WELCOME MANIT REPAIR TO ROOFS BRICK WORKS EXTERNAL INTERNAL PLASTERING JOINERY FLOORING TILLING SANITARY FITTINGS CERTAIN BR WORKS AND EM WORKS ETC AT AF STN DHANSA UNDER AGE BR AF RAJOKRI AND AGE EM AF RAJOKRI OF GE AF GURGAON

Amount

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper complete all as specified and as directed.

All as per item No-2 above but on surfaces of ceiling.

M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old surfaces or unplastered of external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessaof ry filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats of exterior emulsion paint complete all as specified and as directed.

M&L for preparation of old surfaces or unplastered surfaces of wall and applying one coat of exterior emulsion paint complete all as spd and directed by Engr-in-charge

Taking down plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:4 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls, fascias, chajjas, parapets etc. and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing from site complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm and removing from site complete all as specified and as directed.

S&F window or ventilators section of frame 72x55 mm fixed to wall or concrete surface with rowl plugs nmade, of galvanised steel powder coated and section of shutter 47x20 mm , mullion section 72x50 mm (Base steel as per IS 513 :"D" quality galvanised as per IS 277 wiyh zinc of 120 gms ) glazed or gauged and wire gauged shutter prepare to receive wire mesh to the shutter( double door shutter) with total coated thickness of 0.6mm including grills/guards bars made of square bars powder coated fixed to windows frame with screws including necessary fittings and all builders hardware such as handies, tower bolts & stays etc complete all as specified and as directed . type -4000series . Note: glass and wire mess shall be measured and paid separtely under respective items.

S&F 4mm thick plain/ frosted glass pane fixed in window shutter/ventilators including necessary beading/wooden beading andoil putty complete all as specified.

S&F factory made 35mm thick 2nd class hardwood plain framed, panneled shutters with lock rail and pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS-1003 (Part-1) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 35mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F in repairs for 12mm thick toughened frosted glass door with 02 Nos of door handle (model No. SMDH-WSS-55 size 50x302x500), top and bottom pivot with heavy duty floor spring including fixing of 3mm thick Stainless steel bracket with L-connector/Glass to glass 180 degree / glass to glass 90 degree/U-connector (partly fixed and openable) including fixing of Double Door Lock and other necessary fitings complete all as specified. Door glass to be fixed on wall/floor/RCC member will be fixed as directed by Engr-in-Charge at site. All builder hardware will be of stainless steel The glass so fixed should be air tight and no air gap should be left at any position.

S&F in repair powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for door shutters, windows ventilators with one or more reir bates with and including joining cleats for fixing etc complete all as specified and directed.

S&F in repairs powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutter fixed / openable type with sash bar aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber packing, anodised aluminium snap beading, hinges type B-21 100mm long (2 No) suitable handle (2 no.) peg stays 150mm long, screws etc complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.

S&F in repair powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutter , aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber neoprene packing, handles 2Nos in each door, hinges, anodised powder coated aluminium snap beading screws etc. complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.

S&F fabricated anodized aluminum grill of size 75x75mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and directed by Engr-in-Charge

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying a coat of wooden filler liquid transparent and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified.

M&L hacking out old broken glass, any thickness from wooden frame/ ms frame of window/ventilators , provide 3mm thick sheet glass plain/figured , pin headed with oil putty glazing pin and wooden beading

S&F in repair MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F in repair mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening including holdfast and fixing complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125mm size aluminium handle cast type anodised complete all as specified and as directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed

S&F stainless Steel Butt hinges of 100 mm size, complete all as specified and directed.

All same as per item No 40 here-in-before but 75mm size.

S&F double legged door stopper of aluminium alloy with rubber complete all as specifified and as directed.

S&F mild steel ordinary rat tail rod pattern springs including rollers and roller plate complete all as specified and as directed

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and as directed.

Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed.

S&F in repair 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 9mm thick plywood grade BWR type BB fixed with screws to timber framed complete all as specified and as directed.

S&F 18 to 19mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.

S&F 50mm dia cup board/ kitchen cabinet knob of wood finish fixed with nut, screw and washer complete all as specified and as directed.

S&F magnetic catcher 50mm long complete with plate fixed with screws complete all as specified and as directed.

S&F venition blind for window including necessary items required for fix to wall complete all as specified

S&F Toilet paper holder of brass of chromium plated or stainless steel fixed to wall with s/s screws.

S&F Acrylic shelf 46X13cm make ESS ESS model (TM 07) chrome or equivalent complete all as specified.

