REPAIR AND MAINT OF STREET LIGHT, SECURITY LIGHT AND ASSOCIATED WORK IN CERTAIN UNITS AT MIL STN JAISALMER

Amount

Taking down defective street light/ flood light/post top lantern fitting of any size /type/capacity any Watt from height of pole/walls/high mast of any location up to 16M height for repair work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as specified and directed by Engineer-in-charge. Note :- (a) Spares like LED Driver,surge protector etc. shall be measured and paid separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder & other T&P required etc shall be arranged by the contractor without any extra cost. (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts, cirle clips , clamps etc required if any at site.

Supply & fix in repair of electronic driver for LED light fitting, LED out put power 30 watt, input voltage range : 170 - 300 volt AC , out put voltage DC as per make/ model range: 24 volt to 110 volt, make as per site requirement complete all as specified and directed by Engineer-in-charge.

All as per item No 2 above but capacity 45 watt

All as per item No2 above capacity 60 watt

All as per item No 2 above capacity 70 watt

All as per item No 2 above capacity 90 watt

All as per item No 2 above capacity 200 watt

All as per item No 2 above capacity 250 watt

All as per item No 2 above capacity 400 watt

Supply & fix in repair of Surge Protector 10KV for street light fitting, Normal voltage input range : 170- 300 volt complete all as specified and directed by Engineer-in-charge.

Labour only for making unserviceable street/security lights/solar light serviceable placed at pole by disconnection / Isolating power supply either from pole junction box or by disconnecting overhead jumpers and carrying out de-carbonization / de-sulphation at connection points with overhead conductor / light fitting / junction box terminal including replacement connection wire complete all as specified and directed by Engineer-in-charge. Note : - Cable shall be measured and paid seprately.

Supply And Fixing in repair Led Street Light Of Capacity 60 Watt, Including making electrical connection to the fitting with suitable size of wire,Having Pressure Die Cast Aluminium Housing, Ip-66 Having Efficiency Of ≥ 110 Lumens/Watt with toughend glass , Operating Voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver Also. The Fitting Must Be Suitable For 35 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements) Including Connecting Up With Three Core Twisted Flexible Copper Conductor Cable With Suitable Size, Mounting Pipe/Bracket, Nut, Bolts And Accessories Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. all as specified and directed by Engr-in-Charge. Make –Crompton Cat No TRP-409-60-57-SL-GL-NSG or equivalent in Appx 'C' list of makes.

Supply And Fixing in repair Led Street Light Of Capacity 45 Watt, Including making electrical connection to the fitting with suitable size of wire,Having Pressure Die Cast Aluminium Housing, Ip-66 Having Efficiency Of ≥ 110 Lumens/Watt, Operating Voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver Also. The Fitting Must Be Suitable For 35 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements ) Including Connecting Up With Three Core Twisted Flexible Copper Conductor Cable With Suitable Size, Mounting Pipe/Bracket , Nut, Bolts And Accessories Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. all as specified and directed by Engr-in-Charge. Make –Crompton Cat No TRP-409-45-57-SL-GL-NSG or equivalent in Appx 'C' list of makes.

Supply & Fixing Led Flood Light Fitting 250 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 30,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95,Cct – 5700k, Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver.Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X1.5 Sqmm Frlsh Wire, All As Per Directed By Eic As all as specified and directed by Engr-in-Charge Per Make – Crompton Cat no CFS-506-250-57-60 D-SL-GL-NSG or equivalent in Appx 'C' list of makes.

Supply & Fixing Led Flood Light Fitting 200 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 30,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95,Cct – 5700k, Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver.Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X1.5 Sqmm Frlsh Wire, All As Per Directed By Eic As all as specified and directed by Engr-in-Charge Per Make –Crompton Cat no CFS-501-200-30-60D-SL-GL-NGG or equivalent in Appx 'C' list of makes.

Supply & Fixing Led Flood Light Fitting 400 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 48,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95, , Cct – 5700k, Of Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Seperate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver.Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X 1.5 Sqmm Frlsh Wire, All As Per Directed By Eic all as specified and directed by Engr-in-Charge Per Make – Crompton Cat no CFS-512-400-57-60 D-SL-GL-NSG or equivalent in Appx 'C' list of makes.

