Civil work at Thiruporur

Amount

Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Hard gravelly soil, stiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., complete including cost of all materials lead lift etc complete

Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Soft Disintegrated Rock not requiring blasting including cost of all materials lead lift etc complete

Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Medium rock dense medium rock not requiring blasting including cost of all materials lead lift etc complete as directed by the department engineer at site.

Removing Hard rock by wedging, chiseling and trimming to proper shap where blasting is prohibited, including the cost of all materials lead lift etc complete as directed by the department engineer at site.

Providing and laying Sand filling for foundation including cost of labour, transport, consolidation, lead and lift etc., complete as per standerd specification and as directed by the department at site.

Plain Cement Concrete 1:3:6 using 40mm HBG stone for foundation including cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site .

R:C:C 1:1.5:3 using 12 to 20mm HBG metal including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. Without form work

R.C.C. 1:1.5:3 using 12- 20mm metal for foundation for cable duct wall with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

R.C.C. 1:1.5:3 using 12- 20mm metal for foundation fire protection wall with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

P:C:C 1:2:4 using 12 to 20mm HBG metal for Foundation including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. Without form work

P:C:C 1:2:4 using 12 to 20mm HBG metal for Transformer plinth with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

P:C:C 1:2:4 using 12 to 20mm HBG metal for Gantry, CT, LAS & Support with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

P:C:C 1:2:4 using 12 to 20mm HBG metal for breaker with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

P:C:C 1:2:4 using 12 to 20mm HBG metal for AB Switch with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

Plastering in cement mortar 1:3, 12 mm thick for inside and outside walls including cost of all material scaffolding, curing, labour with all lifts etc., complete as directed by dept.Engineer at site

Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site.

Providing and filling with well gravel including cost of all materials, transport, consolidation, labour, lead, lift etc., complete as directed by the dept Engineer at site

Provinding, supplying and filling with quarry dust including cost of all labour, materials, leads, lift,etc., complete and as directed by the department engineer at site.

Providing, supplying and filling with 10-12mm metal including cost of all labour, materials, leads, lift,etc., complete and as directed by the department engineer at site.

Providing and supplying of M.S angle at size 50x50x6mm and MS channel to required length fixing in cable duct correct level to alignment, fixing in position, welding if necessary, transport, paintng with enamul paint over a coat of primer, labour, lead, lift, etc., complete as directed by the department at site.

Colour washing two coats using shell lime over one coat of white washing including cost of all materials, labour, lead lift etc., complete as per standard specification and as directed by the department engineer at site.

Labour charges for assembling of template in correct position and aligenment for various equipment plinth and grouting the foundation bolts including cost of all materials transport, labour, lead, lift etc., complete as directed by the dept. Engineer at site.

Supplying and fixing GI bolt and nuts with minimum 100mm long bend and thread 2 nos of GI nuts and washer including all materials, labour,lead,lift etc., complete as directed by the department engineer at site. 20mm dia, 2.10 m length

Supplying and fixing GI bolt and nuts with minimum 100mm long bend and thread 2 nos of GI nuts and washer including all materials, labour,lead,lift etc., complete as directed by the department engineer at site. 25mm dia, 2.10 m length

Providing grout holes at required position including cost of all materials, curing,labour, lead and lift etc., complete as directed by the department engineer at site.

Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 40mm dia

Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 32 mm dia

Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 25 mm dia

Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 32mm dia

Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 25mm dia

Labour charges for refilling with excavated earth other than sand including cost of labour, transport, consolidation, lead and lift etc., complete as directed by the department engineer at site.

Labour charges for dismantling of Reinforced Cement Concrete and disposing the debris away from the SS permises including all materials, labour, lead and lift etc., complete as directed by the department engineer at site.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

J SABARI

K RAJARAM

S S AND CO