WBPWD/AE/KMCESD/NIQ-09/26-27

Dismantling the existing Fire detectors, MCP,Hooters wirings etc. safely without damaging and deposit the same in the same in the sectional store for the whole renovated portion as per direction of EIC.

Supply & Laying of 2 Core 1.5 aq.mm. FRLS shielded copper Cable (For Loop) (Make. Finolex/Gloster/ RR Kable/Polycab/KEI/Gloster) through 19 mm dia PVC 'FR' type Rigid Conduit pipe with necessary arrangement as per G.S. (Make : Precision/ AKG/ Universal/ Polycab) on the surface of the wall.

Supply,Installation,Testing & Commissioning of Micropresssor controlled Addressable multisensor detector IP 42 ( VDS approved) with inbuilt optical smoke sensors and heat detector sensor with inbuilt short circuit fault isolator as per NFPA style 7 wiring complete with base [Note : Detectors without built-in-fault isolator is also acceptable provided one independant short circuit fault isolator per detector is to be provided extra without extra cost) the detectors should have built in response indicator with LED indicator. The detector should have 360 degree optical view with single / multiple LED that blinks on actuation of detector. Reverse polarity or faulty zone wiring shall not damage the detectors. (Approved Make : Siemens / Honeywell- Notifier/ Bosch) The new devices should be matched with the existing addressable Fire panel (make-- Seimens)

Refixing the existing Detectors at suitable location incl. checking ,testing.

Fixing only Existing Addressable Manual call point soft addressable type with in built fault isolator .

Fixing only Existing Hooter after checking incl. necessary connection.

Supply, Installation,Testing & Commisioning of Addressable Manual Call Point ( VDS approved ) with in built short circuit fault isolator as per NFPA style 7 wiring complete as required. (Approved Make : Siemens / Honeywell- Notifier/ Bosch) The new devices should be matched with the existing 2/4/6 loop addressable Fire panel (make-- Seimens)

Supply, Installation, Testing & Commissioning of IP Addressable Loop Powered Hooter ( sound output of minimum 90 db ) cum strobe (strength of light 10 cd)complete with inbuilt short circuit fault isolator. Degree of protection IP65 ( VDS approved) approved. (Approved Make : Siemens / Honeywell- Notifier/ Bosch) The new devices should be matched with the existing 2/4/6 loop addressable Fire panel (make-- Seimens)

Supply, Installation, Testing & Commissioning of Addressable Monitor Modules & Transponder with necessary relay module (VDS approved) for monitoring Flow switches / Fire exit doors / AHU/ Lift etc. with inbuilt short circuit fault isolator and minimum (04) four potential free contact with adjustable setting parameter likes of Input or output, complete in single or multiple housing with degree of protection IP 42 with flash LED indicator that conforms module is operational and integrated buzzer signaling maintenance alarm, complete as required. (Approved Make : Siemens / Honeywell- Notifier/ Bosch) The new devices should be matched with the existing 2/4/6 loop addressable Fire panel (make-- Seimens)

Supplying, installation, testing and commissioning of LED type Response Indicator ( VDS approved) having 2 Nos. red coloured LED lamps including connections etc. (Approved Make : Siemens / Honeywell- Notifier/ Bosch) The new devices should be matched with the existing 2/4/6 loop addressable Fire panel (make-- Seimens)