S&F PVC insulated, sheathed weather proof, copper conductor of size 1.5 sqmm, 3 core Including Disconnected including taking down old existing unserviceable cable complete all as specified and directed by Engineer-in-charge.

S&F PVC insulated, sheathed weather proof, aluminium conductor of size 6 sqmm, 2 core Including Disconnected including taking down old existing unserviceable cable complete all as specified and directed by Engineer-in-charge.

M&L PVC conduit 20 mm, heavy duty rigid non metallic including of all tee, bends, elbows etc Including Disconnected including taking down old existing unserviceable counduit complete all as specified and directed by Engineer-in-charge.

S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) and including one coat of red oxide primer and two coat of aluminium paint over a pole including dismantlaing/taking out existing PCC/Steel tubular pole and making surface good complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm grade stone aggregate in foundation of pole/struts etc including necessary form work complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete (1:3:6) type C-2 using 40mm grade stone aggregate in foundation of stay assembly/pole including necessary form work all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 using 20mm grade stone aggregate for couping/encasing around of pole including necessary form work finished and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Taking out LT UG cable of any size/any core complete all as specified and directed by Engineer-in-charge.

Supply, laying, testing and commissioning of LT UG, XLPE insulated, heavy duty, 1100V grade of size 50 Sqmm 3.5 core electric cable with aluminium conductor, served with an inner sheathing of PVC tape armoured eith galvanized steel wire or tape and overall PVC sheathed, laid in trench or passing through pipe, making all connection with and including provision of necessary glands, lugs, bushing etc as required complete all as specified and directed by Engineer-in-charge of following size:- Note: Earthwork excavation sand cushioning, Jodhpur stone patti, GI protcetion pipe shall be measured and paid separately in their respective items.

All as per item No 25.00 above but size 35 Sqmm 3.5 core

All as per item No 25.00 above but size 25 Sqmm 4 core

All as per item No 25.00 above but size 16 Sqmm 4 core

All as per item No 25.00 above but size 10 Sqmm 4 core

All as per item No 25.00 above but size 10 Sqmm 2 core

Relaying of old retrieved servicable LT UG cable of any size /any core complete all as specified and directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

M&L for Tibba sand for cushioning with layers of sand 8 cm before laying of cable & 15 cm after laying of cable (total 23 cm ) in trenches, duly punning to a thickness of 18 cm for cable protection complete all as specified and directed by the Engineer-in-Charge. Note:- Thickness after punning shall be measured for payment.

Taking down old existing stone patti of any size complete all as specified and directed by the Engineer-in-Charge.

M&L for laying 40 to 50 mm thick roughly hammer dressed jodhpur stone patti cable cover 25 cm to 30 cm wide and not exc 60 cm long each laid dry abuting with each other with maximum gap between adjacent patti/ slabs not exc 10 mm complete all as specified and directed by the Engineer-in-Charge.

Relaying of old retrived Stone Patti of any type any dia complete all as specified and directed.

Supply & fix 40 mm bore GI tubing meduim grade in trenches or on pole/ inside road for cable protection including taking down existing unserviceable pipe complete all as specified and directed by the Engineer-in-Charge.

Supply & fix 50 mm bore GI tubing meduim grade in trenches or on pole/ inside road for cable protection including taking down existing unserviceable pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing MCCB 4 Pole 100 Amps, breaking capacity 16 KA, thermal & magnetic adjustable type, 415 volts with connection link on LT panel /fedder piller including taking out existing UNSV / burnt MCCB complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

Supply and fixing MCCB 4 Pole 125 Amps, breaking capacity 16 KA, thermal & magnetic adjustable type, 415 volts with connection link on LT panel /fedder piller including taking out existing UNSV / burnt MCCB complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F miniature circuit breaker (MCB) of single pole and neutral SPN 32 AMP 240V, 10 KA 'C' curve in the MCB DB complete with connection testing and commissioning including taking out existing MCB complete all as specified and directed by Engineer-in-charge.

S&F 415V 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB/ Panel box/ feeder piller box complete with connection testing and commissioning MCB, TPN 40 Amp including taking out existing MCB complete all as specified and directed by Engineer-in-charge.

S&F 415V 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB/ Panel box/ feeder piller box complete with connection testing and commissioning. MCB, TPN 63 Amp, including taking out existing MCB complete all as specified and directed by Engineer-in-charge.

S&F galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings and including taking down existing bracket of any description complete all as specified and directed by Engineer-in-charge.

Supply and Fixing of pole mounted junction box of outer size 300x200x120mm made out of FRP body (hot mulded type) with IP-66 protection and locking with screws alongwith 6 Amp rating MCB SP-01 No, up to 50 Amp rated 4 pole connector suitable to insert the cable size up to 25 sqmm x 4 core -02 No and din rail suitable for mounting the MCB/Connector etc complete in side box and duly fixed with 25x3mm FI clamps with nut bolts of suitable size on steel tubular pole/PCC/RCC pole including cable glands, aluminum lugs/thimbles for incoming and out going cables including taking down old existing unserviceable box complete all as specified and directed by Engineer-in-charge.

Material and labour for straight through(Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 16to 50 Sqmm including taking out/ dismantling the old burnt cable joint termination complete all as specifed and directed by Engineer-in-charge.

Material and labour for preparation of old painted surface of LT Concrete electric pole of any size/any height by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior, synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos), including painting the cross arms/bracing support on poles with a coat of aluminium paint, silver colour aluminium paint with coating of primer and writing of identification Nos with proper stencil cut etc complete all as specifed and directed by Engineer-in-charge.

Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc complete all as specifed and directed by Engineer-in-charge.

Material and labour for preparation of old painted surface of F/P box/LT Panel by removing all dirt, dust, etc and painting complete surface including connected accessories with one coat of synthetic enamel paint of approved colour over a coat of primer including writing of identification with proper stencil cut etc complete all as specifed and directed by Engineer-in-charge.

S&F Lithium based energy efficient Integrated solar street light of 20 watt in single body with FRP/Aluiminum duly polyurenthane coating encases with monocrystalline solar PV panel of 30/35Wp, Lithium battery 11.1/12.8 Volt, 24 Ah with inbuit BMS, IP 65/66, High brightness W-LED (120-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor, Dusk to dawn operation weight not more than 10-12 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc including taking down existing unserviceable street light complete all as specified and directed by Engineer-in-charge. Note : Short Circuit, overload, reverse polarity and battery protections to be provided. OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint.

S&F street light nature switch (using infrared sensor technology) based automatic street light control panel. the panel should be suitable enough to take 3 Phase load of 12 KW. Nature switch operation should be based on natural light Lux* level. required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable 3 Nos power Contractors and 03 Nos incoming MCB's 63 Amp & 3 Nos outgoing MCB's of 32 Amp each & circuit wiring (Copper) of min 10 sqmm with lug should be enclosed in a pole/wall mountable rust proof, electric shock proff, termite proof and FR grade SMC elclosure confirming to IP 66. The circuit should also have provision for Manual operation (i.e. Sensor by Pass option) including taking down existing unserviceable nature switch of any description complete all as specified and directed by Engineer-in-charge.

S&F street light nature switch (using infrared sensor technology) based automatic street light control panel. the panel should be suitable enough to take 3 Phase load of 8 KW. Nature switch operation should be based on natural light Lux* level. required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable 3 Nos power Contractors and 03 Nos incoming MCB's 63 Amp & 3 Nos outgoing MCB's of 32 Amp each & circuit wiring (Copper) of min 10 sqmm with lug should be enclosed in a pole/wall mountable rust proof, electric shock proff, termite proof and FR grade SMC elclosure confirming to IP 66. The circuit should also have provision for Manual operation (i.e. Sensor by Pass option) including taking down existing unserviceable nature switch of any description complete all as specified and directed by Engineer-in-charge.

Supply & fix MNX Power contactor suitable for power supply 40 Amps 4 pole 4 NO Contactor including making electrical connection to the contactor complete and taking down old unsv complete all as specified and directed by Engineer-in-charge.

