91(W)/EDCH/2022-23

Amount

FOR SHIFTING OF 33KV LINE DUE TO PARESHAN LINE, AT SWARGASHRAM ROAD HAPUR AND OTHER ASSOCIATED WORKS, IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-I, UNDER EDC., HAPUR (All work will be complete as per sanctioned estimate).

Carriage of line material (like Jointing Kit indoor/outdoor type, channel, agnle, clamp etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of ST Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of 33KV XLPE Cable 3x300Sqmm from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Fabrication, erection and fixing of double pole on ST Pole 11 mtr. long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 33 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Laying of O/D PN-4PE-80 grade UE stabilized HDPE pipe as per IS 4984 of 6meter, for laying of underground 33 KV XLPE Cable as per RESPO/Norms, including cost of above HDPE pipe.

Laying of 33KV XLPE Cable 3x300Sqmm undergound (Double Circuit, 90x2=180mtrs.) into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms.

Laying of 33KV XLPE Cable 3x300Sqmm. And completion of proper work, as per RESPO/Norms.

Laying , Stringing and final sagging of ACSR Dog Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Road restoration charge for footpatch kacha side as per RESPO/Drawing Norms.

Making and filling of 33KV Cable Jointing Kit 3x300Sqmm, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms.

Providing & Fixing of G.I. pipe 6"dia Class-B over 33KV 3x300Sq.mm XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.

Grouting of ST supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Dismantling of old & used ST pole 11mtrs long after digging of pit and opening of all accessories.

Removal of old & used ACSR Dog conductor on existing pole and bundling of the same.

Carriage of old & used STP from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road.

Carriage of old & used ACSR Dog Condcutor(300mtrs.) and 01No. 33kv X-Arm from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road.

Jumpering work properly as per RESPO/Norms.

FOR SHIFTING OF 11KV LINE DUE TO PARESHAN LINE, NEAR 132/33KV SUB-STATION BABUGARH OTHER ASSOCIATED WORKS, IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-I, UNDER EDC., HAPUR (All work will be complete as per sanctioned estimate).

Carriage of line material (like Jointing Kit indoor/outdoor type, channel, agnle, clamp etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Erection & Fixing of PCC Pole 8.5 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Fabrication, erection and fixing of double pole on PCC Pole 8.5 mtr. long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Laying , Stringing and final sagging of ACSR Weasel Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.

Grouting of supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Removal of old & used ACSR weasel conductor on existing pole and bundling of the same.

Carriage of old & used ACSR weasel Condcutor(300mtrs.) from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road.

Jumpering work properly as per RESPO/Norms.

Singh Heavy Electricals

OM CONSTRUCTION COMPANY

M/S YASH TRADERS HAPUR

M/S ABID CONTRACTOR