SPECIAL REPAIR TO BLDG NO 68 OTM ACCN OF 3 TTR AT BAMBOLIM CAMP UNDER GE PANAJI GOA

Amount

Dismantling asbestos cement (corrugated/semi corrugated etc) sheet in roof covering complete all as specified and as directed.

Dismantling of timber scantling 40 sq.cm and over in section in any position complete all as specified and directed.

Supply & Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Ditto all as item 3 above but plain steel sheet 0.50 mm thick.

Supply & Fix steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E-250 quality 'A') complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:6 on brick or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for applying two coat of oil emulsion distemper including prepration of new surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed.

Material & Labour for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed.

Taking down cement plaster of any description from brick or stone walls including racking ouit joint hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:4 on brick or concrete surfaces of wall , finished even and smooth without usng extra cement complete all as specified and directed.

Material & Labour for preparation of new plastere surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over two coats of damp proof white over 3mm thick wall care putty on new surface complete all as specified and directed.

Taking down chowkat/ frame with shutters n exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

All as in item No. 15 above but exc 1.5 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply & Fix 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Supply & Fix 35 mm thick 2nd class H/W Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply & Fix glazed, guaged skeleton shutter 35mm thick 2nd class H/W factory made divided in to squares with plain, chamfered of rounded, mitred and reveated sash bars any number prepared to receive glass/gaused etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/guaged etc complete all as specified and directed.

Material & Labour Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and as directed.

Supply & Fix for Power coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply & Fix Powder coated anodised aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply & Fix 4 mm thick plain sheet glass ordinary quality and glazing fix with bead in squares n. exc. 0.5 SM in each pane complete all as specified and as directed.

Supply & Fix Aluminium alloy wire cloth fixed 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads in doors and windows complete all as specified and directed.

Supply & Fix Butt hinges, medium weight cold rolled mild steel and fixed 100mm long complete all as specified and as directed.

Supply & Fix aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and as directed.

Supply & Fix aluminium handles cast type anodised 150mm long complete all as specified and as directed.

Supply & Fix Aluminium alloy powder coated sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply & Fix 300mm ordinary rat rail rod pattern spring including roller plate complete fixing maild steel spring complete all as specified and directed.

Material & Labour for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick b ut not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Supply & Fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, handmade sliding bolts, clamps, hold fasts, wall tiles, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe310-0 complete all as specified and directed.

Supply & Fix aluminium grills DG-104 of Deco Grill/ Handal 10mm thick diamond shape with aperture 7.5 cm for windows complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material & Labour 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, finishing the surface even and fair as in plinth protection and similar work complete all as specified and directed.

Material & Labour 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, finishing the surface even and fair as in sub base and similar work complete all as specified and directed.

Material & Labour cement concrete type B1, 1:2:4 using 20mm graded stone aggregate25mm thick as in flooring etc complete all as specified and as directed.

Dismantling of old ceiling boarding of any description including cover filters complete all as specified and as directed.

Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all alonge the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 6mm thick designer non-asbestos fibre cement building boards (surface finished with one coat of Apex) fixed or laid/ inserted to aluminium frame work with screws complete all as specified directed.

Material & Labour for machine cut Kota stone slab flooring 20-22mm thick over 20mm cement screed in cement mortar 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and fix 2nd class hard wood scantling clean sawn as in rafters, truss members etc complete all as specified directed.

Material and labour for providing and laying 60mm thick (glosy finish) factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive way or light traffic, parking etc of required strength, thickness & size/ shape , made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material & Labour for PCC type B-1, 1:2:4 (20mm graded stone aggregates) as in coping and the like complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring of light, fan socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good distrubed surfaces of wall/ ceiling etc so as to match with the existing wall/ ceiling/ floors etc complete all as specified and as directed.

Taking down carefully sub main wiring including copper/aluminium/GI earth continuity conductor includes PVC conduit and making good disturbed surfaces all as directed of any sizes complete all as specified and as directed.

Taking down unserviceable MCB DBs with MCBs of any size and capacity alongwith teakwood boards, incl all fittings/furniture carefully and making good disturbed surfaces of wall complete all as specified and directed.

Material and labour for point wiring for one Light/ Fan/ controlled by one way switch complete with 1100Volts grade 1.50 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including white/ ivory colour heavy grade PVC casing -n capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including PVC boxes for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable as earth continuity wire and connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces with distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed.

All as per ser item No 46 above but for one 5A socket point controlled by one switch on same board.

All as per ser item No 46 above but for one 5Amp independent socket point controlled by one switch.

All as per item No 46 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

Material & Labour for switch Piano flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified (Make : Anchor (Delux)/ Leader/ Bajaj)

Supply & Fix switch socket combination 2 in 1, 3 pin, 5/15 A, single pole one way flush type universal, 240 V white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj).

Supply & Fix switch socket combination 5A, single pole one way flush type universal, 240 V white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj).

Supply & Fix electronic socket size, rotary, 5 speed step type regulator, 220-230 volt white finish complete all as specified Make: Crompton greaves/ Bajaj/ Anchor

Supply and Fix LED Batten Tube Light light fittings 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make :-Bajaj Cat part No BCLSB 20 WH or equivalent in CG,Havells

Supply and Fix LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make:-Bajaj Cat part No BCLSB 10 WH or equivalent in CG, Havells

Supply and Fix Ceiling fan BEE labelling 5 Star Rated Voltage single Phase, 220Volts AC. Frequency 50HZ Maximum Power Input 50 Watt sweep 1400 mm minimum air delivery 245 CFM with service value 6.00 BEE 5 star rated with standard fittings & accessories, Capacitor, double ball bearing, down Rod, canopy & other standard accessories for fitting of the fan complete all as specified and as directed. Note:- Certificate received from BEE mention input power, 5 star rating, air delivery and 2 year guarantee certificate will be submitted by the contractor. Make:- Bajaj/ Havells/ Crompton

Supply & Fix ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and directed. Make: Anchor (Delux)/ Leader/ Bajaj

Supply & Fix lamp holder PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. Make: Anchor/ Leader/ Bajaj

Supply and Fix IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. Make:- Havells/ Schneider/ L&T

Supply and Fixing Isolator SPN 6 to 40 Amps, 240 Volts complete all as specified and as directed. Make:- Havells/C&S/ Schnieder.

Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 10 KA capacity having C-series connected with suitable lugs and suitable for lightening load of capacity 6 to 32 Amps complete all as specified and as directed. Make:- Havells/Schnieder/ L&T.

Material & Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 4 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab )drawn through and including heavy grade PVC casing caping (Make: Prestoplast/ Pressfit/ Finolex/ Precision) of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 2.5 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 4 Sqmm single core copper cables and One run of earth conductor cable of 2.5Sqmm with and including casing capping/conduit will be measured and paid as one unit length.

Material & Labour for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I all as specified and directed by Engr-in-Charge. Note:- (i) On testing if desired earth resistance is not obtained, the earthing will be redone as no extra cost.

Supply, laying, connect and testing of cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core including taking down old unserviceable service wire/cable of any size all as specified and directed.

Supply and fix 25W LED street light fitting, 230 volt energy efficient IP protection 65 complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make:- CROMPTION Cat Part No LSTS-25-CDL-M or equivalent in Havells/ Bajaj

Excavation in trenches not exceeding 1.5metre wide and not exceeding 1.5metre in depth and getting out in soft/ loose soil for laying of cables, pipe etc. complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and as directed.

Removing surplus excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and laying HDPE Double wall corrugated (DWC) pipe heavy duty of outer dia 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable protection including bends complete all as specified and directed. Make: Rex Polyextrusion Ltd, Finolex, Supreme, Prince, Astral.

Supply and fix DWC HDPE coupler of dia of 50mm complete all as specified and directed. Make:- Rex Polyextrusion Ltd or equivalent as approved by GE in writing.

Supply and Laying 40mm bore galvanised iron steel water tubing of light grade with and including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site, laid in trenches/ fixed on wall/ pole for protection of cable complete all as specified and directed. Make :- Tata/ Swastik/ Jindal/ Prakash

SHREE THATWAMASSY CONSTRUCTIONS PRIVATE LIMITED

industrial suppliers

Mukta Enterprises

SLB Enterprises

OM INFRA