SPECIAL REPAIRS TO STREET LIGHT IN BETWEEN POST NO 01 TO 02 AT AFMSD KANDIVALI, REPLACEMENT OF BER FAN, GEYSERS, PROVN OF 15 NOS OF SECURITY LIGHT AT KMC AND CERTAIN MINOR WORKS AT MALAD UNDER GE NORTH MUMBAI

Amount

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, cable trenches etc, not exceeding 10 sqm on plan and getting out hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:4:8 type D-2 using 75mm thick using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete including necessary formwork etc complete all as specified and as directed by the Engineer-in-charge

Material and labour for Plain Cement Concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping of poles including necessary formwork etc complete all as specified and as directed by the Engineer-in-charge

Material and labour for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in kerb stone of size 300mm x 400mm x 100mm in required shape finished smooth, set in cement mortar 1:4 including excavation earth work in any type of soil complete all as specified and directed by Engineer- in-Charge.

Removing excavated material to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.

Supply and fix machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks and filling the joints with sand complete all as specified and directed by Engineer- in-Charge.

Supply and fix Steel work in tubular trusses, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 including all necessary staging, scaffolding, etc as required to work at any height complete all as specified and directed by Engineer- in-Charge.

Supply and fix mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer- in-Charge.

Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints Ltd - Apcolite/Goodlass Nerolac (Nerolac)/ Berger Paints Ltd - Luxol/Shalimar Paints - Superlac/Jenson Nicholson - Brolac

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Supply and lay 63 mm bore high density polyethylene pipes (HDPE) Double walled corrugated DWC with steel reinforced, type 450N as per IS-16205 and including couplers an dbend for cable protection laid in trenches complete all as specified and as directed by Engineer-in-Charge. Make : TELEREX or equivalent with ISI mark as approved by GE

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for point wiring with two 1.5 sqmm FRLS grade PVC insulated cable 1100 volts grade as per IS-694 stranded copper conductor cable drawn through and including in PVC conduit concealed complete with all fittings and accessories and 1.5 sq mm stranded copper conductor cable FRLS grade PVC insulated for earth continuity including cutting chases on wall/floor etc. not exc 10 cm girth and making good the disturbed surfaces of wall with cement mortar 1:3 all as specified and directed for one light / Fan/bell/Exhaust fan Point controlled by one switch, one MS pressed 1.6 mm thick terminal box with 3 mm thick hylam sheet ISI marked top cover with brass screws and cup washers for housing switches, socket outlets, fan, regulators etc, all as specified and as directed by Engineer-in-charge.

Supply and fix in repair Switch Piano, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repair Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix electric water heater, storage type steel body with copperinner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Flexible heat resistant steel armoured connection pipe 45 cm long (02 Nos) with brass nuts etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells Code No GHWAMJSWH025 (Type Monaza Digi white gray colour) or equivalent Venus Bajaj & crompton

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) including suitable size of hanging clamp, nut and bolt etc complete all as specified and as directed by Engineer-in-Charge. Make : Usha, Model : Technoair BLDC 5 Star, Colour : White or equivalent to Bajaj /Orient/Havells

Supply, lay, test and commissioning of LTUG, XLPE insulated, heavy duty, 1100V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, laid in trenches or passing through pipe, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Make: PARAGON/FINOLEX/PLAZA/POLYCAB/KALINGA/HAVALLS Note : Earthwork excavation and cable protection pipe (DWC) shall be measured and paid separately in their respective items

10 Sqmm x 2 core

10 Sqmm x 4 core

25 Sqmm x 4 core

Supply and errect 7 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light. The bottom of Pole shall be 130mm dia and top shall be 70mm dia with 3mm thickness, high tensile strength confirming to BS EN 10025. Base plate shall be 220x220x12mm with 4 Nos of anchor bolt 'J' type 700mm long 20mm dia with nut, washer and bolt shall be inserted to RCC footing. The pole shall have internal in built Junction box including 3 phase busbar and one 6 Amp MCB complete including necessary earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, formwork etc complete all as shown in Bajaj electrical Ltd drawing No E&PBU-SL-WR-2015-002 and as directed by Engineer-in-Charge. Note: (i) The unit quoted rate shall deem to be included for earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement & formwork. (ii) Bajaj electrical Ltd drawing No E&PBU-SL-WR-2015-002 is enclosed herewith and the same shall form part of tender.