S&F in repair corner shelf with CP railing 300mm x 300mm complete all as specified

S&F in repair CP jet for EWC along with pvc connection complete all as specified.

S&F CP brass Health faucet with 15mm bore pipe all as specified.

S&F for CP brass liquid soap container fixed with and incl CP brass screws.

S&F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and as directed

S&F in repair 15 mm bore bib tap copper alloy chromium plated, fancy type, long shunk screwed down for iron pipes or for brass ferrule complete complete all as specified and as directed

S&F as in repair 15 mm bore pillar taps cast copper alloy capaston head chromium plated, fancy type screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed as in repair complete all as specified and as directed

S&F in repair 15 mm bore stop valve/angle valve cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed

S&F in repair 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed

S& F 15mm size PVC connection pipe with PTMT nuts length 600/450mm.

S&F in repair 20mm PVC ball valves high pressure with epoxy coated aluminum rod & high density plastic ball screwed for iron or for union complete all as specified

S&F in repair 15mm PVC ball valves high pressure with epoxy coated aluminum rod & high density plastic ball screwed for iron or for union complete all as specified

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore and fixed as in repair complete all as specified and as directed

All as per above item No 66 above but 20 mm bore

S&F as in repair shower rose of 100mm circular type cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed

S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwd sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed

All as pe item No 69 above but 40 mm dia for sinks

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed

S&F in repair PVC flushing cistern low level of 10 Ltr capacity valveless, symphonic action type (white colour) with inlet, balll valve, float end handle including flush pipe of 32 mm bore MS chromium plated and connection to pipe etc complete all as specified and as directed.

S&F in repair PVC flush bend 32 mm bore with two Nos check nuts for connecting to low level flushing cistern top European type water closet or Indian type water closet including cement joint complete all as specified and as directed

S&F in repair 125mm/150mm dia chromium plated grating fixed on floor trap/Nahni trap with CM 1:6 complete all as specified and as directed

S&F 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap as in repair complete all as specified and as directed

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F as in repair vitreous china wash down water closet pan (Pedestal Pattern) EWC white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed

S&F as in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F in repair vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or liboratory with plugs washers and waste incl bedding in cement mortar to dwarf walls or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410x330x160mm complete all as specified and as directed

Taking down 15 mm bore mild steel tubing and connections incl cleaning for refixing or removal from site complete all as specified and as directed

All as per item No 81 above but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling , concealed in walls or laid in floors complete all as specified and as directed

All as per item No 83 above but for 20 mm bore

Disconnecting to existing PVC tanks , setting aside ( for lowering down if required ) for repairs , if hoisting if required reconnecting and refixing in position cap upto 1000 ltr including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and as directed

S&F as in repair rotational moulded polythene water storage tank of capacity 500 Ltr 3 layer (cylindrical vertical with closed top cover), hoisted and fixed in position all specified in SSR part –I ( 1991) complete all as specified and as directed by Engineer-in-Charge Note : The cost of accessories like inlet and out let pipe ball valve to air vent pipe shall be measured and paid separately under concerned item No thing extra admissible on this account

All as per item no 86above but 1000 ltrs

S&F in repair brass face heavy duty for pillar cock, CP stop cock CP Bib cock and concealed stop cock complete all as specified and directed

Cutting holes in brick walls/concrete surface to clear the junction of CI pipes & fitting coming at outer face of the out side wall or any other situation ands making good the dismantled portion in cement mortar 1:4 or cement 1:2:4 type BI to match the existing surface.

Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete. all as specified & as directed by Engineer-in-Charge. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and as directed

S&F of floor door spring etc complete all as specified and as directed

S&F of door closer hydraulically regulated design No 2etc complete all as specified and as directed

S&F of Mortice lock vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and as directed

S&F of Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and as directed

S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and as directed

S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and as directed

S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and as directed

S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and as directed

S&F in repair 2nd class hard wood beading straight (any size) for glazed/gauged joinery, renewed incl mitered etc complete all as specified and directed

M&L for repairs to sliding door bolt, hinges, pintel, locking arrangment, spike, roller, roller rails etc of steel gate/Wicket gate including welding /reveting to bring the steel gate /wicket gate in service condtions etc complete all as specified and directed

M&L for repairs to rolling shutter including necessary gressing, welding, locking arrangement including serviceing to gear box etc complete as to bring in service condtions etc all as specified and directed

M&L for repairs to collapsible steel gate including necessary gressing, welding, locking arrangement including serviceing etc complete as to bring in service condtions all as specified and directed

Dismanting of rolling shutter

S&F 1.25mm thick Steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified.

