Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.0 Craccepted-finance | ₹4.0 Cr | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹6.3 L
Closing Date
12 Dec 2025, 10:30 pmClosed
Rajya Vokkaligara Sangha
Mr Gangadhar Y J
PROPOSED CONSTRUCTION OF ADDITIONAL FLOORS(SECOND AND THIRD FLOOR) RVS FREE HOSTEL FOR GIRLS AT MELEKOTE, TUMAKURU
RVS/2025-26/BD/WORK_INDENT10/CALL-2
RVS/2025-26/BD/WORK_INDENT10/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
Rajya Vokkaligara Sangha Bengaluru
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Bidder should have satisfactorily completed at least one similar work such as construction of Building of value not less than 50 Percent of the amount put to tender during the preceding 5 years from 2019-20 to 2023-24 .work done certificate should be obtained from Government& Recognized Private authority.The necessary work done certificate issued by an officer not below the rank of Executive Engineer for the government works and competent authority from private firms
The bidder shall executed the following minimum quantities of work in any one year during the last 5 years(2019-20 to 2023-24). Cement concrete (includingRCC ) -355.00 cum, Block works / Aerated blocks -1099.00.00 sqm, All types of plastering -5424.00.00 sqm., All type of flooring works -1480.00sqm., TMT / Structural steel works -46.5.00 Tonne, All type of painting works (interior /exterior works)- 5671.00sqm, Electrical work executed in 1 year of Rs.38.00Lakhs, Water supply works executed in 1 year Rs.16.7.00Lakhs
A copy of the valid employees provident fund (EPF) registration certificate and paid Challan for the previous month
The annual turnover should be at least equivalent to twice the amount put to tender respectively in any of the two financial years during the last 5 years reckoned back from 2019-2020 (Assessment year) The annual turnover of pervious years shall be updated to 2023-2024.(submit detailed IT Returns in that only contract related receipts accepted in the detailed amount mentioned in the IT returns certified by the charted account.)
Valid GST registration certificate is mandatory
GST and IT clearance certificate, Balance Sheet and Profit&Loss Statement for the last five years from 2019-20 to 2023-24
liquid assets and /or availability of credit facilities(unconditional Credit lines/ letter of credit/ certificates from nationalized/scheduled banks) for meeting the fund requirement etc(30 % of the amount put to tender that is Rs. 1.49 Crores)
Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only)in each year of Rs. 9.96 Crores in last five years. Audited profit and loss account certified by a practising chartered accountant(CA) along with the copy of the IT returns filed for the years indicated above should be furnished.Duly mentioning UDIN on turn over certificate issued by CA.The annual turn over of previous year shall be updated to the year of tender notification at 10% per annum.
The intending bidder shall enclose the copy of the registered/enrolled in valid KPWD class-I contractor
Site visit report (should be signed by the concerned engineer is compulsory)
₹5,000
₹6.3 L
12 Dec 2025
1 Dec 2025
15 Dec 2025
9 Dec 2025
12 Dec 2025
PROPOSED CONSTRUCTION OF ADDITIONAL FLOORS(SECOND AND THIRD FLOOR) RVS FREE HOSTEL FOR GIRLS AT MELEKOTE, TUMAKURU
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. The work includes dismantling of RCC ...
Demolishing R.C.C. work manually scrapping, cleaning and straightening reinforcement from R.C.C.or R.B. work./ by mechanical means including stacking of steel bars and disposal of unserviceable materi...
Demolishing brickwork manually or by mechanical means, including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area, as per the direction of the E...
Demolishing brickwork manually or by mechanical means, including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area, as per the direction of the E...
Dismantling of skylight covering / grill work by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. The work includes dismantling...
Dismantling doors, windows and clearstory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of eng...
Removing of Solar Tanks and Overhead Tanks by mechanical or manual means, including dismantling, disconnecting all associated piping, supports, and accessories as required, and safe handling of the ta...
Providing and laying temporary water supply connections to existing floors during construction or renovation works, including the installation of necessary pipelines, fittings, and accessories to ensu...
Earth work excavation for Foundation and sump by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...
Providing and laying in position Cement Concrete for all Foundation And sump works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg M3 and minimum compressive strength of 4.00 Sqm conforming to IS 218...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg M3 and minimum compressive strength of 4.00 Sqm conforming to IS 218...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg M3 and minimum compressive strength of 4.00 Sqm conforming to IS 218...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for coLSns, pillars, post and struts, square/rectangular/ polygon in plan including cost of all materia...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for coLSns, pillars, post and struts, square/rectangular/ polygon in plan including cost of all materia...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for edges of slabs, plinth beams , sides and soffits of beams, beam haunchings, cantilever girders, bre...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for coLSns, pillars, post and struts, square/rectangular/ polygon in plan including cost of all materia...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for edges of slabs, plinth beams , sides and soffits of beams, beam haunchings, cantilever girders, bre...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for coLSns, pillars, post and struts, square/rectangular/ polygon in plan including cost of all materia...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for edges of slabs, plinth beams , sides and soffits of beams, beam haunchings, cantilever girders, bre...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Providing and fixing stainless steel 304 grade for staircase railings, skylight balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, sta...
Providing and fixing stainless steel 304 grade for staircase railings, skylight,balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, sta...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. At 21 kg/sqmtr including priming coat with approved steel primer all complet...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. At 21 kg/sqmtr including priming coat with approved steel primer all complet...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. At 21 kg/sqmtr including priming coat with approved steel primer all complet...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:6 (1 cement: 6 fine sand) to brick masonry including rounding off cor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:6 (1 cement: 6 fine sand) to brick masonry including rounding off cor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:6 (1 cement: 6 fine sand) to brick masonry including rounding off cor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:6 (1 cement: 6 fine sand) to brick masonry including rounding off cor...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:6 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:6 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:6 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off cor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off cor...
Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification (SECOND FLOOR)
Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification ( THIRD FLOOR)
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of t...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of t...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of t...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped ...
Providing & fixing of openable door made out of Mild Steel MS sections suitable for security applications, fabricated from cold rolled MS steel sections conforming to IS 1239/IS 1161 standards, with d...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves but including cost of materials, clamps, ...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves but including cost of materials, clamps, ...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves but including cost of materials, clamps, ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspe...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspe...
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm (SECOND FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm (THIRD FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm (TERRACE FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm (SECOND FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm (THIRD FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm (TERRACE FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm (SECOND FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm (THIRD FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm (TERRACE FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm (SECOND FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm (THIRD FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm (TERRACE FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS magnetic door stopper 75mm (SECOND FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS magnetic door stopper 75mm (THIRD FLOOR)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS magnetic door stopper 75mm (TERRACE FLOOR)
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (SECOND FLOOR)
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (THIRD FLOOR)
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (TERRACE FLOOR)
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm (SEC...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm (THI...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm (TER...
Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.(SECOND FLOOR)
Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.(THIRD FLOOR)
Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.(TERRACE FLOOR)
Providing and fixing factory made single leaf rigid GRP Sandwich Composite Door Shutter of 30 mm thick laminated with 2 GRP skins with wood green finish, fabricated using UV stabilized isopthalic gel ...
Providing and fixing factory made single leaf rigid GRP Sandwich Composite Door Shutter of 30 mm thick laminated with 2 GRP skins with wood green finish, fabricated using UV stabilized isopthalic gel ...
Providing and fixing factory made single leaf rigid GRP Sandwich Composite Door Shutter of 30 mm thick laminated with 2 GRP skins with wood green finish, fabricated using UV stabilized isopthalic gel ...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...
Providing and fixing of 3 trackx2/3/4 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Ela...
Providing and fixing of 3 trackx2/3/4 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Ela...
