REPAIR TO INTERNAL ROADS IN CERTAIN AREA AT VSN, NAGPUR.

Amount

Material and labour for 7.5 cm thick (compacted thickness) WBM with coarse aggregate of grading 2 (90 to 40 mm size) of granite, trap or basalt, spread rolled and consolidated to gradient and camber required all as specified and directed.

Material and labour for preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt all as specified and directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with mechanical air compressor to remove all loose dirt etc all as specified and directed

Material and labour for applying tack coat with bituminous primer @ 5kg/10Sqm of paving bitumen of grade VG-10 over bituminous macadam surfaces all as specified.

Material and labour for applying evenly a tack coat with bituminous primer @10 kg/10 sqm using paving bitumen of any penetration complete all as specified and directed.

Material and labour Bituminous pre-mixed semi dense asphaltic concrete 30 mm consolidated thickness with 5.5 % (Bitumen grade VG-30) binder content by weight of total mix, by hot mix process and laid by mechnical paver finisher, to required camber and gradient using 8 to 10 ton power roller and compacted all as specified and directed.

Material and labour for repair to pot holes not exc 1 sq m each including sweeping in free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and by applying tack coat with bitumen primer @ 5 kg per 10 sq m putting in premixed bituminous macadum well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes n exc 30 mm complete all as specified and directed.

Material and labour for premix bituminous macadam using paving bitumen 4% by weight of total mix laid rolled and compacted to required gradient and camber with 8 to 10 ton power roller consolidated thickness 75mm or less) and laid by mechanical paver complete all as specified and directed

Material and labour for providing 2 mm thick 'Kateline Traffix' thermoplastic road marking paint of white / yellow of approved shade for road marking not exc. 100 mm width and girth and painting lines, dashes, arrows etc on bitumen road / pavement and on concrete/ bituminous surfaces using hot processor plant including removing old paint by paint remover and cleaning with scrapers for removing all dirt/dust and other foreign matters at site and managing traffic control etc complete all as specified and as directed

Material and labour for preparation of new surfaces of kerb stone/ concrete surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paintof approved shade all as specified and as directed.

Material and labour for preparation of old surfaces of kerb stone/ concrete surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint all as specified and as directed.

Material and labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth, in hard/dense soil for foundations shafts, wells, cess pits, pier holes n exc. 10 sqm on plan and and not exc 1.5 m in depth getting out complete all as specified.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for all as specified and directed.

Material and Labour for (factory made rubber moulded) precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate solid block, exc 10 cm in width and setting in cement mortar 1:6 complete as in kerb stones etc sizes as required at site & as approved by GE all as specified.

Material and labour for moorum/red bajri filling under floors/ pavings in layers not exc. 15 cm thick, spread, levelled and rammed including watering and consolidated complete all as specified and as directed.

Supply and fixed 100% water proof aluminimum alloy die cast body solar cat eye/solar stud of size 125x125x75mm (minimum) having six numbers ultra bright LEDs (03 Nos on each side) of 5 mm dia, flushing type (flushing rate minimum 1Hz) with superior polycarbonate solar cell top cover, solar PV module powered by grade multi crystaline silicon solar cell (2V minimum), high capacity 1.2 V, 2200m AH, NI-MH battery complete (fixing of studs/cat eye shall be as per manufacturer's instruction)Visibility>800m including taking down of old one complete all as specified. Make : 3M, TATA BP OR AVERY DENNISON.

Supply and fixed 100% water proof aluminimum alloy die cast body cat eye/stud of size 125x125x75mm (minimum) having six numbers ultra bright LEDs (03 Nos on each side) of 5 mm dia, flushing type (flushing rate minimum 1Hz) with superior poly carbonate solar cell top cover, solar PV module powered by grade multi crystaline silicon solar cell (2V minimum), high capacity 1.2 V, 2200m AH, NI-MH barrery complete (fixing of studs/cat eye shall be as per manufacturer's instruction)Visibility>800m including taking down of old one complete all as specified. Make : 3M, TATA BP OR AVERY DENNISON.200mmx200mmx200mm as directed.

Supply and fix for 100 mm bore PVC (SWR) in any length fixed in cm 1:6 as in weep holes complete all as specified and directed.

S K G ASSOCIATES

SRI JD CORPORATION

vidhamal&sons

Meet Road Lines

Asha Enterprises