S&F Safety lever locks mild steel with 4 levers incl ball bearing for rolling shutters complete all as sspecified and directed.

S&F in repair curtain rods with mild steel conduit pipe 25 mm bore with covering of PVC sheet with fancy eves with wall thickness 1 mm thick incl MS chromium palted brackets holders or screwed to pelmet boxes or to fixed in walls incl domes and side walls complete all as specified and directed

S&F in repair MS chromium plated tubular towel rail 20 mm dia ‘D’ type 60 Cm long between flanges to wall with chromium plated brass screw, washers and nylon sleeves complete all as specified and directed

Dismantiling of Plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings complete all as specified

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550Mpa as in roof covering cladding to wall fixed with self tapping screws as specified

Dismantling mild steel work of any description not otherwise provided for

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410 - S

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or any insulations boards/slabs/blankets, any thickness, including cover fillets.

M&L for clip metallic powder coated 0.5mm thick false ceiling with GI frame work made up of standard Tee, angle or any other section as in grid type ceiling frame work as approved by GE. Ceiling shall be hanged to roof trusses/purlin rafters with the help of GI wire not less than 4mm dia at an interval not exc 1 mtr the size of metallic powder coated ceiling tiles 600mmx600mm as approved by GE and as directed.

Supply and fixing in repair snap grid ceiling with 4mm thick E-board of approved size 60 CM x 60 CM supproted on and including aluminium alloy anodised angle 25 x 25 x 1.5 mm at edge and tee section 25 x 38 x 1.5mm at edges and edges placed both ways at a spacing 60 CM center to center including necessary aluminium alloy anodised cleats and 3mm dia GI wire suspenders fixed to ceiling not exceeding 120cm center to center both ways including two equivalent in Bhutan Board/ India Gypsum/Kitply/Duratuff/Anchor.

Dismantling of floor , hearth , or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for ceramic coloured / non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:6) and pointed complete all as specified and directed

M&L for Vitrified ceramic coloured tiles 9 to 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed

Ditto all as per item No 120 above but on vertical surface such as skirting / dado etc

Ditto all as per item No 120 above but on vertical surface such as skirting / dado etc

M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles including 10 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge

Demolition of stone slabs and tiles in any position all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Dismantling of wall cladding tiles complete all as specified and directed

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floors.

M&L for designer coloured wall cladding tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

M&L for 15mm thick in CM 1:4 as backing coat coat of wall cladding etc complete all as specified and as directed

M&L 75 mm thick PCC type D-2 (1:2:4) using 40mm stone graded aggregate as in floor sub base.

M&L for cement concrete 1:4:8 type D-2 (using 40mm gde agg) as in foundation or sub base and mass concrete etc complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.

Demolition of plain cement concrete in any floors and paving not exc 15 cm thick above or below ground level including tiles if any.

Dismantling of PVC wall paneling.

S&F for colour wood grain printed PVC sheets 5mm thick as in wall paneling inclusive of solvent cement incl necessary PVC frame work for fixing on brick or concrete wall with all as specified and as directed , Make :- Rajshree/Sintex

M & L appliying cement paste mixed with RBR compound (Roof Bond Repair) Mixed in ratio as per instruction to Stop the seepage applied in side of Nahani trap floor traps W C traps junction of CI pipes bends & similar items junctions to eliminate the seepage

S & F as in repair of PVC Symphonic action system for to PVC low level cistern including float valve , handle & Connection rod etc complete all as specified and as directed

S & F in repair plate rack of stainless steel sheet 1mm Thick for kitchen overall size 750 X 900x250 mm fixed with plugs and washers on wall complete all as specified

Taking down carefully old copper/alluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fitting etc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as directed

Taking down old unserviceable main switch, DB's/RCBOs/MCCB/Sheet Metal Enclosures including MCBs & wooden/GI/MS sheet board etc and removing materials from the site of work complete all as directed

Taking down old unserviceable sub main wiring any size/core/type of copper/alluminium conductor. including making good the disturbed surfaces and removing materials from the site of work complete all as directed .

Taking down carefully Single phase Electronic metre and removing materials to store for keeping in safe custody for reuse or for taking credit and making good disturbed surface of walls, floors etc.

M&L for point wiring complete with stranded copper conductor 1.5 Sq. mm size (Nominal area) PVC insulated unsheathed cable 650 volts grade conforming to IS drawn in and including medium duty concealed in PVC conduit conforming to IS and ISI marked not less than 19 mm dia with concealed including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for :-

(a) One light point/bell point/one fan/exhanust fan controlled by one,one way switch.

