Loading
Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹4.7 L
Closing Date
6 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
16 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Note: In case, date of tender inviting is on or after date of statutory deadline for audit of balance sheet of previous FY (i.e. 30th Sept or as further extended for this FY), audited balance sheet of 4th previous year shall not be considered unless concerned CA certifies that balance sheet is not audited yet as on date of invitation of this tender.
The contractor should have valid Electrical Contractor License issued by Govt. and submit along with tender document. If valid Electrical Contractor License is not submitted along with tender document, then offer will be summarily rejected.
16 conditions · 3 needing a document upload
The tenderer shall submit all relevant documents as detailed in para 14 &18.10 of Tender Form (Second Sheet) of Part I of GCC work-2022.
The tenderer shall submit copy regarding status of firm i.e. sole proprietorship, partnership, Company, Society/Trust etc. and also submit a power of attorney and other relevant documents as detailed in Para no. 15 of Tender Form (Second Sheet) of Part I of attached GCC-2022.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. Following documents shall be submitted by the tenderer:
a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet)of GCC-2022.
b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC2022
(c) Partnership Firm: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC2022
(e) Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(f) LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders /contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)of GCC-2022.
(g) Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor should quote only the above/below percentage on estimated value, in the space provided at web portal for the purpose & nowhere else. Financial & Technical conditions quoted at any place other than prescribed space shall not be entertained while evaluating the offer.
Tenderer are required to go through the documents attached along with the tender and submit their bids accordingly.
Provision of Spare AT Cables, CLS Panels & Associated Items and Improvement of Power Supply Arrangement & illumination levels at various LC Gates over BKN Division.
08-EL-BKN-E-Tender-26-27
08-EL-BKN-E-Tender-26-27
Open
Works - General
10 Months
Bikaner, Rajasthan
₹0
₹4.7 L
6 Aug 2026
14 Jul 2026
23 Jul 2026
106 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,34,98,451 | ||
| — | 11.00 | — | — | ||
| Supply fixing, connecting, installation, testing and commissioning of Automatic Change over control and Distribution panels for CLS to work on 05 KVA, 240 V, 50Hz at 30A capacity as per RDSO specification No. TI/SPC/ PSI/CLS/0025 with latest amendment. (Inspection Clause : By Railway Representative) | — | — | — | 3,77,971 | |
| — | 8.00 | — | — | ||
| Supply fixing, connecting, installation, testing and commissioning of Automatic Change Over Control and Distribution Panels for CLS to work on 10 KVA, 240 V, 50 Hz at 60A capacity as per latest RDSO specification no. TI/SPC/PSI/CLS/0025 with latest amendment. (Inspection Clause : By Railway Representative) | — | — | — | 2,97,792 | |
| — | 6.00 | — | — | ||
| Supply fixing, connecting, installation, testing and commissioning of Automatic change over panel complete for colour light signaling system having 3 phase supply 150 Amps capacity with all connected accessories viz. Rotary selector switch, air break contractor, MCCBs, MCBs, LEDs, alarm buzzer, alarm reset micro switch etc. meeting RDSO technical specification No. TI/SPC/PSI/CLS/0025 with latest amendment. (Inspection Clause : By RITES) | — | — | — | 11,78,268 | |
| — | 10.00 | — | — | ||
| Supply and fixing of Distribution Box/LV Box made of 2mm thick CRC steel sheet with CAM and locking arrangement , Stud type terminals suitable for 2x150 sqmm AL Cable with 160 Amps MCCB, Breaking capacity 36 kA as per spec. (Inspection Clause : By Railway Representative) | — | — | — | 1,65,310 | |
| — | 15.00 | — | — | ||
| Supply and fixing of Distribution Box/LV Box made of 2mm thick CRC steel sheet with CAM and locking arrangement and Stud type terminals suitable for 2x70 sqmm AL Cable with 63Amps MCCB Breaking capacity 16 kA as per spec. (Inspection Clause : By Railway Representative) | — | — | — | 1,37,025 | |
| — | 15.00 | — | — | ||
| Supply, fixing and commissioning of 160 A 4 pole MCCBs with 36 KA breaking capacity adjustable thermal adjustable magnetic trip unit. (for AT terminal box/LV Box as per specification) | — | — | — | 2,27,805 | |
| — | 15500.00 | — | — | ||
| Supply of 2x70 sqmm Cross linked polyethylene and XLPE insulated PVC outer sheathed Armoured cable with aluminium conductor suitable for rated voltage at 1100volts grade insulation grade:C1-FR and conforming to IS:7098 Part-1 1988 with latest amendment number 1 and 2 and 3 Reaffirmed 2005 or latest. Make: Polycab, KEI, Havells, Finolex, RR Kabel or similar of reputed make.(Inspection Clause : By RITES) (Inspection Clause : By RITES) | — | — | — | 35,18,500 | |
| — | 7500.00 | — | — | ||
| Supply of 2x150 sqmm Cross linked polyethylene and XLPE insulated PVC outer sheathed Armoured cable with aluminium conductor suitable for rated voltage at 1100 volts grade insulation grade:C1-FR and conforming to IS:7098 Part-1 1988 with latest amendment number 1 and 2 and 3 Reaffirmed 2005 or latest.Make: Polycab, KEI, Havells, Finolex, RR Kabel or similar of reputed make. (Inspection Clause : By RITES) (Inspection Clause : By RITES) | — | — | — | 55,95,000 | |
| — | 25800.00 | — | — | ||
| — | — | — | 6,45,000 | ||
| — | : - Laying, Air/Pole/Pipe/Trench/wall/cable | testing, commissioning tray etc. with complete | of LT cable of cable | ||
| — | 18500.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 mtr as per spec. (trench work may be on kuchha/ pucca land and all type of soil as per site requirement and without protective layer of brick) Surface of trench shall be made good in all respect and satisfaction of site engineer. | — | — | — | 7,95,500 | |
| — | 14800.00 | — | — | ||
| Supply of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness 3 mm, PN 6, PE 80 as per requirement. (Inspection Clause : By RITES ) | — | — | — | 10,50,800 | |
| — | 14800.00 | — | — | ||
| Laying of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness 3 mm, under the road. The work involves laying of HDPE pipe along with transportation. | — | — | — | 1,33,200 | |
| — | 5800.00 | — | — | ||
| Supply of HDPE pipe conforming to IS 4984:2016, 75/80 mm dia, PN 6, PE 80 as per requirement. (Inspection Clause : By RITES) | — | — | — | 5,97,400 | |
| — | 5800.00 | — | — | ||
| Laying of HDPE pipe conforming to IS 4984:2016, 75/80 mm dia, under the road. The work involves laying of HDPE pipe with transportation. | — | — | — | 81,200 | |
| — | 1400.00 | — | — | ||
| Supply of HDPE pipe conforming to IS 4984:2016, 110 mm dia, PN-6, PE-80, as per requirement.(Inspection Clause : By RITES) | — | — | — | 5,68,400 | |
| — | 200.00 | — | — | ||
| Laying of HDPE pipe conforming to IS 4984:2016, 110 mm dia, PN-6, PE-80, under the road. The work involves laying of HDPE pipe with transportation. | — | — | — | 3,000 | |
| — | 1800.00 | — | — | ||
| Laying of Spun/MS/GI/HDPE pipe 100 mm to 200 mm by push through method in Railway yard/below track/Road. | — | — | — | 8,96,400 | |
| — | 1400.00 | — | — | ||
| Drilling of horizontal bore below Track/Road by pushing method (trenchless technology) for laying of RCC/HDPE/DWC pipe of various sizes up to 200 mm dia. in presence of Railway representative taking all necessary safety precautions related track and movement of trains. Horizontal boring will be done at minimum 1.5 Mtr. Below from ground level at railway track portion. | — | — | — | 18,53,600 | |
| — | 650.00 | — | — | ||
| Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 50 mm dia. Pipe should be of reputed make and as per tech. spec. | — | — | — | 1,45,600 | |
| — | 550.00 | — | — | ||
| Supply & providing of cable marker. The cable marker shall be made of MS Sheet 1.5mm thick size 150X100mm welded with 12mm dia MS rod 85 cm long. The lower end of rod should be turned in hooks shape and attached with the cable at the time of laying. | — | — | — | 1,05,050 | |
| — | 30.00 | — | — | ||
| Supply and fixing of junction box size 390x305x170mm comprising of SMP/FRP material with rubber gasket, locking arrangement, zinc passivated earth bolt, etc. similar to Sintax model no. GSJB 3525 or similar with 4 no. aluminum busbar cap 200 Amp. Suitable for 415 volt supply requirement. The box shall be fixed robustly with clamps at pole / wall as per requirement. All the material should be of good quality and as per tech. spec. | — | — | — | 68,610 | |
| — | 15.00 | — | — | ||
| Supply, fixing, testing and commissioning of fabricated feeder pillar distribution box made of MS sheet 1.6 mm thick size 600mmX300mmX600mm with suitable MS stand copper bus bar of 200 Amp. Capacity and 2X63 Amp MCB four pole as per technical specification. | — | — | — | 1,02,000 | |
| — | 160.00 | — | — | ||
| SITC of 4 meter length B Class 50 mm dia GI pipe earth station with digging pit & refilling with charcoal & salt as per IS and as per specification. | — | — | — | 2,55,840 | |
| — | 160.00 | — | — | ||
| Construction & supply of earth pit CC furnished chamber 300 x 300 x 250 mm, 50 mm thick with CI/RCC earth pit cover 300 x 300 x 25 mm with lifting hooked in center as per requirement and as per specification. | — | — | — | 1,12,000 | |
| — | 640.00 | — | — | ||
| Supply, laying and fixing of 25 x 5mm GI earth strip at 0.5 meter below ground level or on walls/poles / along pipes etc., including connection / termination with GI nut, bolt, washer etc. as required (jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50 mm). Note:- Suitable GI saddles with screws shall be provided to secure earth strips run on walls /floors etc. | — | — | — | 1,13,280 | |
| — | 54.00 | — | — | ||
| Supply of rotary selector switch suitable for 10 kVA / 25 kVA CLS panel, 4-pole, 6- way, rated for 240 V AC, 50 Hz, of required current rating, complete in all respects as per specification.(Inspection Clause : By Railway Representative) | — | — | — | 2,90,196 | |
| — | 54.00 | — | — | ||
| Erection, testing and commissioning of Rotary selector switch suitable for 10 kVA / 25 kVA CLS panel, 4-pole, 6-way, rated for 240 V AC, 50 Hz, of required current rating. | — | — | — | 14,472 | |
| — | 55.00 | — | — | ||
| Supply of Air break contactors ( 240 V AC., 50 Hz, 2 or 3 Pole as commercially available suitable for 10 kVA/25 kVA CLS panel with 2 NO and 2 NC auxiliary contacts. (Inspection Clause : By Railway Representative) | — | — | — | 4,27,295 | |
| — | 55.00 | — | — | ||
| Erection, testing and commissioning of Air break contactors ( 240 V AC, 50 Hz, 2 or 3 Pole as commercially available suitable for 10 kVA/25 kVA CLS panel with 2 NO and 2 NC auxiliary contacts. | — | — | — | 21,340 | |
| — | 120.00 | — | — | ||
| Supply of 2 Pole, 50 Hz, 63 Amp, 240 V AC, C series Miniature circuit breakers suitable for CLS panel as per requirement. (Inspection Clause : By Railway Representative) | — | — | — | 1,59,480 | |
| — | 120.00 | — | — | ||
