PROVISION OF INSTALLATION OF CENTRAL AIR CONDITIONING FOR NEWLY DESIGNATED ROBOTIC OT COMPLEX AT INHS ASVINI UNDER AGE I ASVINI COLABA MUMBAI 3 RD CALL

Amount

Supply, installation, commissioning and testing of air cooled packaged air conditioneers, comprising of hermetic / semi hermetically sealed reciprocating or hermetically sealed scaled scroll compressor with microprocessor based control including copper refirgerant piping electrical interconnection between indoor and out door units suitable for operation on R-22 / R-407c / R-410a refrogerant and normal capacity 8.75 TR complete all as specified and directed. Make : Blue star/Carrier/Daikin

Supply, errect & fabricated rectangular duct made out of 24 SWG GI sheet with TDFflange in L shaped hollow profile including all accessories such as corner, carriage bolt hangers, gasket and seal the longitudinal joints with and including approved sealant complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium powder coated grill for supply air with diffuser complete all as specified and directed

Supply and fixing aluminium powder coated grill for return air with diffuser complete all as specified and directed

Supply and fix nitrile rubber insulation one layer of 25 mm thickness sticking on surface of duct by using approved adhesive and sealing the joints by weather proof tape complete all as directed by Engineer-in-Charge. Make : Armaflex or equivalent as approved

Supply and fixing hepa filters with aluminium anodized frame (down to 1.0 Micron) efficiency 99.97% of size 610mm x 610mm x 156mm below specified specification size 610mmx610mmx156mm gaskets 3mm thick PP foam gaskets will be fixed on both sides of the collor of filter casting 1.6mm thickness aluminium box type casing medica imported submironic micro glass paper efficiency -99.9% down to 1 micron intl specs -EU-9 pressure drop 14mm of WG complete all as specified and directed. Make : Aspawyman/DYNA/MHP as approved

Supply , installation ,fabrication, testing and commissioning of LT Panel board, Factory made cubical type, Outdoor type, floor mounted, factory made out of 40mm x 40mmx4mm angle iron frame and 3 .15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 630 amps rated aluminium bus bar for neutral complete with the following accessories incl Cable Gland & PCC Foundation and Coping taking down old complete all as specified and directed.

BRITE INDUSTRIES

Shree Ayyappa Engineering