SPL REPAIR TO BLDG NO P-63 AT JAK LI RC SRINAGAR

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified.

M & L for vitrified coloured light shade tiles 10mm thick ( square/rectangular) polished area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or colourer cement to match the tiles, over and incl 15mm thick screed bed or bedding layer of in cement mortar 1:6, complete all as specified and as directed.

Description all as above item No 3 but in vertical surface (skirting), over and incl 10mm thick rendering/ backing coat of in cement mortar 1:4, complete all as specified and as directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match, over and incl 15mm thick screed bed or bedding layer of in cement mortar 1:6, complete all as specified and as directed. complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 x250x7 mm or 450 x350 x7mm thick set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles, over and incl 10mm thick rendering/ backing coat of in cement mortar 1:4, complete all as specified and as directed. complete all as specified and as directed.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and directed .

M&L for Marble work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white type including demolition of stone slabs and tiles of any description or thickness in floors aprons ets laid bedded in any mortar complete all as specified and as directed.

M&L Providing edge moulding to18-20mm thick stone of countersvanities etc. including machinepolishing to edge to give highgloss finish etccomplete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6, type C-2, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A", complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggte) as in floors finishes even and smooth without using extra cement, complete all as specified and as directed.

M&L for sand filling 25mm thick for sand cushioning for laying of interlocking paver blocks under floors/path including watering and consolidation as required complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size withgrey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and incl sand filling 25mm thick for sand cushioning including watering and consolidation as required complete all as specified and as directed.

M&L for Preparing surface of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring, complete all as specified and as directed.

M&L for plain Cement concrete 1:5:10, type E2 (using 40 mm graded brick agg) as in filling of sunken portion complete all as specified and as directed.

M&L for PCC 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in suncken floor complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2 using 40 mm graded crushed stone aggregates in surface channels and drains, incl necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 to 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends complete all as specified and as directed.

Demolition of cement concrete in reinforced( reinforced cut as required to faciliitate demolition) roofs, floors beams ,stair cases,landings,chajjaas and similar suspended work complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC Type A1,1:½1:3 using (20 mm graded agg) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-290) quality A, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails.complete all as specified and as directed.

S&F for anodised aluminium snap grid frame work for false ceiling (Size of grid 605 x 605mm) complete all as specified and as directed.

S&F 8mm thick Non asbestos fibre cement building boards fixed or laid /inserted to timber/GI /Aluminium frame/flat iron frame work with screws complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F 20 mm thick soft wood eaves board with nails in any situation (except flooring and skirting) planed one side with butt joints complete all as specified and as directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M & L brickwork with subclass b bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1.4) complete all as specified and as directed.

Taking down cement plaster any description on brick or stone masonry walls incl racking out joint , hacking for key ,scrubbing down with water complete all as specified and as directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces ion cement mortar 1:4 finishing the surface even and smooth ( without using extra cement) in two layers with WPC complete all as specified and as directed. (Note : WPC paid separately )

M & L Rendering 15 mm thick on other than fair faces of brick work or concrete surfacesw in cement morar 1:6 finishing the surface even and smooth ( without using extra cement)complete all as specified and as directed.

M&L for Rendering 5mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of new plaster surface of wall and applying 3mm thick of wall putty, complete all as specified and as directed.

M&L for painting to new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats exterior emulsion over a coat of exterior primer, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L Preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) complete all as specified and as directed.

M&L for applying one coat of wall putty of minimum 2 mm thick over & above complete treated surface as item No.44 complete all as specified and directed.

M&L for applying two coats of oil bound distemper over item no 45 complete all as specified and directed.

M&L for applying two coat of exterior emulsion over a coat of chalk whitenin Finishing walls with Acrylic Smooth exteriorpaint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primerapplied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash, complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area n exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm and n. exc .4 .00 Sqm each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, in opening as per specification and drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing, complete all as specified and directed .

S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., incl provision of PCC 1:3:6 type C1 for back filling of chowkhat, fixing block for hold fast, complete all as specified and as directed.

S&F 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete, complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick factory made glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed .

M&L for Preparing old wood and wood based materials of any description and girth, not otherwise described and treated with one coats of synthetic enamel etc, complete all as specified and directed .

