GE 874/EWS-16/2024-25

Amount

Dewatering/pumping/bailing out contaminated with waste material sludge from septic tank along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area including taking off manhole covers and putting back the same after cleaning/ removing the liquid waste material of septic tanks and cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150 x 200mm and finally spraying unslaked lime (bleaching powder), dry, around and over the septic tank all as directed and to the entire satisfaction of by Engr-in-Charge. Note:- 1. Qty of liquid sludge shall be measured for payment under this item. 2. Arrangement of Land for the disposal of waste is complete responsibility of contractor. 3. Arrangement of suction machine is responsibility of contractor.

Supplying two Nos of manpower (2 Safaiwalas daily) to provide services of cleaning of blockages of sewage lines of any dia and depth, manholes of any size and depth, working in foul condition cleaning of manholes and sewage lines by rodding to and from, flushing with water in sewage lines between successive manholes and keeping the system functional including water closets, floor traps, Nahani traps, gully traps etc, upto final drop/outlet into septic tanks, Dewatering contaminated/ with fine waste material sludge from septic tank and soakage well of any capacity/depth, Cleaning of septic tanks of various capacities including chambers, outlet chambers and removing out all waste solid material / sludge by mean of manually or mechanically and disposing the same to a distance n. exc. 50 mtr and burring in borrow pit within the premises complete including covering with fresh mud, finally spraying unslaked lime, dry, around the septic tank, soakage well and over the pit complete, including cleaning of soil/waste/vent pipes and rain water pipes of any description and size in the area of Drugmulla (lower/upper) Garrison by two Nos Semi-Skilled/unskilled Tradesman, (having minimum educational qualification of matriculation) and in one shift of eight Hours per day (from 900 Hrs to 1700 Hours) for attending complaints of sewage cleaning as instructed by concerned JE with complaint slip and report back to the same JE including maintaining of the record of complaint slips after getting signature of users, complete all as specified and as directed. Note:-Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer.

Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 deep for foundation for shafts, wells, cesspits, manholes etc not exc 10 sqm on plan and getting cut in soft/loose soil complete all as specified and directed.

All as per item No 3 here-in-before but exceeding 1.5 mtr and n.exc 3.0 m depth.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to bed of drain pipe including packing under and haunching against the side of of pipe 150 mm dia (internal) after these are laid in trenches complete all as specified and directed.

S& F 150 mm bore reinforced concrete pipes, class NP2, laid in trenches & jointed complete with collars complete all as specified and directed.

M&L for PCC 1:4:8 type C-2 using 40 mm graded stone aggregate for foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate for manhole bedding and coping and casting of post including necessary form work complete all as specified and directed.

M&L for returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed

M&L for removal of excavated material to a distance not exceeding 50m and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F mild steel round or square bars Confirming to F-410 W (Gde E-250) Quality A work in rungs, hooks, handles, manhole covers, hold fast & small articles complete all as specified and directed.

M&L for cutting into existing manholes for Internal dia of Pipe 150 mm dia pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and directed.

M&L for extra for forming fair finished drain or channel up to 30 cm inner girth in cement concrete, using extra cement including forms/moulds/mitred stopped ends etc complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specially provided for complete all as specified and directed. Note: -Reinforcement shall be cut as required to facilitate demolition.

M&L for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, of any thickness, size or shape including necessary form work, set and jointed in cement mortar (1:4) complete all as specified and directed.

Demolition of existing sewage RCC pipe of any dia and in any Position and any depth removing from outside of defence land complete all as specified and directed.

M&L for mild steel bars 10mm dia and over, Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per srl item No18 above but 5mm to 10mm dia as in stirrups, spacers binders etc.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortal 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed.

M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement-based paint over a coat of primer complete all as specified and directed.

M&L for 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only water proofing compound as per IS-2645.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

S&F for 75mm to 90 mm thick Steel Fibre Reinforced (SFRC) cover with iron frames (Light duty) complying to the standard specifications as mentioned in the IS 12592 BIS standard, minimum load bearing capacity 2.5 ton, in square, rectangular or circular shape complete all as specified and directed.

M&L for providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m openable length ( total length 90m) having 50 Nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick 0 and weight 43.478 gm/metre complete all as specified and directed. Note:-Cost of M.S. angle, CC Blocks shall be measured paid separately.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. in any mortar complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with greay cement and pigment complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation all as specified and as directed

M&L for hardcore of gauge (broken bricks) n exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90 cm complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed copings, packing around interlocking paver. and fixing of Y angle section complete all as specified and directed.

Dismantling structural steel work including doors gates etc complete all as specified and directed.

Excavation in post hole each n. exc 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer n. exc 25 cm, watering and removing surplus soil to a distance n. exc 50m and making good surfaces in soft/loose soil complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 as in foundation filling and mass concrete for MS angle posts complete all as specified and directed.

Dismantling fencing wire mass any type complete all as specified and directed.

S&F mild steel work as in angle iron fixed independently without connecting plates complete as in fencing post or struts/ 'Y' section including cutting shape as directed, drilling holes, welding notching wire including embedding in concrete and screwing conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

Fixing only chain link fencing Including Line wire any mesh size and type to any type of standard rails straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only chain link fencing mild steel galvanisd, any size or type complete all as specified and directed.

Dismantling of old unserviceable barbed wire etc complete all as specified and directed.

S&F in repairs GI 2 standard steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stranded rails, straining bolts including securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins etc complete all as specified and directed. Note: -Each line of wire shall be measured.

M&L mild steel bars 10mm dia Round and plain Bars and over cut to length bent to shape required including cranking bending for support of chain link fencing including nut and bolt Fe-410-W) (Gde.E-250) Part- I quality-A complete all as specified and directed.

Demolition cement concrete (un reinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal of all rubbish/materials complete all as specified and directed.

S&F precast compound wall panel M-25(design mix) colum size 200mmX200mm including excavation of pit 450mmX450mmX600 mm & fixing with cement concrete 1:2:4 type B-1 and wall panel plank thickness 50mm having a groove to interlock to each other including reinforcement &transportation of precast material up to site and fixing colum section and plank. The post is reinforced with 4 Nos of 8 mm dia TMT steel and panels are reinforced with 3 Nos longitudinal bars of 6 mm dia TMT steel & 6 mm plain MS Strip up at 60 mm for each. wall panel colum length and height as per requirement complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 including ornamental and intricate design and portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L RCC work M-25 design mix (using 20mm graded crushed stone aggregate) as in slab supported in walls cantilevers etc complete all as specified and directed

M&L for form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick (Horizonal or sloping) complete all as specified and directed.

M&L RCC work M-25 Design Mix (using 20mm graded crushed stone aggregate) as in foundation including, raft, plinth beam bases for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed.

M&L RCC work M-25 Design mix (using 20mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts complete all as specified and directed.

M&L form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

M&L form work to side of pillar posts struts piers columns etc complete all as specified and directed.

M/S MUNEER AHMAD WANI CONSTRUCTIONS

patriotic builders

Bidder Name

M/s KASHMIR BUILDERS

patriotic builders

M/S MUNEER AHMAD WANI CONSTRUCTIONS