(b) For one 5 pin, socket outlet 5/6 amp on independent board with other switches

(c) For one 3 pin socket outlet 5/6 amp on same board

M&L for point wiring complete with stranded copper conductor 4 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia with 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module including single core stranded copper conductor 2.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for one 6 pin socket outlet two in one 16/6 amps on an independent board.

M&L for switch piano, flush type single pole one way 5 amps complete all as directed by Engr - in - charge.

Refixing of switch piano, flush type single pole one way 5 Amp complete all as specified(Note :- Old serviceable material shall be obtained from Ser item No 142 here in before for reuse.)

S&F Bell push flush type 5 Amp complete all as directed by Engr - in - charge.

M&L switch socket combination 2 in 1, 5 Amp Flush Type 5 pin multipurpose suitable for independent board complete all as specified by Engr-in-Charge

Refixing of socket combination 5 pin multipurpose 5 A(Independent) flush type complete all as specified by Engr-in-Charge (Note :- Old serviceable material shall be obtained from Ser item No 142 here in before for reuse.)

M&L socket outlet 2 in 1,3/5 pin 5 Amp Flush Type multipurpose suitable for same board complete all as specified by Engr-in-Charge

Refixing of socket outlet 5 pin multipurpose 5 A(same board) flush type complete all as specified by Engr-in-Charge (Note :- Old serviceable material shall be obtained from Ser item No 142 here in before for reuse.)

M&L switch socket combination 2 in 1, 5 pin multipurpose 16 A , flush type.

Refixing of switch socket combination 2 in 1 5 pin multipurpose 16 A flush type complete all as specified by Engr-in-Charge (Note :- Old serviceable material shall be obtained from Ser item No 142 here in before for reuse.)

Supply & fix submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 4.0 sqmm 1x 2.5 sqmm wire Make of wire: Havells/Plaza/Finolex. Make of PVC casing capping: Plaza/Horse/Pesto plus

M&L PVC/Wooden blocks as suitable to site condition for fixing tube light fitting on wall/ceiling complete all as directed by Engr-in-Charge.

S&F in replacement of tube light fitting 1X20 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS20WLED865SPCSSor equuivalent make of phillips,Surya,Bajaj.

S&F in replacement of tube light fitting 1X10 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS10WLED865SPCSSor equuivalent make of phillips,Surya,Bajaj.

S&F sheet metal enclosures for DB-4 way, SPN, 200 Amps Bus bar 240 Volts single door

S&F sheet metal enclosures for DB-08 way, SPN, 200 Amps Bus bar 240 Volts Single door

S&F sheet metal enclosures for DB-12 way, SPN, 200 Amps Bus bar 240 Volts Single door

M&L MCB SP 240 volt, 5 to 32 Amps, B series, 10 KA Make : Havell's / Plaza / Legrand

M&L MCB SPN 240 volt, 5 to 32 Amps, B series, 10 KA .Make : Havell's / Plaza / Legrand

Re fixing of MCB SP /SPN of any type and capacity all as directed by Engr-in-Charge

S&F electronic type fan regulator . Make : Anchor/Surya/Havells

Re-fixing electronic type fan regulator complete all as specified and directed by Eng-in-Charge

M&L ceiling rose , single phase /PVC /Polycarboante isolated body.

Re fixing of Ceiling rose all as directed by Engr-in-Charge

S&F Bell Multi Music type Make : Anchor/Surya/Havells

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less thatn 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers GI earth wire with protected by 15mm dia light grade GI pipe and other end connected to earth testing point or main controlling switch as directed incl funnel with watering pipe 20mm bore light grade GI pipe, wire mess , charcol and common salt, concrete earth pit in PCC (1:3:6) type C1 cast iron frame cover , including necessary excavation, earth work in soft/loose soil and disposal of soil to a distance not exc 50mtr and necessary testing complete all as shown in electrical plate No 3 of MES schedule Part I and testing all as directed.

Fixing only and connecting Electric meter upto 25 Amps

S&F Higly efficient LED Bullbs of 15 W

S& F in replacement of decorative wall light fitting made up of high grade engineering plastic material suitable for LED Lamp15/20 w all as directed make Haveiis cat part no LHFDGBE1TZ1W035 OR EQUIVALENT MAKE of phillips /CG/wipro

KISHAN SINGH AND CO

M/S RK Builders