Providing and fixing of 3 trackx2/3/4 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Ela...
Providing and fixing of 3 trackx2/3/4 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Ela...
Providing and fixing of 3 trackx2/3/4 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Ela...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...
Providing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, morta...
Providing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, morta...
Providing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, morta...
Providing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, morta...
Providing Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...
Providing Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...
Providing Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...
Providing Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...
Providing & Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to g...
Providing & Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to g...
Providing & Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to g...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleanin...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleanin...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleanin...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleanin...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and f...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and f...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and f...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and f...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specific...
Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specific...
Providing and laying Anti skid floor tiles of size 600x600 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, exce...
Providing and laying Anti skid floor tiles of size 600x600 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, exce...
Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm ...
Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm ...
Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm ...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard ...
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard ...
Providing and executing horizontal cornices/mouldings at ground floor lvl , in GFRC/FRP/cement-based moulds, including all grooves, profiles and junction finishes.All mouldings, cornices, and pilaster...
Providing and executing architectural coLSn features (fluted pilasters with base and capital detailing) in GFRC / FRP / Cement Moulding as per approved elevation design. 2 Front coLSns ...
Providing and executing horizontal cornices/mouldings at ground floor lvl , in GFRC/FRP/cement-based moulds, including all grooves, profiles and junction finishes.All mouldings, cornices, and pilaster...
Providing and executing architectural coLSn features (fluted pilasters with base and capital detailing) in GFRC / FRP / Cement Moulding as per approved elevation design.(SECOND FLOOR)
Providing and executing horizontal cornices/mouldings at ground floor lvl , in GFRC/FRP/cement-based moulds, including all grooves, profiles and junction finishes.All mouldings, cornices, and pilaster...
Providing and executing horizontal cornices/mouldings at ground floor lvl , in GFRC/FRP/cement-based moulds, including all grooves, profiles and junction finishes.All mouldings, cornices, and pilaster...
Providing and executing rectangular patti at third floor lvl , in GFRC/FRP/cement-based moulds, including all grooves, profiles and junction finishes.All mouldings, cornices, and pilasters to be fin...
PProvision of PUF insulated panel roofing (30 mm thick) over a properly fabricated MS structural framework at the terrace floor level, including all necessary supports and slope arrangements as per ap...
BOREWELL Geophysical invenstigation of site for sinking borewell
Sinking 0f Borewell 165 mm dia upto required depth 0-250
Sinking 0f Borewell 165 mm dia upto required depth 250-350
Sinking 0f Borewell 165 mm dia upto required depth 350-450
Sinking 0f Borewell 165 mm dia upto required depth 450-550
Sinking 0f Borewell 165 mm dia upto required depth 550-650
Sinking 0f Borewell 165 mm dia upto required depth 650-750
Sinking 0f Borewell 165 mm dia upto required depth 750-850
Sinking 0f Borewell 165 mm dia upto required depth 850-950
Sinking 0f Borewell 165 mm dia upto required depth 950-1000
10Inches PVC Casing pipe
MS casing pipe heavy
Welding charges
End cap fitting
Water injection charges
Slotted pvc pipe
Transportation charges
Borewell flushing charges
Setting and allignment charges
Supplying of Bore well Submersible Pump set & Accessories to your site. InchesTexmo,Industries TaroInches 4.K.W.2880.R.P.M,TRF.1545.6.HP.45 Stage,.Impiller 100 MM.Borwell.Submarsible.Centrifugal, Pump...
Supplying of Bore well Submersible Pump set & Accessories to your site. Control Panel Board (BCH) Make 5 HP to 7.5.HP Box Size 18*14*6 With 16Ams Contactor VO & AM Meter, Auto Cum Preventor With Overl...
Supplying of Bore well Submersible Pump set & Accessories to your site. InchesTecmo Inches Make.XLPE ISI & ISO 9001 Product 4 Sq mm 400/415 Volts PVC to PVC 3 Core Water Proof Flat Cabel Wire.
Supplying of Bore well Submersible Pump set & Accessories to your site. Vedanth,Super Hevy Make.40InchesMM.20 KG HDP. Pipe
Supplying of Bore well Submersible Pump set & Accessories to your site. 40InchesMM. SS.End pittings
Supplying of Bore well Submersible Pump set & Accessories to your site. 40InchesMM Suporting clam pset .
Supplying of Bore well Submersible Pump set & Accessories to your site. 40InchesMM Shart Bend 90 Digree .
Supplying of Bore well Submersible Pump set & Accessories to your site. 32x40Inches SS. Bush
Supplying of Bore well Submersible Pump set & Accessories to your site. N.R.V 40InchesMM
Supplying of Bore well Submersible Pump set & Accessories to your site. 40 MMInchesColler & Vose coller Set
Supplying of Bore well Submersible Pump set & Accessories to your site. 40Inches Borwll cap
Supplying of Bore well Submersible Pump set & Accessories to your site. WondarTape Roll
Supplying of Bore well Submersible Pump set & Accessories to your site. Transportation & Errection Charges
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete(SECOND FLOOR TOILET )
Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete(THIRD FLOOR TOILET )
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete...
Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete...
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (SECOND FLOOR TOILET )
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (THIRD FLOOR TOILET )
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (SECOND FLOOR TOILET )
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (THIRD FLOOR TOILET )
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with...
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with...
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c...
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c...
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(SECOND FLOOR TOILET )
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(THIRD FLOOR TOILET )
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(SECOND FLOOR TOILET )
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(THIRD FLOOR TOILET )
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge.(SECOND FLOOR TOILET )
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge.(THIRD FLOOR TOILET )
Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore)(SECOND FLOOR TOILET )
Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore)(THIRD FLOOR TOILET )
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, ...
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, ...
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g(SECOND FLOOR TOI...
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g(THIRD FLOOR TOIL...
Providing and fixing brass bib cock of approved quality 15 mm nominal bore(SECOND FLOOR TOILET )
Providing and fixing brass bib cock of approved quality 15 mm nominal bore(THIRD FLOOR TOILET )
Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , inc...
Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , inc...
WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the ...
WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the ...
WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the ...
WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the ...
WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore(SECOND FLOOR )
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore(THIRD FLOOR )
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore(SECOND FLOOR )
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore(THIRD FLOOR )
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore(SECOND FLOOR )
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore(THIRD FLOOR )
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40 mm nominal bore(SECOND FLOOR )
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40 mm nominal bore (THIRD FLOOR )
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expa...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(TERRACE FLOOR) 20 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(TERRACE FLOOR) 25 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : (TERRACE FLOOR) 32 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : (TERRACE FLOOR) 40 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : (TERRACE FLOOR) 50 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : (TERRACE FLOOR) 65 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : (TERRACE FLOOR) 80 mm nominal bore
Air Vent Cowel 75mm
Air Vent Cowel 110mm
Supplying, installing, testing and commissioning of Sintex tanks at terrace level , including necessary accessories & making necessary connections as required etc.,complete.5000 lts (TERRACE FLOOR)
Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equal...
Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equal...
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (Raw water pumps) (3 HP, size 50x40 Head 30M, Disc...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Providing and fixing a sump tank cover for the designated sump tank as per approved drawings, including supply and installation of RCC/steel/GRP modular covers designed to safely bear pedestrian and m...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(GROUND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(SECOND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(THIRD FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch(SECOND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch(THIRD FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket(GROUND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket(SECOND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket(THIRD FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.(SECOND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.(THIRD FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch(SECOND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch(THIRD FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket(SECOND FLOOR)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket(THIRD FLOOR)
Supplyin and Fixing Metal Fan Box with Round Hook.(SECOND FLOOR)
Supplyin and Fixing Metal Fan Box with Round Hook.(THIRD FLOOR)
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...
Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circ...
Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole(SECOND FLOOR)
Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole(THIRD FLOOR)
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole (SECOND FLOOR)
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole (THIRD FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip (GROUND FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 40 x 6 mm GI strip (GROUND FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip (SECOND FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip (THIRD FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 40 x 6 mm GI strip (SECOND FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 40 x 6 mm GI strip (THIRD FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 600 x 600 x 3 mm GI Plate(SECOND FLOOR)
GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 600 x 600 x 3 mm GI Plate(THIRD FLOOR)
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (SECOND FLOOR)
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (THIRD FLOOR)
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip (SECOND FLOOR)
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip (THIRD FLOOR)
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin(SECOND FLOOR)
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin(THIRD FLOOR)
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076Inches twin twisted PVC insulated w...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076Inches twin twisted PVC insulated w...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076Inches twin twisted PVC insulated w...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4Inches dia telescopic M. S. pipe, with 2Inches dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm t...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4Inches dia telescopic M. S. pipe, with 2Inches dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm t...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.(SECOND FLOOR)
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.(THIRD FLOOR)
MAIN LT PANEL Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4Inches dia telescopic M. S. pipe, with 2Inches dia 1.5m long M. S. bracket and are welded with suitable angl...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4Inches dia telescopic M. S. pipe, with 2Inches dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm t...
CABLE / CONDUIT TRAYS 300mm x 50mm x 2mm Cable Tray (SECOND FLOOR)
CABLE / CONDUIT TRAYS 300mm x 50mm x 2mm Cable Tray (THIRD FLOOR)
SUPPLY FOR LIGHT FIXTURE & FANS Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aLSinium with white powder coated prewired ...
Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aLSinium with white powder coated prewired to mains connector & has swiveli...
Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aLSinium with white powder coated prewired to mains connector & has swiveli...
Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% LSen maintenance with CRI lessthan 80. Power Input: 220-240V @ 50/60Hz & Pow...
Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% LSen maintenance with CRI lessthan 80. Power Input: 220-240V @ 50/60Hz & Pow...
Supplying & fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIlessthan 70%. efficacy lessthan80 LSen per watt, lifelessthan 25000 burni...
Supplying & fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIlessthan 70%. efficacy lessthan80 LSen per watt, lifelessthan 25000 burni...
Supplying & fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIlessthan 70%. efficacy lessthan80 LSen per watt, lifelessthan 25000 burni...
Supplying & fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIlessthan 70%. efficacy lessthan80 LSen per watt, lifelessthan 25000 burni...
Supplying & fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIlessthan 70%. efficacy lessthan80 LSen per watt, lifelessthan 25000 burni...
Supplying & fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIlessthan 70%. efficacy lessthan80 LSen per watt, lifelessthan 25000 burni...
Supplying of recess mounting non integral type .LED W LSinaire comprising of pressure decast/extruded aLSinium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRIl...
Supplying of recess mounting non integral type .LED W LSinaire comprising of pressure decast/extruded aLSinium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRIl...
Supply of LED Streetlight LSinaire with pressure die cast aLSinium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...
Supply of LED Streetlight LSinaire with pressure die cast aLSinium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...
Supplying exhaust fan of 1440 RPM of 300mm (12Inches) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. (SECOND FLOOR)
Supplying exhaust fan of 1440 RPM of 300mm (12Inches) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. (THIRD FLOOR)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated ...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated ...
Supply of LED Streetlight LSinaire with pressure die cast aLSinium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...
Supply of LED Bollard light fitting of ...W with pressure die cast aLSinium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulde...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Electrical Approved make list.xlsx
Tender Document • 0.01 MB
Kw-4 Technical bid Tumakuru.docx
Tender Document • 0.22 MB
List of Makes Plumbing sanitary works.xlsx
Tender Document • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .