Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.7 L+₹4,695 (0.12%)Rejected-Finance M S SODHI TRADING DEWAN BAGH BARAMULLA JAMMU AND KASHMIR 193101 UDYAM JK 03 0006100 01ABYFS3595H1ZM B R | BARAMULLA | JAMMU AND KASHMIR | 193101 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹46.1 L+₹8.5 L (22.5%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 |
Tender Value
Refer Docs
EMD Value
₹84,000
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (UTILITIES)
GE (UTILITIES) UDHAMPUR, PO-GARHI, PIN-182121
Certain B/R repair and allied works in AC Refg installation, maint works in AC Refg installation and OTM Accn other sites under GE (Utilities) Udhampur
2022_MES_554826_1
GE/U-55/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (UTILITIES) UDHAMPUR
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹84,000
Yes
9 Dec 2022
28 Sept 2022
28 Oct 2022
28 Sept 2022
26 Oct 2022
12 Oct 2022
Amount
Taking down chowkat or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exceeding 1.00 Sqm not exceeding 2.00 Sqm each and removing from site complete all as specified and directed by Engr-in-Charge.
Powder coated (of approved color) aluminium sliding window of any shade with frame of section 100mm x 45mm , thickness of sheet 16 gauge , including sliding shutter with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 4 mm thick Tinted glass and necessary Aluminium mongries and handles, locks complete all as specified and directed by Engineer-in-Charge.
Powder coated (of approved color) aluminium door frame of any shade with shutter of section 100mmx 45mm, thickness of sheet 3mm , partly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongeries i.e. 200mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5 mm thick tinted glass and 12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure to each shutter complete all as specified and directed by Engineer-in-Charge.
Aluminium (Diecast) body Door (in repair) closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed by Engr-in-Charge.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
Vitrified ceramic tiles 10 mm thick Double charged (sq/Rectangular) polished,area of each tiles exc 0.36 sqm but not exceeding 0.42Sqm ,in Floors etc.set and jointed in neat cement slurry over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.
All as per item No 8.00 here-in-before but as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-Charge.
Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles complete all as specified and directed by Engr-in-Charge.
Kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and directed by Engr-in-Charge.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick plaster in CM (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and directed by Engr-in-Charge.
Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc. 0.06 SQM and but n.exc. 0.11 SQM in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.
Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.
Dismantling wall and ceiling boards any thickness, including cover fillets etc complete all as specified and directed by Engr-in-Charge.
GI frame work 605x605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit / tie / purlins etc, at approx 900 mm centre to centre with GI cleat and steel suspenders of appropriate size fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including provision of 4 mm thick non-asbestos fibre cement board, ISI marked, fixed to snap grid frame works 605 x 605 mm as in ceiling, flat or sloppy as per manufacture's instructions, complete all as specified and directed by Engr-in-Charge.
Solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed by Engr-in-Charge.
18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws ,including hinges,hasp staple complete all as specified and directed by Engr-in-Charge.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.
Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-50) quality-A, steel work duly painted with one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed by Engr-in-Charge.
Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.
Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.
Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) with and including mixing of water proofing compound complete all as per manufacture's instructions complete all as specified and directed by Engr-in-Charge. Note:- (i) WPC shall be measured and paid separately under relevent items) as on walls. (ii) Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.
Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls complete all as specified and directed by Engr-in-Charge. Note :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.
Applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer complete all as specified and directed by Engr-in-Charge.
Applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer complete all as specified and directed by Engr-in-Charge.
Two coats of cement base paint over a coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after conplete removal of existing treatment upto 5-10 m height from ground level and at all locations as directed including , scaffolding, cleaning and curing etc. complete as specified and directed by Engineer-in-Charge.
Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed by Engr-in-Charge.
Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
All as per serial item No 32.00 here-in-before but except bricks, complete all as specified and directed by Engr-in-Charge. Note : Old bricks obtained against demolition shall be used.
Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
All as per serial item No. 34.00 here-in-before but except stones, complete all as specified and directed by Engr-in-Charge. Note : Old stones obtained against demolition shall be used.
Flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both sides, 40mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and directed by Engineer-in Charge.
Factory Made PVC Moulded Door Shutter of wallnut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, fix in frame at site as per specification & drawing as per specification & drawing complete all as specified and as directed by Engr-in-Charge. Make: Rajshree Doors or equivalent as approved by GE.
Aluminium sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-in-Charge.
Aluminum handles cast type, anodised, 150 mm size complete all as specified and directed by Engr-in-Charge.
Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr-in-Charge.
Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame complete all as specified and directed by Engr-in-Charge.
Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in-Charge.
Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
Plain cement concrete, M-10, (1:3:6), type C-0 (using 12.5mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-Charge.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete, (Nominal mix) M-15, (1:2:4), type B-1(using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge. Note : Reinforcement shall be measured and paid separately.
Form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work not exceeding 200mm thick (horizontal or sloping) for rough finish surfaces, complete all as specified and directed by Engr-in-Charge.
TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.
TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.
Supply only liquid water proofing compound of approved quality, complete all as specified and directed by Engr-in-Charge.
Preparation of old plastered or unplastered surfaces of wall and applying one coat of anti-fungal acrylic emulsion paint (Appex) any tinted complete all as specified and directed by Engr-in-Charge.
Steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3. (ii) MS fillets, glazing wire gauge shall be measured and paid seprately.
All as per serial item No. 54.00 here-in- before but without glazing bar complete all as specified and directed by Engr-in-Charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 sheet 1/3 to 3/3. (ii) MS fillets, glazing, wire gauge shall be measured and paid seprately.
Factory made mild steel ventilators box type with upper top hung shutter and bottom fixed type shutters including pintol hinges and ,steel peg stay and one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
Expanded metal exceeding 4.00kg per sqm cut to length, bent to shape and welded with MS angle iron frame complete all as specified and directed by Engr-in-Charge.
Stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in-Charge.
3mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.
Dismantling Asbestos cement (corrugated,semi corrugated, etc) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.
6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.
All as per serial No. 62.00 here-in-before but except sheet corrugated or semi corrugated in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.
Asbestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.
Bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge.
Precast reinforced cement concrete, (Nominal mix), M-15, (1:2:4), Type B-1 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. Note : Reinforcement shall be measured and paid separately.
Plain cement concrete, (Nominal mix), M-15, (1:2:4), type B-1, (using 20mm graded crushed stone aggregates) as in cills, coping, apex stone, bed plates and lintel upto 1.6m clear span etc including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed by Engr-in-Charge.
2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.
Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.
200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engr-in-Charge.
Mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.
Mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-in-Charge.
Mild steel pressed handle oval type stove enamelled black, 150mm size complete all as specified and directed by Engr-in-Charge.
Stainless steel wire cloth(in repair ), 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and directed by Engr-in-Charge.
Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and erecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Precast cement concrete jallies 25mm thick (measured solid set in cement mortar 1:4 incl all moulding and necessry form work, complete all as specified and directed by Engr-in-Charge.
Providing and applying Polymer modified cement mortar of average thickness 30-40mm using Polymer in two layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster complete all as specified and directed by Engr-in-Charge . Make :- SIKA - Sika 122 HS FOSROCK - Renderoc HS xtra Note:Plaster can be carried out in patches and 15-20 Mtr Height of Bldg/Lift Duct.
SODHI TRADING CORPORATION
VIRINDER SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .