SPECIAL REPAIR CUM ADDN ALTN TO BLDG NO WB 89 AND WB 101 16 QTRS AT AIR FIELD AREA UNDER GE MCTE MHOW

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles etc, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No.02, abive, but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F Pressed steel door frame for single door, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm) etc., complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3 mm) of length 30 cm) etc., complete all as specified and directed.

M & L PCC 1:2:4 type B0(12.5 mm graded) aggregate for filling in pressed steel door framed complete all as specified and directed.

S & F 35 mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkat complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F125mm size, butt hinges, heady weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F, double legged door stopper 150 mm long of aluminium alloy with rubber complete all as specified and directed.

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for two coat of synthetic enamel paint on new steel surface of any description over 10 cm in width or girth not otherwise described incl preparation of new steel surfaces complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed.

Taking down old curtain rods/ drapery rods of any description and S&F 25 mm Stainless Steel Curtain rod with premium quality including brackets and other accessories complete all as specified and directed.

S&F powder coated aluminium sliding window three track with two glass shutters using 5 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complete fittings complete all as specified and directed.

S&F powder coating anodised aluminium ventilator , half portion of the ventilator covered with 5.5 mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15 mm thick CM 1:4 of fair finshes including 02 coat of cement based paints with primer incl all fittings , accessories etc complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed.

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.

S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc, complete all as specified and directed.

S&F in repair 15 mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore brass chromium plated sink cock, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm bore pipe complete all as specified and directed.

S&F in repair 15 mm bore brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm bore pipe complete all as specified and directed.

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs Two way stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge .

S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and directed.

S&F Brass Bottle Trap 300 mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced.

S & F vitreous china squatting pan `Orissa` pattern, size 580 x 440 mm white in repairs with integral foot rests (Excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S&F in repairs kitchen plate rack with and including shelves and hanging arrangement for utensil for kitchen, made of stainless steel sheet 0.63mm thick size 30" x 36" x 10" complete as as specifed and directed.

Excavation over areas, n exc 1.5m deep and getting out in soft soil complete all as specified and directed.

Removing excavated soil exceeding 250 m distance and n exc 500 m depositing where directed above the starting point complete all as specified and directed.

Material & labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed.

M&L for providing hard core of broken sand stone /boulders n.exc 63mm gauge, deposited spread and levelled in layers n.exc 15cm thick watered and rammed to true surface complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed.

M&L plain,modular size kiln well burnt sub-class 'B' bricks, exc 6m in mean radius, built in CM (1:4), complete all as specified and directed.

S&F frame work rolled sections as in angle distances pieces, cleats etc complete all as speified and directed of grade FE-410, (gde-E-250) quality complete all as specified and directed.

M&L fo RCC (nominal mix type B-1, 1:2:4 (using 20mm graded stone aggregate ) as in lintels over 1.5m span, complete all as specified and directed.

M&L for brick work with modular size kiln well burnt sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25 mm thick finished surface rough to receive tiliing complete all as specified and directed.

M & L for cement concrete type B-1, 1:2:4 mix (using 20mm graded stone aggregate) in bed blocks, coping etc; including necessary formwork complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L preparation of new/old plastered surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat thick ceiling putty complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of new/old surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl 2 coat wall putty(2mm) complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

M&L preparation of newly surfaces of walls and applying two coats of with Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl two coat (min 2mm thick) wall putty as per manufactor's instructions complete all as directed by Engr-in-Charge.(Note : painting will be done by brush/spray/roller of building upto the height G+2) complete all as specified and directed.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.

S & F 15 mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone, concrete block or slab walls complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.

S & F 20 mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Dismantling PVC water tanks 500 litres capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification .

S & F in repairs factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified and directed.

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed.

S&F Self closing hinges complete all as specified and directed.

S&F in repair Ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed.

S&F in repairs pvc floor trap, with grating 75mm including jointing to waste pipe fixed in cement concrete type B1(1:2:4), in repairs and including waterleak proof treatment complete all as specified and directed.

S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed.

S&F in repairs PVC (SWR) Branch pieces , double (double Y ) equal or unequal of pipe 75 mm bore complete all as specified and directed.

S&F PVC in repairs (SWR) Branch pieces , double (double Y ) equal or unequal of pipe 110mm bore complete all as specified and directed.

M&L for preparation of new/old plastered surfaces and applying one coats of cement base paint on walls complete all as specified and directed.

Dismantling Plain or Corrugated steel sheeting any gauge,thickness ,including Nainital or similar pattern Roof covering complete all as specified and directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F rolled sections as in posts, main and cross beam, hip and jack rafters,purlins,where connected to common rafters (beam,tee,angle ,channel pipes , tubes, plates and flat sections etc)including distances pieces ,cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410,(gde-E-250) quality A all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

All as per item No.98, above but exc 1.50 M depth not exc 3.00 m depth complete all as specified and directed.

Removing excavated soil exceeding 250 m distance and n exc 500 m depositing where directed above the starting point complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming with soil in layers n exc 25 cm thick complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe of 200mm bore dia pipe set in cement mortar complete all as specified and directed.

M &L for concrete bed PCC 1:3:6 type C-2 using 40mm graded stone aggregate to drain pipe 200/225 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land complete all as specified and directed. Note : Thickness of bed below the barrel of pipe 10cm for pipe 100 mm and 150mm dia, 15cm for 200mm dia & over

M&L for 200 ID/220 OD MM dia DWCPE SN-8 pipes premium quality single socketed in length with joints laid in trenches or in floors including all necessary fitting , joints etc,complete all as specified and directed. Make-ISI marked approved.

M&L for Precast RCC (1:2:4), type B1 (using 20mm graded stone aggregate) as in manholes cover slab (including necessary formwork) with two handles of mild steel round bar 10/12 mm dia, made to shape, set in CM (1:4) , including demolition of existing cover slab complete all as specified & directed. Note :- Reinforcement shall be measured and paid for seperately.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for 15 mm thick rendering in CM (1:4) on other than fair faces of brick work finished even and fair without using extra cement complete all as specified and directed.

Demolition of RCC in roof, beams, landing, chajja, cover slab and similar suspended work complete including separating of iron sheet bars etc all as specified and directed & removing rubbish outside MD area as directed by Engr-in Charge.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls as in soak well and septic tank etc complete all as specified and directed.

Ues & Waste of form work to soffits of suspended slabs such as flat roof slabs, floor slabs n exc 200mm thick finished fair or curved concrete surface complete all as specified and directed.

M&L for Water proofing treatment on "Non approachable/ non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal of existing treatment and testing complete. (i) Surface prepration like opening the cracks/ removal of loose concrete. (ii) Pressure washing the entire roof to remove dirt, dust alage fungi or other contaminants from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores , capillaries and micro cracks. (iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of dr fixit URP with fiber mesh (vii) First and Second coat of elastomeric dr fixit Roof Seal . The authorized applicators are under :- (i) P Tech Solutions 92 Anurag Nagar Ring Road Indore (II) MR clean Ventures E-4/402 Arera Colony Bhopal 462016 (iii) Property care, 244 D scheme No 71 Near Shriji Vatika indore 452002 Note : Guarantee for 10 years shell be furnished.

Please Enable Macros to View BoQ information