WBPHED/EE/NMD/NIeT- 11 OF 2024-2025,Sl no 02

Amount

Supply and delivery of following materials at site

240 sqmm 3C XLPE Al Ar 1.1KV Gr as per IS7098 (Part 1)up to latest amendments

MCCB 3 pole DN3 630N 400-500A,415 V, 50Hz,50kA with thermal magnetic release of L&T or same specification of any other approved make

Dismantaling of damaged cable from starter panel and motor by disconnecting of paver block between Sub station and pump house

Laying of two cables 3C 240sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. asseparator between the bricks and cables and also trench to befilled up with shifted soil, levelling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables 3core 240sqmm.

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials 3core 240sqmm.

Dismataling and fitting fixing of damaged MCCB after diconnection of all electrical and mechanical connections with newly supplied one as per instruction of EIC along with repairing of dismanteled paver block , mending good damages.

Supply & delivery of following materials at site:-

Supply and delivery of Electromagnetic Flowmeter for DN200,24 V DC operated,Output 4-20mA/Scalable pulse output,process connection flanges ANSI ASME class 150 rating, process connection flange material carbon steel/stainless steel. Meter tube SS 304/SS316,coil housing SS 304/ Carbon Steel/die cast aluminiumwith buriable design upto 5 mtr depth.Flow sensor shall be IP 68 , flow transmitter shall be IP 67,liner shall be PTFE/hardrubber/EPDM with WRAS approval, accuracy shall be 0.5%, flowmeter shall be supplied with grounding ring/grounding electrode with two nos ASME class 150 rating process counter flanges with each flowmeter. Flow transmitter shall be supplied in a weather proof housing box along with SMPS with internal cabling and cable glands. Interconnection cable between flow sensor and flow transmitter shall not be less than 10m . Test certificate should be submitted at the time of delivery.

Installation,testing and commissioning of above supplied Flowmeter and housing box along with SMPS and internal cabling on rising main of size 200 mm near ST Pauls and Rockvill Tank by cutting the MS pipe , welding of flanges along with power and necessary arrangement for completing the work with all required materials and as per the satisfaction of EIC.

N.B.:MAKE: AS PER PHE APPROVED VENDOR LIST

Add GST @18%

Add Labour Welfare Cess @ 1%

ORIENTAL ENGINEERING CO. (BID ID -5531330)

DEY ENTERPRISE (BID ID -5537922)