Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹13.3 LAccepted-AOC | ₹13.3 L | L-1 | Accepted-AOC L-1 Bidder |
| 2 | L-2₹13.9 L+₹65,221 (4.92%)Rejected-Finance | ₹13.9 L+₹65,221 (4.92%) | L-2 | Rejected-Finance 2nd lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical Techno-commercially Non-responsive |
| 4 | Rejected-Technical | - | - | Rejected-Technical Techno-commercially Non-responsive |
| 5 | Rejected-Technical | - | - | Rejected-Technical Techno-commercially Non-responsive |
| Sl No | Description | Qty | Unit | Mrs. Kh. Sadananda Singh L2 | M/S A. K. IBOYAIMA MEETEI L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (4.1.4) 1:2.4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm normal size). | 12.15 | Cum | 11,907 ₹1,44,670.05 | 11,350 ₹1,37,902.5 Lowest |
| 2.00 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand). | 57.84 | Sqm | 343 ₹19,839.12 | 327 ₹18,913.68 Lowest |
| 3.00 | Repairing to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints & preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. 14.1.1) With cement mortar 1:4 (1 cement : 4 fine sand). | 213.55 | Sqm | 515 ₹1,09,978.25 | 490 ₹1,04,639.5 Lowest |
| 4.00 | Neat cement punning. | 14.8 | Sqm | 77 ₹1,139.6 | 73 ₹1,080.4 Lowest |
| 5.00 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.13.63.3 with water thinnable cement primer on wall surface having VOC less than 50grams /litres. | 256.58 | Sqm | 78 ₹20,013.24 | 74 ₹18,986.92 Lowest |
| 6.00 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work. | 281.21 | Sqm | 205 ₹57,648.05 | 195 ₹54,835.95 Lowest |
| 7.00 | Finishing walls with Acrylic Smooth exterior paint of required shade:— New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). | 436.13 | Sqm | 200 ₹87,226 | 191 ₹83,300.83 Lowest |
| 8.00 | Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self-drilling itself tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with: 12.46.2 Pre-coated galvanised iron profilo sheets 0.40 mm thick. | 321.86 | Sqm | 721 ₹2,32,061.06 | 687 ₹2,21,117.82 Lowest |
| 9.00 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25xO.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.l. channels 45x15xO.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to Gil. intermediate channel with connecting clips made out of 2.64mm diax230mm long C.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed. all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with •12.41.2 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I. | 44 | Sqm | 1,730 ₹76,120 | 1,649 ₹72,556 Lowest |
| 10.00 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. | 459.14 | Sqm | 96 ₹44,077.44 | 92 ₹42,240.88 Lowest |
Tender Value
₹13.0 L
EMD Value
₹26,000
Closing Date
5 Aug 2026, 5:00 pmClosed
GSM (E and C), Contracts Division
Office of the GSM (E and C), Contracts Division, NHPC Limited, Loktak Power Station, PO-Loktak, Komkeirap, Distt-Churachandpur, Manipur-795124
Repair and Painting work of Bal Vidya Mandir situated at new Colony of Loktak Power Station.
2026_NHPC_917405_1
NH-LPS-CDIV/70/2026-CIVIL/1119
Open Tender
Civil Works
Works
60 days
NHPC Ltd., Loktak Project
Please refer Tender documents.
6 documents required · 6 mandatory
₹590
NHPC Ltd.
₹26,000
Yes
16 Sept 2026
15 Jul 2026
10 Aug 2026
15 Jul 2026
5 Aug 2026
15 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (4.1.4) 1:2.4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm normal size). | 12.15 | Cum | - | - |
| 2 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand). | 57.84 | Sqm | - | - |
| 3 | Repairing to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints & preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. 14.1.1) With cement mortar 1:4 (1 cement : 4 fine sand). | 213.55 | Sqm | - | - |
| 4 | Neat cement punning. | 14.8 | Sqm | - | - |
| 5 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.13.63.3 with water thinnable cement primer on wall surface having VOC less than 50grams /litres. | 256.58 | Sqm | - | - |
| 6 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work. | 281.21 | Sqm | - | - |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade:— New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). | 436.13 | Sqm | - | - |
| 8 | Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self-drilling itself tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with: 12.46.2 Pre-coated galvanised iron profilo sheets 0.40 mm thick. | 321.86 | Sqm | - | - |
| 9 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25xO.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.l. channels 45x15xO.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to Gil. intermediate channel with connecting clips made out of 2.64mm diax230mm long C.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed. all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with •12.41.2 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I. | 44 | Sqm | - | - |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. | 459.14 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 9.67 MB
tenderdocument.pdf
Tender Documents • 8.11 MB
BOQ_964152.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .