Loading…
Loading…
Tender Value
₹48.1 L
EMD Value
₹96,220
Closing Date
14 Oct 2026, 6:00 pm6d left
GE (West) Delhi Cantt-10
GE (West) Delhi Cantt-10
Spl repair of Garage shutter at Offrs Md Accn at Cariappa Vihar, Addn/Altn and provn of sliding door in House No 8/169 in Cariappa Vihar under GE (West) Delhi Cantt-10
2026_MES_790525_1
GE/DW/TOKEN/102 OF 26-27
Open Tender
Civil Works
Item Rate
180 days
delhi
Class D Category a(i)
9 documents required · 9 mandatory
₹500
GE (West) Delhi Cantt
₹96,220
Yes
22 Sept 2026
22 Sept 2026
16 Oct 2026
22 Sept 2026
14 Oct 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down rolling shutters of any size incl all accessories of rolling shutter complete all as specified and directed. | 646 | Sqm | - | - |
| 2 | Demolition of cement concrete (un-reinforced) of any description and in any position, including removal of rubbish out side complex (MOD land) , complete all as specified and directed. | 4 | Cum | - | - |
| 3 | Excavating in post holes in soft loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. | 102 | Each | - | - |
| 4 | M&L PCC (1:3:6) type using 20mm graded stone aggregate as in foundations, mass filling , sub base and the like complete all as specified & directed. | 15 | Cum | - | - |
| 5 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165 complete all as specified and directed. | 28,220 | Kg | - | - |
| 6 | M&L for 1.25mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as spcified and directed. | 680 | Sqm | - | - |
| 7 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed. | 4 | Cum | - | - |
| 8 | Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed. | 340 | Sqm | - | - |
| 9 | M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed. | 340 | Sqm | - | - |
| 10 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed. | 340 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
PS102.pdf
Tender Documents • 1.07 MB
BOQ_886194.xls
BOQ • 1.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .