Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC | ₹4.1 L | L1 | Accepted-AOC Meet all the criteria |
| 2 | Rejected-Technical | - | - | Rejected-Technical Not Meet all the Creteria |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
7 Feb 2024, 3:00 pmClosed
Executive Officer
Pennathur Town Panchayat office Vellore District
Rejuvenation of Toilet Civil Works Electrical Works and Water Supply Works ward No 5 Sapthilipuram Pillayar Koil street Community Toilet in Pennathur Town Panchayat
2024_DTP_416389_1
Pennathur/15thFin2324/toilet
Open Tender
Civil Works - Buildings
180 days
Pennathur Town Panchayat office
Class IV and above
2 documents required · 2 mandatory
₹0
₹5,000
Yes
5 Mar 2024
1 Feb 2024
7 Feb 2024
1 Feb 2024
7 Feb 2024
1 Feb 2024
1 Feb 2024 - 7 Feb 2024
Amount
Toilet
Painting the new walls two coats over one coat of priming with best Weather Proof Exterior Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers (S.l.No.359-A)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch coveredwith hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TCwire for open PVC light point / fan point (for electronic regulator)sd - 20
Supply and fixing of LED bulk 15 watts head fitting including all cost and conveyance etc., complete ( ANNEXURE-VII 15 J )
18W LED Tube Light for T8 Fitting (Single Side) light fitting including all cost and conveyance etc., complete( ANNEXURE-VII 15 g )
Supply and fixing of Street light fitting 120 watts including all cost and conveyance etc., complete
Supply and fixing PVC ITEMS FINOLEX (OR) EQUIVALENT(WITH ISI MONOGRAM) including all cost and conveyance etc., complete
25mm dia P v C Pipe
32 mm P V C Pipe
CP Angle Cock Tap
Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.
Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH
Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M50 grade 80mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid