SPECIAL REPAIR TO BLDG NO P-61 (AIR FORCE SCHOOL) AT SITE R AND CERTAIN LBW AND REVENUE WORKS AT SITE R AF STN UNDER GE AF THANE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft or loose soil ,complete all as specified and directed by Engr-in-charge.

Excavation in trenches, n exc 1.5 mtr wide and n,exc 1.5 mtr in depth; for foundation etc. or for shafts, wells cesspit, manholes, pier holes,etc n,exc 10 Sqm on plan and n exc 1.5mtr in depth and getting out in hard /dense soil ,complete all as specified and directed by Engr-in-charge.

Excavation in trenches, n exc 1.5 mtr wide and n,exc 1.5 mtr in depth; for foundation etc. or for shafts, wells cesspit, manholes, pier holes,etc n,exc 10 Sqm on plan and n exc 1.5mtr in depth and getting out in Soft /disintegrated rock ,complete all as specified and directed by Engr-in-charge.

M&L for Hardcore of broken stone or boulders gauge n exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface in under floor or plinth protection ,complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate )as lean concrete in foundation filling ,complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in floor sub base/ramp etc finished even and fair ,complete all as specified and directed by Engr-in-charge.

M&L for 100mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in plinth protection and manhole etc finished even and fair ,complete all as specified and directed by Engr-in-charge.

M&L for Cement concrete 1:2:4 Type B2 (using 40mm graded stone aggregate) as in foundation and mass concrete etc.,complete all as specified and directed by Engr-in-charge

M&L for walling precast cement concrete block masonary with solid blocks exc 10 cm in width in 1:3:6 type C1 20mm graded aggregate set in cement morter 1:6 etc ,complete all as specified and directed by Engr-in-charge

S&F Steel work in tubular (round/rectangular/square shape of pipes as approved by Engr-in-Charge) complete etc using ERW or induction butt weld M.S tube black conforming to IS 1161-1979 grade Yst 240 as in purlin, rafter, pole including fabrication and election ,complete all as specified and directed by Engr-in-charge.

S&F Steel work in tubular trusses (round/rectangular/square shape of pipes as approved by Engr-in-Charge) complete etc using ERW or induction butt weld M.S tube black conforming to IS 1161-1979 grade Yst 240 as in purlin, rafter, pole including special shaped, washers, fabrication and errection complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified ,complete all as specified and directed by Engr-in-charge

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and directed by Engr-in-charge

S&F for framed work as in plates (plain or chequred) channels, square cut or notched with fabrication and erection of FE 410-W (Gde E-250) auality A (ordinary and counter sunk) forming holes without any attachment ,complete all as specified and directed by Engr-in-charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut Exc 5 cm but n.exc 10 cm long ,complete all as specified and directed by Engr-in-charge.

M&Lfor form work to side of concrete foundation, footings base of column, plinth beam and similar work ,vertical or to batter Rough finished surface of concrete flat etc ,complete all as specified and directed by Engr-in-charge.

M&L for Formwork to sides of pillars, posts, structs, piers, columns and stanchions. Rough finished surface of concrete Square, rectangular or polygonal ,complete all as specified and directed by engr-in-charge.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm th (Horizontal or sloping) Rough finished surface of concrete flat ,complete all as specified and directed by Engr-in-charge.

M&L form work to side and soffit of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelvves incl support, overhangs etc complete all as specified and directed by Engr-in-charge

M&L RCC M-30 Design mix as in foundations including rafts, footings foundation beam, plinth beam etc complete all as specified and directed by Engr-in-Charge.

M&L RCC M-30 Design mix as in Columns, pillars, piers posts and struts etc complete all as specified and directed by Engr-in-Charge.

M&L RCC M-30 Design mix as in roof beams, cantilevers, bressummers, lintels over 1.5m span etc, complete all as specified and directed by Engr-in-Charge.

M&L RCC M-30 Design mix as in Slab supported on walls, shelves and like etc ,complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,quality confirming to TMT bars ,complete all as specified and directed by Engr-in-Charge.

M&L for TMT bar 5mm dia and over upto and including 10mm dia in stirrups, cut to length band to shape required incl cranking bending, spirally for hooping for columns hooking ends and binding with MS wire 0.9mm dia or securing with clips for spacer and binder and in stirrips quality confirming to TMT bars ,complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick on CM (1:3) on concrete roof top and chajjas surface finished even and smooth to get uniform level surface for laying of membrane treatement,with using water proofing compound , complete all as specified and directed by Engr-in-charge.

Material and labour for water proofing treatment with APP based standard membrane minimum 3mm thick over PCC padding in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane minimum 3mm thick, polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer complete all as specified.

M&L Non - skid Ceramic colour tiles 7 to 8 mm thick,double charged (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) etc, complete all as specified and directed by Engr-in-charge.

M&L Non - skid Ceramic colour tiles 7 to 8 mm thick ,double charged ,(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM (1:3) etc , complete all as specified and directed by Engr-in-charge.

S&F for 35mm thick Iind class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkhats , complete all as specified and directed by Engr-in-charge.

S&F for 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pan , complete all as specified and directed by Engr-in-charge.

S&F Butt hinge 100mm long ,cold rolled mild steel ,medium weight ,complete all as specified and directed by Engr-in-charge.

S&F 1st class hardwood with and including Small fittings such as brackets of any type, latch and hinge blocks,shaped door and window stops/door stopper and the like including all necessary labours ; articles n exc 200 cu.cm each and 50mm long butt hinges ,medium weight ,complete all as specified and directed by Engr-in-charge.

S&F aluminium alloy, anodised sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ,complete all as specified and directed by Engr-in-charge.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises ,complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) ,complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc ,complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames)

Taking down door Chowkhat alongwith shutters Exc 1.5 sqm but not exc 4 sqm each ,complete all as specified and directed by Engr-in-charge.

M&L 75mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in plinth protection / floor and manhole etc finished even and fair ,complete all as specified and directed by Engr-in-charge.

M&L for Chequered cement concrete tiles 20cm x 20cmx 25mm thick,set,jointed and pointed in neat cement slurry in floor finish with grey cement & pigment with glossy finish over 15mm thick screed bed in CM 1:4 for receiving floor finished ,complete all as specified and directed by Engr-in-charge..

S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing , complete all as specified and directed by Engr-in-charge.

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engr-in-charge.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and directed by Engr-in-charge.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated , complete all as specified and directed by Engr-in-charge.

M&L powder coated aluminium Door/ window/ sliding window / Ventilator / partition frames and shutters using standard aluminium powder coated sections including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fittings suitable Nylon gasket, nylon rollers, maruthi locks, handles, concealed star lock, aluminium F channel for fixing aluminium grill and all necessary fittings and fixtures etc all as specified etc complete of standard sections and fixing to cudappa stone/granite stone with necessary bolts/screws , complete all as specified and directed by Engr-in-charge.

S&F Powder coated aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame work , complete all as specified and directed by Engr-in-charge.

S & F Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, with stainless stell cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area, complete all as specified as directed by Engineer -in -charge.

M&L for 4 mm thick sheet Glass ordinary quality and glazing in square exc 0.5 sqm in each pane , compete all as specified as directed by Engineer -in -charge.

M&L for 4 mm thick sheet glass ordinary quality and glazing in square n. exc 0.5 sqm in each pane , complete all as specified as directed by Engineer -in -charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as specified as directed by Engineer -in -charge.

S&F aluminium anodized barrel tower bolt 200mm long extruded section ,complete all as specified as directed by Engineer -in -charge

S&F extruded aluminium alloy handles 150mm fabricated type, anodised ,complete all as specified as directed by Engineer -in -charge

M&L for Machine cut cudappa stone slab 20-25mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge.

M&L for Machine cut cudappa stone slab 30-40mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge.

M&L for black granite 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and directed by Engr-in-charge.

M&L for rounding to edges of stone slabs one edge , such as in steps, cooking platform, and other similar situations , complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick in cm 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement.

M&L for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface with neeru etc , complete all as specified and directed by Engr-in-charge.

M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) ,complete all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound , complete all as specified and directed by Engr-in-charge.

S&F,in repair, 25 mm matt finish Stainless steel curtain rod best quality as approved by Engr-in-charge , complete all as specified and directed by Engr-in-charge.