Supply & fix MNX Power contactor suitable for power supply 63 Amps 4 NO Contactor including making electrical connection to the contactor and taking down old unsv complete all as specified and directed by Engineer-in-charge.

Material and labour for cutting the existing bituminious road / hard standing to size not exceeding 45 CM wide and depth not less than 45 cm for passing UG cable through GI pipe and making good the good distrubed surface and filled excavated material and 200 mm depth with plane cement concrete 1:3:6 type C1 using 20 mm graded aggregate complete all as specified and directed by Engineer-in-charge.

S&F battery 12 V, 40 AH with controller suitable for solar lighting system and taking down existing unserviceable battery complete all as specified and directed by Engr -in- Charge

S&F Digital Astronomical timer switch 240V AC-2W, C/O, Base/DIN type complete for switching of contactors complete including taking down existing unserviceable timer switch of any description complete all as specified and directed by Engineer-in-charge.

S&F copper wire 2.5 Sqmm 6 core suitable for high mast light including taking down existing unserviceable wire complete all as specfied and directed by Engineer-in-charge.

Taking down by disconnected the existing electrical connection of winch motor for rewinding /repairs including rewinding the mortor of capacity up to 2 HP with best class supper enameled copper wire of existing guage and size including varnishes and insulating 230 V AC 50 HZ electric supply system. refixing and reconnected it to the original location for satisfactory functioning of wintch on 230 v electric supply system complete all as specfied and directed by Engineer-in-charge.

Taking down and dismantling existing high mast pole of height 12 to 20 mtr from bottom plate ,nuts bolts, gear box and head frame for dismantling the unserviceable parts including repair control panel wiring, old unsv lights, complete with the help of suitable T & P required for holding, lifgting the pole, replacement of unservicable part, oiling and greasing, of pulleys, gear box, rope and all moving parts including assembling, installation of high mast pole complete as directed by Engineer-in charge. Note 1. cost of crane for dismantling high mast pole is deemed to be included in quoted rate. 2. Cost of oling and greasing of moving parts is deemed to be quoted rate.

S&F PIR Motion Sensor 170uA for 12 to 40 watt Solar Light Standard Detection 5m Lens Color : White including taking down existing unserviceable sensor complete all as specified and directed by Engr -in- Charge

Supply & installation lithium battery 11.1V/ 12-20 Ah (Suitable for 12watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 12 watt integrated solar lights including taking down existing unserviceble light of any description complete all as specfied and directed by Engineer-in-charge.

Supply & Installation Lithium Battery 11.1V/ 16 Ah (Suitable for 16watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 16 watt Integrated Solar Lights including taking down existing unserviceble light of any description complete all as specfied and directed by Engineer-in-charge.

Supply & Installation Lithium Battery 11.1V/ 24 Ah (Suitable for 20 watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 20 watt Integrated Solar Lights including taking down existing unserviceble light of any description complete all as specfied and directed by Engineer-in-charge.

S&F Rocker Switch 6 to 10 Amp for solar lights including taking down existing unserviceable switch of any description complete all as specfied and directed by Engineer-in-charge.

Note : (a) Contractor has to arrange his own vehicles along with mounted hydraulic ladder/articulated & telescopic boom lift arrangement for attending the complaint throughout jaisalmer cantt area. (b) Contractor shall depute minimum 2 staff daily to attend and rectify the complaint. if not, Contractor shall have to bear a penalty of Rs 50.00 per complaint or maximum of Rs 500 per day on this account (c) Complaints has to attend and rectify the complaint/defect irrespective of no of trips/Complaints as alloted by Eng-in-Charge.(d) Complaint should be attend in Night also. (e) Contractor has to arrange telescopic boom lift for maintenance at height of 15m at his own cost. No extra payment will be paid by department.

GITANSH ENGINEERS AND COMPANY

M/s Yash Electrical and Maintenance

M/s Rohit Construction Co.

Manisha Enterprises

Mighty Steel Sales Crop

M/S ROORKEE ENGINEERING

shivam electricals and engneers