S&F factory made box type mild steel windows side hung glazed shutters with chowkets with glazing bars to receive glass and other side of the window wire mesh shutters to receive wire mesh or wire guage dovetailed or welded and steel peg stay with and including necessary welding , reveting, tower bolt, handle, hold fast & hinges, complete all as specified in Drg No CESZ/TD-1018/2011 sheet No 1/3 to 3/3. (Note: measurement of Guard bars shall be paid separately). Note: The quoted rate against the above item shall also include:- (i) For provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contract with bricks/concrete surface. (ii) 04 Nos MS steel Lugs of 20mmX5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs (iv) 0.36 mm dia SS wire mesh (v) 4 mm thick sheet glass- for window (vi) 4 mm thick figured glass- for ventilator (vii) 8mm square MS grills 100mm spacing center to centre

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over primed surfaces, complete all as specified and directed .

M&L for Preparation of old steel painted surfaces and applying one coats of synthetic enamel paint , complete all as specified and directed .

S&F Butt hinges medium weight cold rolled stainless steel 100 mm size, complete all as specified and directed .

S&F Butt hinges medium weight cold rolled stainless steel 75 mm size, complete all as specified and directed .

S&F extruded aluminium alloy D type handles,anodised of 75mm size ISI marked complete all as specified and directed. (Make: Clasic or equivalent)

S&F Aluminium handles, D type, anodized 150 mm long ISI Marked, complete all as specified and directed . (Make: Classic or equivalent)

S&F 150mm long aluminum anodised barrel tower bolts of extruded section ISI Marked, complete all as specified and directed (Make: Clasic or equivalent)

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long dia 16 mm complete.ISI Marked, complete all as specified and directed (Make: Classic)

S&F Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. ISI Marked,complete all as specified and directed (Make: Classic or equivalent)

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq.m in each pane, complete all as specified and directed .

S&F 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc,complete all as specified and directed .

M&L for Second class hard-wood clean swan in scantlings for frame chowkhat complete all as specified and directed .

S&F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed .

S & F Continuous (piano) hinges,30 mm width mild steel, bright finish or electrogalvanised complete all as specified and directed .

S&F Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws of 150 mm size complete all as specified and directed .

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 16 mm outer dia pipe of bore 3-layer PP-R Polypropylen random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylen random fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed .

S&F 20 mm outer dia pipe of bore 3-layer PP-R Polypropylen random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylen random fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed.

Dismantling existing water tank n exc 1000 ltr and removing from site including necessary connected accessories, complete all as specified and directed .

S&F Rotational moulded PVC water tanks (three layer) of 1000 Ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position including, complete all as specified and directed by Engr-in-charge

S&F in repairs 20 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm dia (min weight- 455 gms) complete all as specified and directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe including PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 40 mm bore waste coupling, complete all as specified and directed .

S&F in repair stainless steel plate rack (utensil rack) of size (900 mm x 600 mm) and with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/ bolts, complete all as specified and directed.

S&F in repairs vitreous china wash basin (Padestal pattern), white, flat back, size 600 x 480 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste coupling, complete all as specified and directed.

S&F in repair chromium plated fancy type mixer for mixing hot & cold water for WHB 15 mm dia screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated fancy type wall mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated fancy type Sink mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repair Low density PVC connection commercial quality 600mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.

S&F in repair for Soap dish, vitreous China white, approximate size 160x160x90mm, complete all as specified and directed.

S&F in repairs 15 mm dia CP shower rose, with or without swivel joints any size incl fixing to steel pipes or unions etc, complete all as specified and as directed.

S&F in repair 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed, complete all as specified and directed .

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and as directed.

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions , but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repair PTMT grating doom 125 mm dia with waste hole.(Min.weight 40gms), complete all as specified and directed .

S&F in repair Brass chromium plated tubular towel rail 20mm dia `D' type 60 cm long between flanges, complete all as specified and directed .

S&F in repair 25 mm dia Stainless Steel curtain rods including fixing arrangements, complete all as specified and directed .

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Taking up or down 100mm bore of CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe, complete all as specified and directed .

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor, complete all as specified and directed.

Description all as per item no.101 above but 75mm bore pipe, complete all as specified and directed .

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall, complete all as specified and directed.

Description all as per item No 103 above but 75mm bore pipe, complete all as specified and directed by Engr-in-charge.

S&F UPVC bends (any radius) of 110mm dia,complete all as specified and as directed.

S&F UPVC bends (any radius) of 75mm dia,complete all as specified and as directed.

S&F 110 mm dia UPVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc, complete all as specified and directed.

Description All as per item No 107 above but 75 mm dia bore,complete all as specified and as directed.

S&F UPVC traps 'P' or 'S' of 110mm dia,complete all as specified and as directed.

S&F UPVC cowls of 75mm dia,complete all as specified and as directed.

S&F UPVC cowls of 110mm dia,complete all as specified and as directed.

S&F in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed .

Taking down old and unserviceable submain wiring any size of two core including earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface complete all as specified and directed .

Taking down old and unserviceable copper/alumunium point wiring in batten/ conduit and make good the disturbed surface to match the existing surface, complete all as specified and directed .

Taking down old and unserviceable, distribution board any type including/ sheet metal enclosures, after removing all connection and make good the disturbed surface complete all as specified and directed .

M&L for Point wiring using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 1.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc for concealed conduit wiring with modular flush box metal of GI sheet minimum 1.8 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for One light/Fan point controlled by one switch 6 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete for one light/fan point controlled by one way switch,complete all as specified and directed . Note:- (a) wiring shall be done by using colour coding (b) Earth wire shall be of green colour.

Description All as item No 116 above One 3 pin socket outlet, 5 Amp socket outlet on same board with other switches,complete all as specified and directed .

Description All as per item No 116 above but One 5 pin socket outlet, 5 Amp socket outlet on independent board,complete all as specified and directed .

Description All as per item No 116 above but one light point controlled by two way switches, complete all as specified and directed .

Description As per item No 116 above but One bell / buzzer point controlled by one bell push on independent board,complete all as specified and directed.

S&F of Bell push,modular type (1 module) 5 Amps,complete all as specified and directed.

Supply and fixing of buzzer dingdong AC 230 Volts, single pole, 50 Hz complete all as specified and directed.

Supply and fixing Socket, 6A - 2/3 pin combined 2 module, fabio series 6 Amps 3 pin unversal socket with child safety shutter, Shrouded terminals compatible with all standard mobile chargers, ISI marked for the same board complete all as specified and directed.

Supply and fixing modular modular type (1 module) switch socket outlet 3 pin 5 amp flush type, ISI marked complete all as specified and directed.

M & L for one 3 pin 15 Amps socket outlet independent but below the switch board of light points in the same vertical plane, using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 2.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc for concealed conduit wiring with modular flush box metal of GI sheet minimum 1.2 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for power point controlled with cables, 2.5 sq. mm size, Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate, complete all as specified and directed . (2.5 Sqmm for Phase and neutral and 2.5 Sqmm for earthing)

Supply and fixing of modular socket 6A/16A - 2/3 pin combined 2 module,(Fabio classic white) shuttered socket (heavy duty) 3 pin unversal socket with child safety shutter, Shrouded terminals compatible 2 ton AC and 3.5KW geyser, ISI marked for the same board, complete all as specified and directed.

Supply and fixing of modular switch fabio classic white series/ switch fabio classic indicator, ISI marked, single pole, 16 Amps One Way switch, complete all as specified and directed .

Supply & Fixing of LED lights fitting 18W LED 6000K (4Ft),(Warm/ Warm White) 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed .

Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC (Warm/ White) decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size , complete all as specified and directed .

Supply and fixing angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 9 watt LED lamp, complete all as specified and directed.

Supply and fixing Modular switch 1 way 6A, 1 module modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked switch, complete all as specified and directed.

Supply and fixing Modular switch 2 way 6A, 1 module modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked switch, complete all as specified and directed.

Taking down existing unserviceable ceiling and exhaust fans with all connected items and deposited EM store yard and making good the disturbed surface on ceiling/fan hook and refixing on same position, complete all as specified and as directed.

Supply and fixing of ceiling fan modular regulator, 120 W- 2 module regulator electronic step type 230 volts single phase, complete all as per specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 complete all as specified and dorected .(Note: Old fan shall be deposited in MES store/ yard)

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076, complete all as specified and directed (Note: Old fan shall be deposited in MES store/ yard)

Supply and fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body type, complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast luminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

Supply and fixing in repair Sheet Metal enclosure double door for DBs when MCBs to be used SPN- 12 Way with 200 Amp rated bus bar, complete all as specified and directed.

Supply and fixing of amp rating 240V, 10KA, 'C'curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing repair amp rating 240V, 10KA, 'C'curve miniature circuit breaker (MCB) SP and current carrying capacity 5-32 Amps in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC conduit 20mm dia medium Grade concealed in walls/roof/floors including taking down the old submain wiring complete all as specified and directed. Notes:- (i) Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC conduit shall be measured as one unit.

