ADDN / ALTN TO KITCHEN IN BUILDING NO P-6 AND P-7 AT HQTC BANGALORE AND SPECIAL REPAIRS TO ROOF SHEET FALSE CEILING AND ADJOINERY WORKS AT CERTAIN TMQS AT HQ TC (U)

Amount

M&L PCC 1:3:6 type C-2 (using 20mm graded stone aggregates) foundation fillings,PCC bed and mass concrete etc complete all as specified and directed.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 etc complete all as specified and directed

M&L for providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, etc complete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls type C1 1:3:6 (20mm graded aggregate) with solid blocks, and setting in cement mortar 1:6, etc complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutter as in windows and ventilators open rebated and prepared to receive glass, gauge etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8 clause 8.24(b) ® kiln seasoned and chemically pressure treated etc complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated etc complete all as specified and directed.

S&F of 35mm thick IInd class factory made plain, framed, pannelled shutters (any number of panels) factory made with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.

M & L 40mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frames )of any description n.exc.1.50 sqm each removing to or from store complete all as directed etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each etc complete all as specified and directed

Taking down Shutters of any description n exc 1 sq. m each etc complete all as specified and directed

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each etc complete all as specified and directed

Refixing of wooden shutters in same opening not exceeding 1Sq.m. each all as specified and as directed. (Note :`refixing' includess taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc all as specified and as directed.

Refixing of wooden shutters in same opening exceeding 1Sq.m. and not exceeding 2 Sqm each all as specified and as directed. (Note :`refixing' includess taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc all as specified and as directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site etc complete all as speicfied and directed

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F designer UPVC window/ventilator including frame work and all accessories like-handle/tower bolt/hinges/lock/glass etc complete, as colour approved by GE complete all as specified in SSR Part-I etc complete all as specified and directed

S & F 18mm thick soild UPVC board/ply of 1st quality of one side prelaminated of approved colour and another side of any colour fixed with and incl screwes, solvent cement, adhesive,PVC/UPVC beading as required to make kitchen cabinet and cup board shutters, etc complete all as specified and directed.

S & F 15mm thick soild UPVC board/ply of 1st quality of both side plain white colour fixed with screwes, solvent cement/ adhesive,PVC/UPVC beading as required to make shelves partitions and drawers etc for kitchen cabinet and cup board, complete all as specified and as directed.

S & F 12mm thick soild UPVC board/ply of 1st quality of both side plain white colour fixed with screwes, solvent cement/ adhesive,PVC/UPVC beading as required to make kitchen cabinet and side top and bottom shelves inside the cabinet and shutter or drawer, complete all as specified and as directed.

S&F for 125mm aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F for 200mm aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel etc complete all as specified and directed

S&F 125mm long Butt hinges, medium weight, cold rolled mild steel, etc complete all as specified and directed

S&F 125mm Aluminium handles, cast type anodised etc complete all as specified and directed.

S&F 150mm Aluminium handles, cast type anodised etc complete all as specified and directed.

S&F in 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat etc complete all as specified and directed.

S & F coloured powder coated mild steel continous (Piano) hinge with of flaps (when open) is 30mm complete all as specified and as directed.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat etc complete all as specified and directed.

S&F in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section etc complete all as specified and directed.

S&F in repairs 25mm dia mild steel powder coated, fancy type curtain rod etc complete all as specified and directed.

S & F 150mm long hasp and staple, safety type mild steel brass hing pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed

S&F in repairs Galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed

Mild steel, plain, black sheet 1 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required® etc complete all as specified and directed

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws etc complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper etc complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc. etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) etc complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size 400mm x 400mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match etc complete all as specified and directed.

All as per item above but as in wall skirting including 10mm thick rendering of CM 1:4 and pointed in white/ coloured cement to match all as specified..

M&L for glazed ceramic coloured/digital tiles in vertical surface 350x250mm x 7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4 etc complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size 300mm x 300mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match all as specified.

M&L for 20-22mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl dismantling existing surface complete as specified and as directed

M&L Glazed colour ceramic tiles in vertical surface of size 300mmx600mm x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M&L for Vitrified Ceramic colour tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and as directed.

M & L Screed bed or bedding layer of cement mortar, 15mm thick for laying floor tiles in CM 1:4 etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 with on fair faces of brick work or concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.

One coats of white wash on old decorated surfaces of walls including necessary preparation of surfaces all as specified and as directed.

M&L for Two coat of Distempering on wall surfaces with oil emulsion distemper white or tinted over a coat of 1mm thick wall care putty and a coat of primer ivncluding necessary preparation of new surface of wall etc complete all as specified and as directed.

M&L for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces all as specified.

Two coats of cement based paint on walls, pillasters, cornices, etc., including necessary prepration of old finished surfaces all as specified and as directed

Complete removal existing tretment on walls washing, rubbing down and stopping of existing treatment applying two coats oil bound emulsion distemper using rollers to match with existing surface all directed.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old decorated surface of ceilling including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

S&F sheet glass, of 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane etc complete all as specified and directed.

S&F sheet glass, of 3mm thick ordinary quality, ground or obscured or frosted, on one side in square n.exc 0.5 Sqm in each pane etc complete all as specified and directed.

Hacking out old broken glass of any thickness and description from wooden/ metal frames fixed with wooden beads/ putty all as specified and as directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

One coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats etc complete all as specified and as directed.

M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described etc complete all as specified and directed

One coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

S&F soap Dish complete all as specified and as directed. Make-Jaguar Code No- AQN-7731 or equivivalent make in CERA/ Hindware

S&F Towel ring square with round flange complete all as specified and as directed. