Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.3 LAccepted-AOC AT PO SHERPUR DANAPUR CANTT PATNA 801 503 | PATNA | PATNA | BIHAR | 801503 | ₹49.3 L Quoted ₹50.9 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹52.0 LRejected-Finance | ₹52.0 L | L2 | Rejected-Finance OTHER THAN LOWEST |
| 3 | L3₹52.2 LRejected-Finance B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | ₹52.2 L | L3 | Rejected-Finance OTHER THAN LOWEST |
| 4 | L4₹52.6 LRejected-Finance SADAR BAZAR DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | ₹52.6 L | L4 | Rejected-Finance OTHER THAN LOWEST |
| 5 | L5₹53.0 LRejected-Finance | ₹53.0 L | L5 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | PAPPU ROY CONSTRUCTION L3 | M/S NANDA CONSTRUCTION L2 | M/s KUMAR ENTERPRISES L6 | M/S MODERN CONSTRUCTION L7 | RC GUPTA AND SONS L4 | CP RAJ L1 | M/S SHEO KUMAR SINGH AND SONS L5 | M/S JAI AMBAY CONSTRUCTION L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. | 21.9 | Cum | 900 ₹19,710 | 869 ₹19,031.10 | 750 ₹16,425 | 880 ₹19,272 | 888 ₹19,447.20 | 800 ₹17,520 | 879 ₹19,250.10 | 920 ₹20,148 |
| 2.00 | Demolition of reinforcement cement concrete above the ground floors n.exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc | 2 | Cum | 1,475 ₹2,950 | 1,463 ₹2,926 | 1,200 ₹2,400 | 1,585 ₹3,170 | 1,503 ₹3,006 | 1,250 ₹2,500 | 1,472 ₹2,944 | 1,575 ₹3,150 |
| 3.00 | M&L 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mm graded stone stone aggregate as in floors including finishing the surface rough for laying kota stone /tiles complete all as specified and directed. | 250 | Sqm | 195 ₹48,750 | 191 ₹47,750 | 165 ₹41,250 | 195 ₹48,750 | 188 ₹47,000 | 195 ₹48,750 | 199 ₹49,750 | 186 ₹46,500 |
| 4.00 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. | 30 | Cum | 725 ₹21,750 | 721 ₹21,630 | 695 ₹20,850 | 680 ₹20,400 | 744 ₹22,320 | 650 ₹19,500 | 731 ₹21,930 | 695 ₹20,850 |
| 5.00 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified. | 29.64 | Cum | 7,400 ₹2.2 L | 7,345 ₹2.2 L | 7,145 ₹2.1 L | 7,460 ₹2.2 L | 7,231 ₹2.1 L | 6,800 ₹2.0 L | 7,355 ₹2.2 L | 7,500 ₹2.2 L |
| 6.00 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall. | 3.15 | Sqm | 895 ₹2,819.25 | 903 ₹2,844.45 | 981 ₹3,090.15 | 945 ₹2,976.75 | 914 ₹2,879.10 | 900 ₹2,835 | 913 ₹2,875.95 | 945 ₹2,976.75 |
| 7.00 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in fdn, sub base, mass concrete & cinder concrete etc. complete all as specified and directed. | 15 | Cum | 5,775 ₹86,625 | 5,788 ₹86,820 | 5,540 ₹83,100 | 5,820 ₹87,300 | 5,681 ₹85,215 | 5,500 ₹82,500 | 5,793 ₹86,895 | 5,820 ₹87,300 |
| 8.00 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed. | 63 | Sqm | 329 ₹20,727 | 333 ₹20,979 | 332 ₹20,916 | 325 ₹20,475 | 333 ₹20,979 | 320 ₹20,160 | 343 ₹21,609 | 325 ₹20,475 |
| 9.00 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and directed. | 3.3 | Cum | 6,650 ₹21,945 | 6,633 ₹21,888.90 | 6,550 ₹21,615 | 6,600 ₹21,780 | 6,775 ₹22,357.50 | 6,500 ₹21,450 | 6,643 ₹21,921.90 | 6,480 ₹21,384 |
| 10.00 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. | 1,250 | Sqm | 55 ₹68,750 | 58 ₹72,500 | 65 ₹81,250 | 55 ₹68,750 | 58 ₹72,500 | 50 ₹62,500 | 66 ₹82,500 | 60 ₹75,000 |
Updated dates
Tender Value
₹47.7 L
EMD Value
₹95,320
Closing Date
27 Mar 2026, 6:00 pmClosed
GE DANAPUR CANTT
GE DANAPUR CANTT
SPL REPAIR TO BLDG NO P-44 FOR LPG STORE ROOM AT DANAPUR AND SPECIAL REPAIR TO ROOF SHEET FALSE CEILING AND COMPLETE PLASTERING DISTEMPERING JOINERY SANITARY FITTINGS, REPLACE OF BROKEN DOORS, WINDOWS, WHITE WASH INTERNAL AND EXTERNAL AND CHANGE
2026_MES_755531_1
CA NO GE/DNR/T-112
Open Tender
Civil Works
180 days
DANAPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE DANAPUR CANTT
₹95,320
Yes
20 Apr 2026
7 Mar 2026
3 Apr 2026
7 Mar 2026
27 Mar 2026
21 Mar 2026
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforcement cement concrete above the ground floors n.exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc
M&L 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mm graded stone stone aggregate as in floors including finishing the surface rough for laying kota stone /tiles complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall.
M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in fdn, sub base, mass concrete & cinder concrete etc. complete all as specified and directed.
M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and directed.
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.
Supply only water proofing compound (liquid), ISI marked.
Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
Same as item No 14 above but exc 1.5 Sqm but n.exc. 4 Sqm each.
Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each and removing to store.
S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both complete all as specified and directed.
S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed.
S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc, complete all as specified and directed.
M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar workd including necessary form work as required complete.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long.
S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.
S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified.
S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.
S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed.
S&F small fittings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long complete all as specified and directed.
S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia complete all as specified and directed.
Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F of CPVC 20 mm outer dia Brass elbow complete.
S&F of CPVC 20 mm outer dia Brass elbow (3/4x1/4) complete
S&F of CPVC 20 mm outer dia Brass Tee complete
S&F of CPVC 20 mm outer dia Male Brass Tthreaded adopter (3/4x1/2) (MTA/MBTA) complete.
S&F of CPVC 25 mm outer dia male brass threaded adopter (3/4x1/4) (MTA/MBTA) complete.
S&F of CPVC 20 mm outer dia female brass threaded adopter (3/4x1/4) (MTA/MBTA) complete
S&F of CPVC 25 mm outer dia female brass threaded adopter (3/4x1/4) (MTA/MBTA) complete
S&F of CPVC 20 mm outer dia Brass tank adopter complete.
S&F of CPVC 25 mm outer dia Brass tank adopter complete.
S&F of CPVC 20 mm outer dia Brass union complete
S&F of CPVC 25 mm outer dia Brass union complete
Cutting chases in brick walls, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, cills, sunshades , shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and mixing good, cutting not exc 10 cm girth complete.
S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer including 32 mm dia flush pipe complete all as specified and directed.
S& F in repairs vitreous china urinal bowl back or corner complete including providing fand fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistren with brackets flush pipe, grating and union for dishcharge pipe.
S & F in reparis vitreous china squattting plate urinal complete including providing and laying in floors, bedding urinal in cement mortar 1:2.
S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete.
S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.
S&F in repair bib tap 15 mm bore , chromium plated with cructch or butterfly handles screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore pillar taps cast copper alloy with capstain head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks & fly nuts screwed for iron pipe & fixed complete.
S&F in repair brass CP steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specified and directed.
S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type) high pressure with capstain head handle, screwed both ends for iron pipe or for unions of 15 mm dia.
S&F in repair angle cock 15 mm bore fancy type chromium plated with capstion head high presuure, screwed down screwed for iron pipe or for brass ferrue fixed to iron pipe.
S&F soap dish of any type size and shape fixed to plugs with chromium plated brass screw complete all as specified and directed.
S&F in reapir chromium plated overhaed shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed.
S&F PVC (SWR) 'P" trap for 110 mm dia complete all as specified and directed.
Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe.
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in floors/trenches complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors/trenches complete all as specified and directed.
S&F PVC (SWR) pipes 50 mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed.
S&F clamp made out of 50x5 mm flat iron, 16 mm dia round iron stays icluding bolts&nuts and securing ends of stays to wall or roof for 110 mm PVC complete all as specified and directed.
S & F PVC (SWR) bend of 110 mm dia of any radius etc complete all as specified and directed
S&F PVC (SWR) bends any radius provided with access door of 110 mm dia.
S&F PVC (SWR) Tee of 110 mm dia etc complete
S&F PVC (SWR) bends any radius provided with access door of 75 mm dia.
S&F PVC (SWR) branch piece, single (equal or un equal) , ordinary or inverted (spigot and socket type) or with parallel branches of 110 mm dia with access door.
Same as item No 70 above but 75 mm bore
S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.
S&F PVC (SWR) nahani/floor trap , plain with grating with or without waste hole including jointing with solvent 75 mm dia complete all as specified and directed.
S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete.
Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity complete all as specified and directed.
S&F in repair 20 mm bore gun-metal , globe or gate valves, with iron wheel head head , screwed both ends for iron pipe and and fixed complete all as specified and directed.
S&F in repairs Gun metal, globe or gate valve with iron wheel head, 25 mm bore, screwed both ends for iron pipe complete all as specified and directed.
M&L Preparing new steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for two coats of cement based paint over a coat of alkali-resistance primer on plastered surfaces complete all as specified and directed.
M&L preparaton of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of priming paint on wall complete all as specified and directed.
Dismantling AC/CGI (corrugated/semi corrugated etc), sheet as in roof covering complete.
S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square or any shape) including purlins, rafter, special shaped washer etc. complete using any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
S&F Mild steel plain black iron sheet 1.60mm covering to door shutters, covering to door chowkats (frames), water tanks, cut to side edges beaded if directed includig round headed screws, clouts nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded/riveted seams inlduing bending, turning up, mitred angles, stopped ends, outlets etc
S&F framed work Fe 410-W (Gde-E-250 quailty A) as in doors or gates of angle or other sections with guest plates, rails, braces etc, complete driled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering runing rails and guides and hanging also fastening and fixing complete all as specified.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and directed.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed.
M&L for providing reinforced cement concrete nominal mix 1:2:4 type B1, using 20mm graded stone aggregate as in Chajjas and like complete all as specified and directed.
M&L MS TMT steel bars 6 mm to 8 mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.
M&L formwork to flat rough finished surfaces of chajja, trough and similar items including edges all as specified and directed.
M&L for rubber sheet flooring 18 mm thick in layer of 6 mm thick of black or any colour except white colour as in floor fixed with glue/ adhesive complete all as specified and directed. Make of Rubber Sheet: Kantech Rubber Industries/ Fab flooring India/Polymax CIRCA premium rubber flooring or any equivalent as approved by GE
Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.
S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.
S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.
M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etccomplete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tile to store and rubbish off the premises.
M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramics coloured tiles of size 450x300x 7mm/350x250x7mm thick in vertical surfaces such as skirting/dados/wall, etc over and including 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M&L for Chequered cement concrete tiles (in any shade) 20cmx20cmx25mm/30cmx30cmx25mm thick, set, jointed and pointed with grey cement and pigment in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bed or bedding layer in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.
M&L for preparation of newly plastered surface and applying two coats of oil bound distemper over a coat of primer over and including 3mm thick Birla/JK wall Putty complete all as specified and directed.
M&L 75 mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete
M&L for 10mm thick Lighft shade vitrified ceramic tiles in floors, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement over and incl 15 mm thick screed bed or bedding layers in cement mortar 1:6 to match Shade/ pattern of tiles complete all as specified and directed.
M&L for glazed/Digital coloured ceramic tiles 450 x 300x6-7 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) on vertical surfaces as backing coat of wall tiles complete all as specified and directed.
M&L for mild steel bars (TMT bars) 10 mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.
M&L for mild steel bars (TMT bars) 5 mm dia and over up to 8 mm dia in stirrups, spacers and binders complete all as specified and directed.
S&F chicken wire mesh on wall fixing with nails for plastering work complete all as directed .
S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete, size of frame 125x60mm complete all as specified.
S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated complete all as specified and directed.
S&F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long ) complete with glazing bars dovetailed or welded complete all as specified and directed.
Same as item No 111 above but without glazing bars complete all as specified and directed.
S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.
M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in bed blocks for fixing hold fasts including necessary form works complete all as specified and directed.
S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0
S&F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.
S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm.
S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.
S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked
S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long.
Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and painted with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down wall panelling and similar work
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles sover and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.
S&F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms).
S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity all as spd.
S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete.
Taking up or down steel/CPVC tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia.
S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia including cutting /chasing in walls etc.
Dismantling timber scantling 40 sqcm and over in section in any position framed work all as directed.
M&L 2nd class softwood scantling, as in repairs, to replace old and decayed timber (including piecing, scarfing, etc, or old and new timbers if required) and removing defective portions to store complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by E-in-Charge.
S&F Mild steel works as in wind ties for roof including securing bolts, all necessary drilling etc and similar work conforming to Fe-290 Gde E-165
S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed. (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc
Anodised aluminium snap grid frame work for false ceiling of grid size 605 mm x 605 mm all as specified.
Taking down carefully aluminium point wiring (any type) for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxes and making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed.
M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia in stove enamelled steel conduit ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.
Supply & fixing flame proof switch rotary type with termination box in LM 6 , 16 Amp , single pole 250 V , complete all as specified and directed.
S& F for sheet metal enclousre factory made MCB DB's SPN, 4 way, double door, 415 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete.
S&F MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.
S&F MCB SPN 40-63 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.
Supply and fixing LED light fittings 2 X 16 W flame proof , CMRI certified recommended for gas /vapour group of IIa & IIb , Zone 1 & 2 and IP 65 protection with die cast alluminium housing with heat resistant toughened glass with LED tube light fixture driver ,holder,connector etc complete with all accessories prewired including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing of flame proof cum water proof LED bulk head light fitting of 40 W, IP 66 protection of cast alluminium alloy material and heat and impact resistance toughened A clear glass having anti corrosive epoxy powder coated finish complete with all accessories prewired including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.
Supplying ,laying, jointing & testing cross sectional area 16 sqmm 4 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor including taking down existing old /unserveciable cable complete all as specified & directed. Note: Excavation, earth work, sand cushioning & Bricks shall be measured & paid separately under respective items.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cables etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L Sand cushioning with dry local sand for cable protection of under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.
Supply and laying dry well burnt locally available brick sub class'B' laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.
Taking down copper point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.
M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.
Same as item No. 154 here-in-before but one 3 pin, 5amp socket out let on independent board.
Same as item No. 154 here-in before but 3pin ,5amp socket out let on the same board with other switch.
Same as item No. 154 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm.
M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match with existing surface complete all as specified and directed.
M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed.
M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x2.5sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed. Note - Two runs of 4 Sqmm and one run of 4 Sqmm including PVC conduit shall be measured as unit length.
S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.
S & F for 2/3 pin, 5 Amp/ 6 Amp, socket outlet, flush type, 2 in 1 complete all as specified and directed.
S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed.
S&F ceiling rose single phase, PVC poly carbonate, insulated body three terminals ISI marked complete all as specified and directed.
S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete suitable for 1 x 100 Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 100 Amp in the DB with connection testing and commissioning complete all as specified and directed.
S& F for sheet metal enclousre factory made for MCB DB's SPN, 12 way, double door, 240 Volts 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. Note:- The rates quoted shall also be deemed to be included the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.
Supply & fixing fan regulator, socket type compatible for BLDC fans, single phase complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed/ceiling type with high efficiency warm type PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fixing LED flood light luminaires 70 Watts IP 65 type with lens incl standard fittings pressure die cast aluminium housing with heat reistant toughened front glass housing with epoxy powder coated finsh and , complete with control gear box and all accessories duly prewired and connecting to junction box and testing complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and directed.
Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed including taking down old unsv one and deposit in MES store for BER.
S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
technical_846265.pdf
techsummary_846265.pdf
finance_846265.pdf
BOQ Comparative Chart
xlsx
finsummary_846265.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.40 MB
ParticularSpecification9011.pdf
Tender Documents • 1.41 MB
Credit9011.pdf
Additional Documents • 0.06 MB
Tender9011.pdf
Tender Documents • 0.62 MB
BOQ_846265.xls
BOQ • 3.94 MB
Download all tender documents and submit your bid