAIRS UNDER AGE B/R-II OF GE NAGROTA.

Amount

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L brick work with sub class 'B' bricks in 1:6 cement mortar on straight or curved on plan exc 6 m , complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces (internal) in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3 mm thick, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles (first quality) of size 300 mm x 200 mm x 7 mm as in vertical surface, dado/skirting, over and including 10 mm thick plaster in CM 1:4, complete all as specified and directed.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile exceeding 0.36 sqm but n exc 0.42 sqm, in floors, set and jointed with neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick bedding layer of cement mortar for laying floor finishes in CM 1:6 including dismantling of old existing tiles, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as a sub base finished even and smooth, complete all as specified and directed

Taking down chowkat with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm each and refixing in the same opening, complete all as specified and as directed at site.

Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each and removing from site (wood or steel), complete all as specified and as directed at site.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 Sqm each complete, all as specified and as directed at site.

All as per item No. 14 here-in-before but n.exc. 1.00 sqm.

Pressed steel door frame of size 125 mm x 60 mm with one or more rebates using 1.25 mm thick sheet including necessary fixing lugs, lock strike plate including one shop coat of zinc chromate primer, complete all as specified and directed.

All as per item No. 16 here-in-before but 105x60 mm.

S & F 35 mm thick second class hard wood, factory made, plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Prepration of previously painted wooden surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Box type steel window side hung double shutters with provision for desert coller/AC (Inside for wire mesh & outside for glass), including guard bar hinges, steel handle, tower bolt and steel peg stay complete with glazaing bar dovetailed for welded and fixed steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 including taking down of existing steel windows, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separately.

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separteley.

M&L for preparing of newly painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F in repairs 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane including hacking out old glass panes, complete all as specified and directed.

M & L for 4 mm thick figured glass, pin head type and glazing with oil putty in square n.exc. 0.5 sqm each pane, complete all as specified and directed.

S & F anodized aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

S&F anodised aluminium door shuter aluminium section weight 0.55 Kg/m including necessary joining cleats, glazing clips ruber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading secrews etc complete all as specified and directed

S & F in repairs aluminium anodised window and ventilator shutters side hung type without sash bar, aluminium sections weigthing 0.55 kg/m including necessary jointing cleats, glazing clips rubber packing, aluminium snap beading screwes anodized aluminium fittings such as peg stay 150 mm long(1 No) hinges type B-21 100 mm long 2 Nos suitbale handle 1 Nos, complete all as specified and directed.

S & F 5.5 mm thick sheet glass ordinary qulaity and galzing with aluminium snap beading in square and fixed to aluminium sections, complete all as specified and directed.

S & F 5.5 mm thick sheet glass ordinary qulaity and galzing with aluminium snap beading in square and fixed to aluminium sections including taking down old , complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed..

S & F 300 mm long aluminium sliding door bolts clamps type (ISI marked) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plates and two on staple plate, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 75 mm long butt hinges, medium weight, cold rolled mild steel fixed with screws or welding, complete all as specified and directed.

All as per item No. 36 here-in-before but 100 mm long.

S & F in repair 150 mm aluminium handles cast type anodized, complete all as specified and directed.

S & F mild steel 150 mm long helical door springs including roller and roller plate complete and necessary welding required, complete all as specified and directed.

18/19 mm thick prelaminated particle board interior grade as in cupboard shutters, partition wall and shelves fixed with frame, complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm ,made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof covering and removing from site of work, complete all as specified and directed.

Supply and fix 0.50mm thick Hi-rib trapezoidal pre-painted galvalume sheet (1060mm) of 550 MPA strength with 30mm crest height and 200mm pitch distance with guard film, side lap and end lap and fixing with self tapping screws/ "L" or "J" type cranked hook bolts and washers as per manufacturers instruction, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L of machine cut kota Stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (each stone not less than 55 cms x 55 cms) over 15 mm thick screed bed in CM (1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 kg/Sqm of surface including dismantaling existing surface, complete all as specified and directed.

M & L 25 mm dia aluminium anodized deproy rod poweder coated teat wood textured finished and wall thickness 1 mm complete designed and appterned as approved by Engineer-in-Charge.

Demolition of concrete (unreinforced) of any description and in any position not otherewise specifically provided for, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F for 15 mm GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor, complete all as specified and directed.

S&F for 20 mm GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor, complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing exc. 10 cm but n.exc. 20 cm girth complete all as specified and directed.

S & F in repair for 15 mm stop valve/angular stop cock fancy tpe chromium plated alloy, screwed down, high pressure, with crutch or bitterfly handle, screwed both ends for iron pipes or union, complete all as specified and directed.

S & F in repair for PVC connections pipe 15 mm size, with PTMT nuts of length 600 mm, complete all as specified and directed.

S & F in repairs for 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swevel joint any size including fixing to steel pipe or union complete all as specified and directed.

S&F for 32 mm dia PVC waste pipe for wash basin, complete all as specified and directed.

S & F in repair for 15 mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Preparing of old decorated surfaces of wall(Plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke , soot moulds and efflorescent salt and trading oil or greasy spots appliying one coat of white wash to obtain uniform surfaces including scaffolding arrangement, trestles, ladders etc all as specified and directed.

All as per ser item No. 61 here in above but applying one coat of white wash on ceiling

Preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features and applying one coat of oil emulsion distemper white or tinted includiing scaffolding arrangement, trestles, ladders etc all as specified and directed.

All as per ser item No. 64 here in above but aplyihng two coat of oil emulsion distemper

M & L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper white or tinted over and including a coat of primer complete all as specified and directed.

M&L preparing of old decorated surfaces of (Plastered or unplastered) wall and applying one coat of cement base paint includiing scaffolding arrangement, trestles, ladders etc all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint on wooden surfaces all as specified and directed by Engr-in-Charge.

All as per ser item No. 69 here in above but applying two coat of synthetic enamel paint on wooden surfaces

All as per ser item No. 69 here in above but applying one coat of synthetic enamel paint on steel surfaces

M & L for rendering 12 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10 mm thick rendering as on ceiling surface in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified.

M&L for writing building numbers with white paint on balck painted base in each block (both side of building) as per existing size complete all as specified and directed by Engr in Charge

M&L for preparing of old decorated surfaces of walls and applying one coat of weather coat paint including scaffolding arrangement , trestles, ladders etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks in 1:4 cement mortar on straight or curved on plan exc 6 m , complete all as specified and directed.

M&L for walling of random rubble uncoursed webonded,bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

All as per ser item No. 77 here in above but except stone

M&L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in cement mortar 1:4 compelte, all as specified and as directed.

Preparing old plastered surfaces of walls and applying two coats of cement base paint on wall complete all as specified.

Mild Steel TMT bars 5mm to 10 mm dia cut to length, bent to shape required including cranking, bending spirally for stirrups, spaces and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Mild Steel TMT bars 10 mm dia cut to length, bent to shape required including cranking, bending spirally for hop0ing for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as foundation and footing of column, complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) for column and bands, complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footing base of column complete all as specified.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and beams complete all as specified.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping and fixing of swan angles etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, all as specified

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for like MH cover, drain pipe bed, hard standing etc complete all as specified.

M&L for hard core of broken stone or boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), complete all as specified and as directed.

M&L for 50mm thick sand filling under interlocking paver block, including watering and consolidation, complete all as specified and directed.

M&L machine pressed pre cast concrete interlocking paver block (with grey cement and no pigment) any shape and size with M-40 conforming to IS 15658-2006 of 80 mm thickness complete all as specified.

M&L machine pressed pre cast concrete interlocking paver block (with grey cement and no pigment) any shape and size with M-35 conforming to IS 15658-2006 of 60 mm thickness complete all as specified.

Dismantling stone slab and tiles of any description or thickness in floor or apron laid beddded and pointed in any morter complete all as specified and directed

M&L for 20 to 22mm thick cement concrete chequered tiles, glossy finish, coloured, of any size and pattern as approved by GE as in patches in floor with set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for Paver blocks (concrete tiles gloss) finished coloured 25mm thick cement concrete chequered tiles, glossy finish, coloured, of any size and pattern as approved by GE as in patches in floor with set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provison of galvanised mild steel wire, staples or steel pins (each line of wire to be measured), complete all as specified and directed.

All as per ser item No. 98 here in above but except galvanised 2 strand steel wire

Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

S&F in repair concertina coil galavanised 600mm dia including securing or tying at crossing with & provision of galvanised Mild steel wire staples or steel pins etc as directed (each line wire of wire to be measured) all as specified

Fixing only mild steel work as in posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , flat iron fillets (for securing wire mesh etc)., including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-290 Gde E-165 complete, all as specified .

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any kind/type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50 m from the starting point., all as specified .

M&L for 15 mm thick plaster in cement mortar 1:4 n.exc 1.00 sqm each patch on brick walls finished even and smooth without using extra cement including taking down old cement plaster on brick wall concrete surface, raking out joints, hacking for key, scrubbing down with water etc and finnished the surface matching or existing colour finish complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 79140.00 during AOC Note:- Tenderers shall not quote for this Schedule

ASHWANI KUMAR KHAJURIA AND SONS

M/S MANISHA BUILDERS

BHARTI CONSTRUCTIONS

ASHFAQ AHMED MANHAS