S&F,in repair, Stainless steel socket bracket with bore of 25mm for dead end of curtain rod , complete all as specified and directed by Engr-in-charge.

S&F,in repair, Stainless steel ornamental piece with bore dia of 25 mm for free end of curtain rod , complete all as specified and directed by Engr-in-charge.

S&F,in repair, Stainless steel projecting bracket to support curtain rod of size 25mm , complete all as specified and directed by Engr-in-charge.

S&F,in repair, Vitreous China WC (Pedestal pattern white) including fixing bolts with PVC flushing cistern of 10 ltr capacity, seat cover black closed pattern with flat bottom, and mild steel chromium plated and flush pipe PVC 32mm dis for low level cistern,complete all as specified and directed by Engr-in-charge.

S&F Vitreous China WC (squatting pan) Orissa pattern size 580x440mm white with intergal foot rests including provision of lime concrete bedding, fixing bolts with PVC flushing cistern L/L of 10 ltr capacity with intel ball valve, float and handle including brackets, flush pipe PVC 32mm dis for low level cistern , complete all as specified and directed by Engr-in-charge.

S&F Vitreous china Basin white of size 550 x 400mm including fancy type pillar tab 15mm dia chromimum plated, waste coupling 32mm bore of PTMT and plug and proclained stopper including brackeets and 32mm dia PVC flush pipe etc ,complete all as specified and directed by Engr-in-charge.

S&F ,in repairs, vitreous china bowl urinal flat back, size of 465mmx355mmx265mm (minimum) white with grating and union for discharge pipe including 32mm GI waste pipe. Complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement, fixing with brackets, flush pipe, greating and union for discharge pipe , complete all as specified and directed by Engr-in-charge.

S&F ,in repairs,quarter turn bib tap 15 mm dia chromium plated cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe , complete all as specified and directed by Engr-in-charge.

S&F ,in repairs, quarter turn stop cock valves 15 mm cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unious , complete all as specified and directed by Engr-in-charge.

S&F ,in repairs, quarter turn stop cock valves 20 mm cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unious , complete all as specified and directed by Engr-in-charge.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 15mm bore of pipe , complete all as specified and directed by Engr-in-charge.(Note: Old Serviciable Steel tubing retrived from this item shall be used against relevent item of Sch A).

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 20mm bore of pipe , complete all as specified and directed by Engr-in-charge.(Note: Old Serviciable Steel tubing retrived from this item shall be used against relevent item of Sch A).

M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and directed by Engr-in-charge.

Refixing old serviciable GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) for 15 mm bore of pipe , complete all as specified and directed by Engr-in-charge.

M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and directed by Engr-in-charge.

Refixing old serviciable GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) 20 mm , complete all as specified and directed by Engr-in-charge.

S&F 32mm high density polyethylene pipe (HDPE) of pressure rating 6 kg/cu cm fixed to walls ceiling or in floor , complete all as specified and directed by Engr-in-charge.

S&F ,in repair, PVC connectors 15mm bore 600mm long with brass connections & washers , complete all as specified and directed by Engr-in-charge.

S&F 100 mm cast iron Nahani trap with grating fixed in position ,complete all as specified and directed by Engr-in-charge.

S&F ,in repair, Grating of 100 mm dia of PTMT (Minimum weight 25gms) fixed in position ,complete all as specified and directed by Engr-in-charge.

S&F Stainless steel set of six peg hooks ,complete all as specified and directed by Engr-in-charge.

S&F for stainless steel tubular towel rail 20mm dia 'D' type 60cm long between flanges,complete all as specified and directed by Engr-in-charge.

S&F stainless steel soap dish including all fixtures and fasteners for fixing to the wall etc ,complete all as specified and directed by Engr-in-charge.

S&F ,in repairs, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm , complete all as specified and directed by Engr-in-charge.

Dismantling of 100 mm internal dia cast iron /PVC or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches,complete all as specified and directed by Engr-in-charge.

Dismantling of 75 mm internal dia cast iron /PVC or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with ruber ring joints fixed to wall or lead in floor ,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with ruber ring joints fixed to wall ,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends 110mm bore of any radius with access door ,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bend 75mm bore of any redious with access door ,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) floor trap of 75mm diameter out let , plain with grating including jointing to waste pipe with solvent cement ,complete all as specified and directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as spcd.

M & L preparation of plastered or unplastered new surfaces of walls and applying two coat of distemper on Walls over a coat of alkali resistant priming paint complete all as specified.

M & L preparation of plastered or unplastered new surfaces of ceilings and applying two coat of oil bound distemper over a coat of alkali resistant priming paint ,complete all as specified and directed by Engr-in-charge.

M&L for Preparing new plastered surfaces of wall and applying two coats of acrylic weather coat exterior paint over a coat of weather coat primer ,complete all as specified and directed by Engr-in-charge.

M&L for preparation of plastered or un-plastered old surface on wall including washing,rubbing down and stopping of distempered and painted surfaces and applying two coat of OBD over a coat of alkali resistant primer ,complete all as specified and directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old surfaces on ceiling and apply one coat of OBD ,complete all as specified and directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on wall ,complete all as specified and directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on ceiling ,complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment on surface of wall etc in any position including washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi,algal, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer ,complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed by Engr-in-charge.

M&L for preparation of new Steel surfaces of any description over 10cm width of girth and applying two coats of synthetic enamel paint over coat of red oxide primer ,complete all as specified and directed by Engr-in-charge.

M&L for Medium density fibre board 18mm , exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and directed by Engr-in-charge.

M&L for Medium density fibre board 12mm exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and directed by Engr-in-charge.

S&F magnetic catches of mild steel body and striking plate with aproved quality ,complete all as specified and directed by Engr-in-charge.

S&F ,in repair ,continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm ,complete all as specified and directed by Engr-in-charge.

S&F Aluminium handle 100mm long ,cast type, anodised ,complete all as specified and directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolt 100mm long, extruded section and fixed ,complete all as specified and directed by Engr-in-charge.

M&L for second class hardwood plain fillets.Square,rectangular or triangular in section, clean sawn, secured with nails or brads Not exc 3 Sq .cm.

M&L for second class hardwood plain fillets.Square,rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 3 Sq .cm. but n exc 6 Sq cm ,complete all as specified and directed by Engr-in-charge.

S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board ,complete all as specified and directed by Engr-in-charge.

M&L for 40mm thick Damp proof course to horizontal or vertical surfaces, in cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate, including necessary form work and water proofing compound ,complete all as specified and directed by Engr-in-charge. (Note : water proofing compound shall be paid seperately under relevent item of Sch A)

Returning, filling in including spreading, levelling watering and well ramming in leyers n.exc 25cm each layer in soil all as specified

M&L for Earth filling under floor obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick layer ,complete all as specified and directed by Engr-in-charge.

Removing surplus soil n.exc 50 mtr away deposited where directed n.exc 1.50 mtr high from the starting point all as specified ,complete all as specified and directed by Engr-in-charge.

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge.Note: Rate for making good surface shall be deemed to be included in quoted rate.

M & L for Point wiring with 1.5 Sq mm copper conductor single core flame retardant PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC rigid concieled conduit and its accessories of suitable size, medium grade ISI marked surface on walls /roof and MS pressed steel terminal boxes of 1.6 mm thick of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement incl provision of 3 mm thick bakelite hylem sheet for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for:

One light point controlled by one, one way switch 5 Amps

One ceiling / Exhaust fan point controlled by one switch

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

One 3 pin 5 Amps socket out let on same board.

Ditto as per Srl Item No 121.00 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 6/16 amps switch socket cobmination point incl running of 1.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly ,complete all as specified and directed by Engr-in-charge.

S & F switch piano single pole flush type 5 amps, 230 volts ,complete all as specified and directed by Engr-in-charge.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm ,complete all as specified and directed by Engr-in-charge.

S & F socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts ,complete all as specified and directed by Engr-in-charge.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 6/16 amps flush type ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, fan regulator Electronics step type 120 watts and connecting ,complete all as specified and directed by Engr-in-charge.

M & L for Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC rigid conduit heavy duty ISI marked and its accessories including one run of single core 1.5 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board ,complete all as specified and directed by Engr-in-charge.

S&F,in repair,ceiling fans 1200 mm sweep, 230 V, 50 Hz and accessories including hanging arrangement with hole fastener ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, exhaust fan of 230 mm sweep ,AC single phase 23/240 Volt with louvers, including cutting wall in required shape and size for circular opening (hole) and after fixing the exhaust fan, the wall surface shall be made with existing surface by PCC/plastering and painting complete all as specified and directed by Engr-in-Charge.

S&F,in repair, LED Pluto NEO Panel 2x2, 34/36 Watt environmental frindly, new generation aesthetically design, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Amstrong/Grid ceilling all in one fixture and removal old existing unserviciable tube from fitting ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, batten integrated LED fitting 18 watt with integral sleek extruded polycarbonate LED channel with white acrylic covert, 4 feet light fitting with provision of flexible two core copper conductor 23/0.0076 up to 1.5 Mtrs from ceiling rose to fitting ,complete all as specified and directed by Engr-in-charge.

Supply, fixing and testing LED bulding security light fitting of 30 Watt including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD (I) less than 10%, cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 66 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report. Make: Crompton ,Havells, philips, C&S, Bajaj, helonix, Wipro

S & F Loadline Distribution board, TP&N vertical ,with Bus bars,Netural links,blanking plates , double door 4 way, with MCCB 63 to 100 Amps as incommer and SP/DP/TP MCB as outgoing and electrically connecting up ,complete all as specified and directed by Engr-in-charge.

S & F Distribution board, SP&N ,Prewired ,Netural links,blanking plates ,double door 4 way, with provision for MCB SP&N as incommer and SP/DP MCB as outgoing and electrically connecting up ,complete all as specified and directed by Engr-in-charge.

S & F MCB SP 6 to 32 Amps 240 volts 50 HZ , with breaking capacity 10 KA ,complete all as specified and directed by Engr-in-charge.

S&F MCB SPN 20 to 40 Amps 240 volts 50 HZ , with breaking capacity 10 KA ,complete all as specified and directed by Engr-in-charge.

S & F MCB TPN 415 volts 63 Amps with breaking capacity 16 KA ,complete all as specified and directed by Engr-in-charge.

Supply and Laying LT UG cable of size 2 core 16 Sqmm laid in trenches /floors/on wall /service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal /cable gland as per site requirement including connecting to the main switches /cut outs MCB/MCCB with necessary lugs after cutting to required length and also including removing the existing unsv cable ,complete all as specified and directed by Engr-in-charge.

Supply and Laying LT UG cable of size 3½ core 35 Sqmm laid in trenches /floors/on wall /service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal /cable gland as per site requirement including connecting to the main switches /cut outs MCB/MCCB with necessary lugs after cutting to required length and also including removing the existing unsv cable ,complete all as specified and directed by Engr-in-charge.

Excavation in trenches n-exc 1.5 m deep and n.exc 1.5m wide and getting out in soft/lose soil ,complete all as specified and directed by Engr-in-charge.

Supply & laying unreinforced precast concrete cable covers class LV type 1 flat of size 250 mmx150 mm x40mm ,complete all as specified and directed by Engr-in-charge.

Supply and spread in trenches crushed stone/ dry river sand for cable cusionining & gently punning down with hand in layers ,complete all as specified and directed by Engr-in-charge.

Supply & lay GI tubing of size 40 mm dia bore, light grade for cable protection at road crossing /hard standing/pole ,protection fixed with clamps as per site requirement etc ,complete all as specified and directed by Engr-in-charge.

M&L for Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15 mm buried directly in ground (earthpit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to copper earth strip of size 20X3mm as earthing lead by means of GI bolts, nuts, washers, and connected to other end to main board duly protected by 15 mm bore GI light grade pipe from earth plate. Earth plate shall be surrounded by packed layer of coal dust 300mm and common salt 15 cm thick all around bottom and top. Watering pipe 20 mm bore of GI medium grade pipe and including funnel, wire mesh, CI cover & frame, PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 5 of SSR Part – I including testing. Note : (i) PCC/HDPE chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii). Earth resistance of earth pit should be less than 1 Ohms. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of Copper plate. (iv) Soil resistance test if required shall be the responsbility of contractor without any extra cost.(v) 7.5 RM Copper strip of size 20X3mm in deemed to be included in quoted rates.

Jay Jyotirling construction co.

S K ENTERPRISES

M/S KHUSHI ENTERPRISES

Atharva Enterprises

Parmatma Enterprises