REPAIRS TO BRICK WORK, GRIT WASH, PLASTERING, RWP, CHAJJA UNDER AGE B/R-I OF GE(W) AGRA

Amount

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

All as per item above but except bricks complete all as specified and directed by Engr-in-Charge Note : Bricks obtained from demolition of brick work shall be reused after cleaning.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound finished other than fair complete all as specified and directed by Engr-in-Charge Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed by Engr-in-Charge

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge

M&L for Preparation of new plastered surfaces of walls and applying applying two coat of distemper oil emulsion (washable) on wall complete all as specified and directed by Engr-in-Charge

Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete (unreinforced) in any position n.exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge

M&L for cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in steps, parapets & railings upto 60cm ht, benching, coping, roof kerbs, mud stop, roof padding, rain water pipe mouth etc and similar work complete all as specified and directed by Engr-in-Charge

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed by Engr-in-Charge

All as per item No above but 20mm bore

S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge

S&F 20mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mm complete all as specified and directed by Engr-in-Charge

S & F 75 mm bore PVC (SWR) bends with complete fittings of any radius complete all as specified and directed by Engr-in-Charge

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm complete all as specified and directed by Engr-in-Charge

S & F 110 mm bore PVC (SWR) bends with complete fittings of any radius complete all as specified and directed by Engr-in-Charge

S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified and directed by Engr-in-Charge

S&F in 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified and directed by Engr-in-Charge

S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified and directed by Engr-in-Charge

M&L for Cutting the roots of trees from the brick walls/stone wall made in cement mortar, exc, half and not exc one brick thick wall and making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engr-in-Charge

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of grade fe-410-0 & fe 310-0 complete all as specified and directed by Engr-in-Charge

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed by Engr-in-Charge

Taking down chowkhats or frames not exc 1.5 Sqm each with shutters complete all as specified and directed by Engr-in-Charge

S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge

S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,min. 3 nos in each door,with tower bolt 200mm 2nos in each door anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge

S&F 4.00 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area n exc 0.5 sqm in each plane complete all as specified and directed by Engr-in-Charge

S&F 4.00 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area exc 0.5 sqm in each plane complete all as specified and directed by Engr-in-Charge

S&F figured sheet glass 3.00mm thick pin headed type and glazing with oil putty complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge

S&F framed work such as grill grating etc with ends of bars shouldered or riveted or forged into spikes frame guard bars etc complete all as specified and directed by Engr-in-Charge

M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth and applying two coat of synthetic enameled paint over one coatof red oxide primer complete all as specified and directed by Engr-in-Charge

Dismantling PVC water tanks exc 250 but n.exc 500ltr capacity complete all as specified and directed by Engr-in-Charge

S&F rotational moulded polyethene water storage tank 500 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug and check nuts complete all as specified and directed by Engr-in-Charge

M&L 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

M&L in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge

Rahul Construction Co (BID ID -3092242)

M/S DEVENDRA KUMAR GUPTA (BID ID -3092083)

M/s S. K. Construction Co. (BID ID -3092112)

M/s Salim Mohomad (BID ID -3089185)

Mahendra Enterprises (BID ID -3091594)

Tulsi Enterprises (BID ID -3084882)

BS CONSTRUCTION (BID ID -3086942)

M/S OMKAR SINGH YADAV (BID ID -3091674)

M/s Kok Singh Sisodia (BID ID -3092000)