| Erection of 2 Pole, 50 Hz, 63 Amp, 240 V A.C, C series Miniature circuit breakers suitable for CLS panel as per requirement. | — | — | — | 7,920 | |
| — | 350.00 | — | — | ||
| Supply of Lighting Emitting diodes (LED) for indication for incoming ,outgoing and auto mode - each colour of reputed make (LED colours as per requirement) | — | — | — | 79,450 | |
| — | 350.00 | — | — | ||
| Erection and testing of Lighting Emitting diodes (LED) for indication for incoming ,outgoing and auto mode -each colour (LED colours as per requirement ) | — | — | — | 3,850 | |
| — | 40.00 | — | — | ||
| SITC of reset micro switch for CLS panel as per requirement. | — | — | — | 8,680 | |
| — | 8.00 | — | — | ||
| Supply, Erection, testing and commissioning of Electronic unit (ECU) cum buzzer suitable for all CLS Panels like 30A,60A,150A as per requirements and suitable for all make CLS panel. | — | — | — | 1,48,848 | |
| — | 65.00 | — | — | ||
| Supply, erection, testing and commissioning of PCB for 30, 60, 150 Amps CLS panel suitable for 03 Nos incoming supply source of 220 volt AC and all make CLS panel with voltage verification 165 volt to 270 volt AC ± 5% and thermal bazzer output and as per requirement. | — | — | — | 3,84,150 | |
| — | 50.00 | — | — | ||
| Supply & erection of 5 m high with single/ double arm model no. BOP-5030 of Bajaj or similar, hot dip galvanized steel octagonal pole with galvanized base plate of 200x200x12 mm, junction box with 6 Amp. MCB and stud terminals (for mounting inside the base compartment of pole), foundation bolt size 4x16mm dia. 600 mm in length including excavation and making foundation as per spec. and drawing. It shall be galvanized internally and externally by single dipping methods. The pole and foundation shall be made as per specification and drawing attached. (Inspection Clause : By Railway Representative) | — | — | — | 4,85,200 | |
| — | 80.00 | — | — | ||
| Erection of octagonal Pole with fixing and installation of street light fitting including labour charges and other expenditure as instructed by site engineer | — | — | — | 49,840 | |
| — | 80.00 | — | — | ||
| Removal of existing Rail / Swage poles from railway ground area. Rail are to be cut 0.5m below the ground level & making the ground level good by suitable cement concrete and transportation of rail pole and all accessories with fitting etc. complete from site to place located at that station by concern SSE/Elect. | — | — | — | 50,800 | |
| — | 2300.00 | — | — | ||
| Supplying and drawing FR PVC insulated & unsheathed flexible 3 Core X 1.5 sqmm PVC Unarmoured copper cable ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. | — | — | — | 1,42,600 | |
| — | 300.00 | — | — | ||
| Supply & fixing of battery-enabled emergency LED tube light fitting, 18-20 W, batten type, 4-feet long, complete with in-built Li-ion battery, providing minimum 04 hours backup including all accessories as per specifications. Reputed Make like Orient, Crompton, Phillips, Surya, Havells, Jaguar, Halonix, Bajaj, Wipro, HPL and Eveready with warranty of minimum 02 years. (Inspection Clause : By Railway Representative) | — | — | — | 3,04,500 | |
| — | 160.00 | — | — | ||
| Supply of material and wiring of LP/TP/FP/Ex.Fan point with 1.5sqmm PVC single core multi-stranded copper wire insulated concealed in stone/brick masonry wall in 19/20 mm PVC conduit with 1.5sqmm PVC wire insulated copper for earth wire 1-way / 2-way switch 5/6A as required and good quality ceiling rose including connection. This item includes modular switch, celling rose, PVC conduit and required chase as per req. | — | — | — | 64,320 | |
| — | 78.00 | — | — | ||
| Supply and fixing 5/6A socket, modular 3/5-pin 230V including modular switch on existing modular board and connection as per site requirement. | — | — | — | 20,280 | |
