SPECIAL REPAIRS TO WIRING OF BLDG NO. K-322, K-56 AND K-480, PROVN OF LED STREET LIGHTS WITH POLE AND PROVN OF WTER TANKS WITH STAGING AT KALIMPONG UNDER GE 867 EWS

Amount

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit of suitable size fixed on walls/ceiling with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No.1 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit of suitable size fixed on walls/ceiling with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawn through and including rigid non metallic PVC conduit of 25mm dia fixed on walls/ceiling with all necessary fittings, connecting terminal ends including provision of 1 run of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly including taking down old unserviceable wiring and making good disturbed surfaces complete all as directed by Engr-in-charge. Note: 3 runs of 6 Sqmm and one run of PVC conduit shall be measured as one unit length. Make for Item No. 1 to 4 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza (vii) SUDHAKAR (viii) MERCURY(ix) DIAMOND (x) AVON

S&F switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose, 3 terminal, PVC/Polycarnonate insulated body complete all as specified and as directed by Engineer-in-Charge.

S&F lamp holder, PVC/Polycarnonate insulated body with back plate for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 5 to 9: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

S & F Energy efficient LED tube light fitting, 1x18/20 watt, with bipin holders, connector block, etc., complete with all accessories internally pre-wired and including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No- Batten REGALBATENT8UPTO1X22WSSBSWH and ROD PHOTONULTRA 1213T8SSTL20WLED865SPC of Havells or Cat Part No - DMLN1LT8-16 and LTT8 and LTT8-20 of Crompton Greaves Ltd or philips Model - Astra Line Scene Switch Plus , HSN Code : 94051090 or equivalent in Bajaj/Wipro.

S & F IP66 & IK09 integral LED Bulk Head luminarie with housing made of Pressure Die Cast aluminum & Optical cover made of Opal Polycarbonate for glare free lighting System Lumen Output of minium 600 lumens Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminarie should be with Opal difussed Polycarbonate Color temperature 6500 K, CRI > 80, Housing - High pressure die cast aluminium , Mounting - Surface , THD < 20% , PF > 0.9 , Operating voltage range 120V -277V AC . Submission of LM80-08 for LED source & LM79-08 for luminarie from third NABL Accredited Lab / UL mandatory including 10 Watts LED bulb and connecting up with 3.0 core, 0.5sqmm copper conductor sheathed including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Philips Cat part No " WT 202W LED 6S CW PSU S2 PC or Crompton Cat part No LBHE-10-CDL or Bajaj Cat Part No BIBWP 10W LED or equivalent in Havellsj/Wipro.

S & F LED Adore 7 W B22 CDL Ball Lamp, lumen output - 665, CCT - 6500 K, complete complete all as specified and as directed by Engineer-in-Charge. Make: Havells, Cat Part No - HLDERHEML8X007 or equivalent in Crompton/Philips/Surya.

S&F sheet metal enclosure DB SPN 8 way 240 V with 200 Amp rated bus bar, powder coated, double door including taking down old unserviceable DB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 13 to 15: Legrand/Siemens/Schindler.

S&F LED security light suitable for 20 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 1.2 m long 25mm dia light grade GI bracked fixed on wall by means of nuts, botls and clamps. complete with all accessories internally prewired and including connecting up with three core PVC sheathed flexible copper conductor cable of size 1 sqmm including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part No LSTS-25-CDL of Crompton or or equivalent in Philips/Havells/Bajaj/Wipro.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I including taking out existing earth plate etc., complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5 in depth for taking out /laying of cable etc., or for foundation of poles and getting out in soft/loose soil.complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5m wide, exceeding 1.5 m and not exceeding 3 in depth for taking out /laying of cable etc., or for foundation of poles and getting out in soft/loose soil.complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soil, including spreading leveling, watering and wall ramming in laying not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exe 50m and depositing where directed at alevel n.exe 1.5m above the starting point complete all as directed by Engineer - in -Charge.

Supply and spreading of dry sand in trenches for cable coushioning and punned down complete all as specified and directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose.

Supply and laying unreinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.

M&L for common burnt bricks, sub class 'B', of size 250 x 125 x 75 mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.

Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core and connecting with necessary lugs including taking down exising unserviceable service cable with bracket complete all as specified and directed by Engineer-in-Charge.

Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm 3 core and connecting with necessary lugs complete all as specified and directed by Engineer-in-Charge. Note for Item No. 25&26:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI

Material and labour for 40 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection including taking down/out existing pipe complete all as specified and directed by Egineer-in-Charge. Make: TATA/ZENETH/JINDAL or equivalent as approved by GE.