Supply, install, test and commission LED street light fitting 70 watts, rating, separate individual peanut plated lens and aluminium reflector housing made of LM6 pressure die cast aluminium. Optical cover toukghned glass only, impact resistance>IK05 IP protection not less than IP66, protection should be class I vibration as per IEC 60598, product standard IS 10322/IEC60598, all the component such as driver, surge protector should be of same make. Driver should be moulded type with operating voltage 140V270V, driver frequency 50 Hz power factor >0.9, Lumen output should not be less than 130 lumen/watt and luminaire driver ckt, moulded type weather proof construction with seprate surge protection device 5 KA rating and separate connector block for termination of incomming cable connection all as specified and directed by Engineer-in-Charge. Make - Phillips Cat part No - BRP410LEDCW 072 MRFG S1 PSU GR or Equivalent to Osram / Havells / General electric (GE)

Supply and fixing 3 core PVC insulated and unsheathed 1100 volt grade multicore cable 2.5 sqmm with stranded copper conductor cable drawn inside the pole whereas required with making necessary holes on bottom and top of pole from looping box to security light fitting etc complete all as specified and as directed by Engineer-in-Charge. Make: Finolex / Plaza / Anchor / Havells / Polycab

Supply and fix GI pipe, medium grade, 40mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply and fix GI pipe, medium grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip 25 x 3.5mm, 7.5 m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate and protected by 32 mm bore light grade galvanised iron pipe complete all as shown in electrical plate No.5 of MES schedule Part I, 2009 with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Supply and errect 9.0 metre long steel tubular swaged poles type 410 SP-31 complete with cast iron base plate, finial taper plug, bolts, nuts & screws all as specified and as directed by Engineer-in-Charge. Note: Earth work excavation, PCC for foundation and coping will be measured and paid separately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune

Material and labour for cutting the existing bituminous road / hard standing of size not exceeding 45cm wide and depth exceeding 30cm and not exceeding 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6, type C1 using 20mm graded aggregate complete all as specified and directed by Engineer-in-Charge.

Supply and fix Astronomical Time switches (Astro) 110-240V AC single Phase-2 wire 2 channel (longitude and latitude of Indian cities) including fixing in existing panel with neccessory wiring and connections complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of street light bracket arm fabricated out of 40mm dia GI tubing medium grade 1.2 meter long bend to shape fixed on pole with including 2 pair of clamps of fitted with suitable size nuts, bolts washers including one coat of paint complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs cable junction box made out of thermoplastic sheet, IP66 protected outdoor installation of size 200 x 160 x 98mm with 4 way bakelite cable terminals including 03 Nos polyimide gland with check nut (M-32- 2 Nos) fixed on poles with flat iron clamps of size 25x3mm, nut, bolt, washers etc including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and provision of one single pole MCB 6 amps for controlling light etc complete all as specified and as directed by Engineer-in-Charge. Make : Sintex GS-JB-2014 / K-8250 of Hensel or equivalent in National

Supply and fix MCCB 4 pole, 63 Amps, 415 Volts, 50 Hz, 25 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Belno

Supply and fix feeder pillar box suitable for out door installations of size 450x600x600mm complete with clamps made out of 40mmx6mm thick with suitable nuts, bolts etc painting with one coat of red oxide and two coats of synthetic enamel paint over it complete incomming and out going cable entries including necessary fixing arrangement as per site requirement and the following accessories housed in etc complete all as specified and as directed by Engineer in Charge. (a) MCCB 4 pole 63A - 01 No (b) MCB TPN 32A -02 Nos (c) Timer switch TSQ 100-01 No (d) 4 Pole contractor, 415 volts,50Hz, with 230 volts no (e) Volt coil, 60 Amps capacity-01 No (f) Toggle switches for bypassing the timer switch-01 No

EVEREST POWER CONTROL ENGINEERS

DHARMESH ENTERPRISES