AMP of NH-42 to Ram Badmal road for the year 25-26

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness etc. complete as per specification and direction of the Engineering in charge.

Flank dressing to proper grade & camber on both side berms including T&P materials etc. complete as per direction of the Engineer in charge.

Earth work in excavation of foundation in all kinds of soil including dressing and leveling the bed and depositing the soil within 50M initial lead and 1.5m intial lift. including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer – in – Charge.

Providing laying spreding & compacting graded stone aggregate to wet mix macacam specificationincluding pre mixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, layng in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibrator roller to achieve th desired compaction as per clause 406 of MoSRT&H specifications for road and bridge works.

Cleaning existing granular surface including removal of foreign materials with wire brushes and small picks, seeeping with brooms or soft brushes and finally dustong with old gunny bags and / or compressed air to receive bituminous treatment etc complete asper direction of Engineer charge.

Clearing existing black topped surface including removal of foreign materials with wire brushes and small picks, seeeping with brooms or soft brushes and finally dustong with old gunny bags and / or compressed air to receive bituminous treatment etc complete asper direction of Engineer charge.

Providing applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.40kg/sqm using mechanical means as per technical specification clause 502 of MORD forlow porosity surface and as per the direction of the Engineer in charge.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing and layign bituminous macadam with batch type hot mix plant using crushed aggregates of apecified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting to site laid over a previously prepared surface with Hydrostatic Paver finisher with sensor control to the required gfrade level and alignment and rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per clause 507 MoSRT&H specification etc complete as per specification and direction of Engineer in charge.

Conveying from stacks and spreading moorum on road surface to proper thickness and camber for topping including cost and carriage ofmaterials etc complete asper direction ofEngineer in charge.

Maintenance of Hume pipe culvert by way of clearing cleaning erosion repair repairs to cracks parapet wall and protection work as per drawing and technical specification clause 1908 etc complete asper direction of Engineer in charge

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scrapping etc as per MORD technical specifiction clause 1915 as per direction of the Engineer in charge.

Reinforced cement concrete M15 grade kilometer stone/ local stone of standard design as per IRC:8 fixing in position including painting and printing etc as epr drawing an technical specification clause 1703 of MORD etc complete asper direction of Engineer in charge.

Providing fixing 200 mtr stone as per approved drawing and specification including cost of all materials T&P labour painting figuring and fixing etc complete asper direction of Engineer in charge.