Supplying & erecting of steel tubular swaged pole conforming to IS, specification complete with MS base plate, finial taper plug, bolts, nuts, type 410 SP-22, 8.50 mtr long and painted internally two coats of bituminous paint through out and externally upto planting depth and painting external exposed surfaces with two coats of alluminium paint over one coat of redoxide primer including provision of black and yellow paint strips of 05 Nos of 30 cm wide strips or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering of poles with writing letters or figures ( Block ), height minimum 10 cm & letters or figures n'exc 10 Nos for electric LT/HT/SL including clamp complete all as specified and directed by Engineer-in-Charge. Note: Earth work, excavation, PCC foundation, PCC coping shall be measured and paid seperately.

M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M & L Plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-in-charge.

Material and labour for 20 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection complete all as specified and directed by Egineer-in-Charge. Make: TATA/ZENETH/JINDAL or equivalent as approved by GE.

Material and labour for 40 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection complete all as specified and directed by Egineer-in-Charge. Make: TATA/ZENETH/JINDAL or equivalent as approved by GE.

Supply & fixing LED street light fitting 70Watt, with LED lamp, including bracket made out of 40 mm dia light grade GI pipe not less than 1.2 mtr long bent to shape duly fixed with MS clamps of MS flat 40x6 mm, nut, bolts etc., complete fixed to steel tabular poles including electrical connection complete with one runs of 1.5 Sqmm three core copper cable ISI marked drawn in and including rigid PVC pipe of 15mm dia clamped to pole from LT terminal box to fitting complete all as specified and as directed. Make: Philips Cat part No. (HSN Code) 94054090 or equivalent make of Havells/CG as approved by GE.

M & L for DK Thermoplastic cable junction boxes IP 65 of size 185x165x60mm of metric knockouts for cable entry, weather proof for outdoor installation with and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut and bolts incl provn of 01 No of single pole MCB 6-32 amps,10KA inside the box complete all as specified and directed by Engineer-in-Charge. NOTE: Make of Junction box shall be Sintex or equivalent as approved by GE.

S&F 25mm dia medium grade GI tubing with all fittings and fixtures complete laid in trenches, floors, etc., all as specified and as directed by Engr-in-charge.

S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete laid in trenches, floors, etc., all as specified and as directed by Engr-in-charge. Make for Item No. 35&36: TATA/ ZENITH / JINDAL

S&F gun metal gate or globe valves 25 mm bore, with iron wheel head, screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.

S&F gun metal gate or globe valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.

Supply and fixing Rotational moulded polyethylene water storage tank cylindrical vertical double layered 1000 ltrs capacity with closed top hoisted and fixed in position all as specified in SSR Part I complete all as directed by Engr in charge Make: SINTEX/ INFRA/ GP/ ROTEX/ ORIPLAST/ ASHISH/ POLYCON

S&F Symet ball valve 25 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 25 mm 455 gms complete all as specified and directed by Engineer-in-Charge. Make: PRAYAG/POLYTUFF or equivalent as approved by GE.

M&L for Plain cement concrete 1:4:8 mix type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed by Engr-in-charge.

M & L Fe 290 Gde -E-165 mild steel as in framed brackets of angles or tees with web and flanges cut to shape, drilled and counter-sunk for screw, including bending and weilding angles as necessary , gusset plates, riveting etc, n exc 10 kg each brackets and painting with two coat of black bitiminious paint over a coat of Red Oxide primercomplete all as specified and as directed by Engineer-in-Charge.

S & F centrifugal monoblock single phase pump set Crompton model No MIK-22C pipe size 50 x40 , 2 HP , 1.5 KW , 2830 RPM discharge LPM 405-200.complete all as specified and as directed by Engineer-in-Charge. MAKE: Crompton/Havells/Bajaj or equivalent as approved by GE.

S & F electronic control panel suitable 4" sub pumps Crompton model No. ECP2 -ET , 2 HP complete all as specified and as directed by Engineer-in-Charge. MAKE: Crompton/Havells/Bajaj or equivalent as approved by GE.

S & F water hose pipe heavy duty 8mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F brass spray changing nozzle complete all as specified and as directed by Engineer-in-Charge.

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawn through and including rigid non metallic PVC conduit of 25mm dia fixed on walls/ceiling with all necessary fittings, connecting terminal ends including provision of 1 run of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly complete all as directed by Engr-in-charge. Note: 3 runs of 6 Sqmm and one run of PVC conduit shall be measured as one unit length. Make Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza (vii) SUDHAKAR (viii) MERCURY(ix) DIAMOND (x) AVON

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 8,514.00 B/F from Ser page No. 31 NOTE: Bidder shall insert credit amount as rate Rs. 8,514.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

C. M. AGARWAL AND CO

MS BRAHMA CONSTRUCTION

G K SUTHAR

HEM RAJ GURUNG

SANJAY MITTAL

M/S S.K. ENTERPRISES