| — | 40.00 | — | — | ||
| Supply and fixing 15/16A socket, modular 5/6-pin 230V including modular switch on existing modular board and connection as per site requirement. | — | — | — | 11,720 | |
| — | 59.00 | — | — | ||
| Supply and fixing 2 module switch board plate for fixing of modular switches -Socket with sheet metal box of good quality concealed fixing of MS/PVC as per site requirement. | — | — | — | 7,139 | |
| — | 20.00 | — | — | ||
| Supply and fixing 4 module switch board plate for fixing of modular switches - Socket with sheet metal box of good quality concealed fixing of MS /PVC as per site requirement. | — | — | — | 3,640 | |
| — | 70.00 | — | — | ||
| Supply and fixing 6 module switch board plate for fixing of modular switches - Socket with sheet metal box of good quality concealed fixing of MS/PVC as per site requirement. | — | — | — | 15,400 | |
| — | 1800.00 | — | — | ||
| Wiring of sub-main with 2x2.5 sqmm PVC insulated, single core,multi-stranded copper wire in PVC conduit concealed and 2.5sqmm PVC insulated, single core, multi-stranded copper wire for earth wire as per spec.This item includes PVC conduit (25 mm) and chase as per requirement. | — | — | — | 1,31,400 | |
| — | 1400.00 | — | — | ||
| Wiring of sub-main with 2x4 sqmm PVC insulated, single core,multi-stranded copper wire in PVC conduit concealed and 4.0 sqmm PVC insulated, single core, multi-stranded copper wire for earth wire as per spec. This item includes PVC conduit (25 MM) and chase as per requirement. | — | — | — | 1,75,000 | |
| — | 140.00 | — | — | ||
| Supply & Fixing of 36/40W Inverter Street light, Battery-Enabled with Clear Toughened glass having Housing Aluminium PDC, Inverter Load Operation 20-25% of rated system wattage for minimum 4 Hours operation at STC battery fully charged , Battery Used 3.7V Li-ion Battery-BIS compliance cells, RTC based ON/OFF Timing- Factory set pre-programmable Auto ON- OFF, LED-LM 80 certified. LED Lumen Maintenance 50,000 hours @ L70 as per LM 80 report of LED. IS Standard IS 10322 (Part-5/Sec-3) Operating Voltage Range 140V 270 , System Lumen Efficacy 110 lm/W ,Driver Efficiency 85% ,System Protections: Open & Short circuit protection, reverse polarity protection, high voltage cut off at 310V±20V and 5KV Internal Surge, LED Indications-Red Stable- 230V AC available, Green Blinking-Battery Charging, Green Stable-Battery full charge with warranty - 2 Years as per specification. Make- Orient, Crompton, Phillips, Surya, Havells, Jaguar Halonix, HPL, Bajaj, Wipro or similar of reputed make. (Inspection Clause: By RITES. | — | — | — | 11,56,960 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of SPN DB 12 Way with suitable IP protection having 1 No. RCBO 40 Amp Cap., sensitivity 30 mA in the incoming and in outgoing 06 Nos. 10-32 Amp. SP MCB, 10 kA, 'C' curve, 10KA as required with bus bar, neutral bar and necessary wire sets. As per specification. MCB, RCBO and DB should be as per tech spec. and of same make. | — | — | — | 72,540 | |
| — | 80.00 | — | — | ||
| Supply of material, foundation bolts etc. and casting of foundation suitable for 5 Mtrs pole with cement concrete ratio M-20 as per technical specification and satisfaction to site engineer. (Supply of Octagonal Poles are not included in this NS) | — | — | — | 2,36,880 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
T08TenderSpecificationFinal.pdf T08final technical spec
ATTACHMENT
CableCutJPOBikanerDivision.pdf JPO cable cut
ATTACHMENT
TI SPC PSI CLS 0025 CLS panel
ATTACHMENT
UpdatedGCCACSupto11.pdf
ATTACHMENT
T08TenderSpecificationFinal.pdf
ATTACHMENT
CableCutJPOBikanerDivision.pdf
ATTACHMENT
TI-SPC-PSI-CLS-0025-CLSpanel.pdf
ATTACHMENT
T08TenderSpecificationFinal.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .