AMC of P.A System at SSKM Hospital

Amount

Preventive & corrective maintenance of Central Public Address system incl. DSP, Amplifier, Network Switch with SFP module, Zone controller, Gooseneck Microphone, Speakers, UPS, Voice Logger, EPBX, Desktop, FO network etc. as per terms & condition. (As per attached Annexure I&II)

Replacement cost for following supply and installation of spare parts (Consumable spares & emergency spares ) as and when required for annual preventive and corrective maintenance of Central Public Address System)

SITC of Installation PA Amplifiers 1X Line 200mV unbalanced input through 1/4" phone socket , 1xLine 200mV balanced input & 2xLine 1V balanced inputs through XLR connectors, one 1V input having priority over all other inputs. 100V input is provided for connecting another amplifier's output in long line applications. Ground lift switch provided at rear panel which helps reducing the hum that occurs due to multiple ground loops in the installations. Resettable circuit breaker for protection against overload and short circuit. Loop through output for connecting another booster amplifier. 482.6mm(19") Rack mountable chassis. Instant tranfer to DC power (Car Battery ) if AC power fails. Specification: Power output : 750W max,600W RMS at 10% THD 550W RMS at 5% THD, 500W RMS at 2% THD,480W RMS at 1% THD. Output Regulation : ≤2dB, no load to full load at 1kHz. Input channels: 1X200mV/470kΩ(unble), 1X 200mV/50kΩ(bal.), 2X 1V/50kΩ(bal.), 1x100V Input/50kΩ . Frequency Response: 50-15,000Hz ±3dB. Signal to noise ratio: 60dB. Tone controls: Bass ±10dB at 100Hz, Treble ±10dB at 10kHz. Output: Loop through 2X200mV/600Ω, 2X1V/1kΩ. Speaker outputs: 4Ω ,8Ω, 70V & 100V. Power supply : AC 220-240V 50/60Hz DC 24V (2X12V Car Battery). Power consumption :AC 1200VA DC 15A. Make - AHUJA/ BOSCH/ DPA Amplifier/Bose/Sonodyne or as approved

SITC of Dante AVIO adapter is a complete, high performance Dante network device, Configurable via dente controller. Network Transport: Dante Audio over IP AES67 RTP transport format. Frequency Response : 20Hz to 20KHZ(±0.5dB) Max signal level (Balanced): +18dBu/+4dBu/0dBu 0dBV/-10dBV 16,24, and 32 bit audio support. Input connectors type:two XLR Male , power require: power over Ethernet (class 1 802.3af) Make - Audinate /Ugreen/ Krammer, Model no. ADP-DAO-AU-0X2 or as approved

SITC of POE Injector it can work with all standards IEEE 802.3 , IEEE 802.3u, IEEE802.3ab, IEEE 802.3af POE compliant PDs (Powered Devices) plug and play. LAN IN Port : one 10/100/1000Mbps Auto-Negotiation RJ45 LAN port (LAN IN) LAN Out Port : One 10/100/100Mbps Audio -Negotiation RJ 45 POE Port (POWER + DATA OUT) , Power Input: Input External 48VDC power adapter. power Output: Output Auto - determine the necessary power requirments (max.15.4W) Network Media: 1000BASE-T:UTP category 5, 5e, 6 cable (Max 100m) Make - TP-Link / Ugreen/ Krammer , Model No.TL-POE150S or as approved

Dante enabled Digital Signal processor. Bose (ESP-880)

Network Controller with Power Supply unit. Bose (CC 64)

16W Speaker for Indoor. Bose as per approval of EIC

15W Horn type Speaker. JBL as per approval of EIC

30W Horn Type Speaker. JBL as per approval of EIC

L2 managed Switch with Redundant Power Supply Cisco. as per approval of EIC

1000 Base SFP Module Cisco as per approval of EIC

24 port LIU with SC type Pigtels, Coupler and all accessories Make: Molex/D-Link as per approval of EIC

PATCH CORD SC TO LC Minimum 4x10G Ports./ UTP tc Moilex: Molex

SMF battery for UPS (Make Exide/Amaron) a)12V,42AH-16nos. b) 12V,26AH—42nos.

1.1 KV, Gr. 1.5 Sqmm unarmored Speaker Cable . Finolex / Havells/Polycab/RR Kabel).

12 core Single mode Optical Fiber Cable. (Finolex / Polycab/RR Kabel)

Making of suitable RCC Pit for OFC Joint Chamber. As per satisfaction of EIC.

Cable Manager for RACK. as per approval of EIC

Fan unit for RACK as per approval of EIC

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

SUBHAM UDYOG

Consulting Technologies