Taking down old U/S geyser and Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece including old unserviceable geyser deposited to MES/EM store yard, complete all as specified and directed. (Make:-Bajal/Havells/CG)

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket, complete with one single pole MCB 20 Amps, 240 volts complete all as specified and directed.

M & L for GI pipe bracket made out of galvanised iron tubing 40 mm bore (dia), light grade, 1.20 Mtr long bent to shape as per specified for fixing street light fitting including suitable size of clamps and applying two coats of alluminium paint over a coat of aluminium primer including taking down old unserviceable GI pipe bracket with clamps, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, sewage pipe line, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out from any type of soil, including cutting of roots of trees, weeds, bushes, or any type of obstacles like chain link fencing, etc whille digging out for man holes pits , or digging for sewage pipe line trenches etc complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n.exc. 50 m depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

Supply and laying dry river sand laid in trenches as cable cushioning and covering complete all as secified and directed. Note : Punned thickness only measured and paid.

M & L for brick well brunt locally available sub class'B' laid over sand cushioning to cable in trenches keping width of brick parallel to the length of cable complete all as specified and directed.

Supply and laying in repair of XLPE insulated,sheathed,armoured,heavy duty LT 1100 volts grade cable 35 Sqmm 3.5 core with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle aluminium lugs, gland if required and jointed incl Taking down old unserviceable XLPE cable, complete all as specified and directed.

Supply and laying GI tube light grade size of 40 mm dia laid through trenches/under road floor for cable protection complete all as specified and directed.

Disconnecting electric supply from meters and dismantling MS electric meter box of any type/ size including electric meters, switch gear, MCCB/MCBs etc complete and supply fabricate, testing and commissioning of MS sheet electric meter box 2 mm thick double door with locking arrangement of size/ dimention not less than 130 x 75 x 30 cm with suitable thickness of hylem sheet for fixing existing electric meter 06 Nos, including provision of new MCCB 100 Amp -01 No, MCB SPN 32 Amp-07 Nos with suitable size of aluminium busbar for phase & neutral and see through glass 08 connnecting internally prewired copper conductor with electric meter connection of required size and applied with powder coated synthetic enameled paint and making good to the distrubed wall surface complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised strip 32 x 6 mmthick by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 3 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber including demolish existing earth pit taking out old materials, complete all as specified and directed.

Taking out/taking down old unserviceable damaged GI/PPR pipe of following sizes from excavated trenches including removing of fittings all as directed for necessary replacement /relaying serviceable GI pipe complete all as specified and directed. size of

(a) 40/50 mm dia

(b) 20 / 25 mm dia

Supply and Laying of PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches including fittings and testing, complete all as specified and directed. Size of

(a) 32/40 mm dia.

(b) 25 mm dia.

(c) 20 mm dia.

M&L Lagging on pipes of internal dia 15 mm, used in external water supply or plumbing all round with, 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauze 20 mm mesh and finally covering with plaster of pairs including taking down old, complete all as specified and directed, for the size of

(a) 40 mm bore tubing.

(b) 25 mm bore tubing.

(c) 20 mm bore tubing.

Taking out unserviceable Gate valves from water pipe line for necessary replacement for valve size 20 mm to 40 mm, complete all as specified and directed.

Supply and fixing PPR gate valve (brass insert) of size 40 mm dia including connection and testing complete all as specified and directed.

Supply and fixing PPR gate valve (brass insert) of size 25 mm dia including connection and testing complete all as specified and directed.

Supply and fixing PPR gate valve (brass insert) of size 20 mm dia including connection and testing complete all as specified and directed.

S&F GI Flat strip clamps of size 25mm x 3mm duly bended as per the size of GI tubing and site condition,drilled complete all as specified and directed.

Supply and fixing of heavy rust proof passivated bolts made of steel of size 8 mm dia 75 mm long including necessary drilling on wall for fixing of steel frame, complete all as specified and directed.

M & L for cutting the existing GI/PPR pipe and making connection of PPR distribution branch with PPR main of sizes 40 mm to 75 mm by providing and fixing tee including cutting and making fusion joint etc, complete all as specified and directed.

M/S MOHAMMAD YOUSUF RATHER

M/S Thakur & Sons

M/S LATIF AHMAD BABA CONSTRUCTION

M/s Bashir Enterprises

M/S Manzoor and Co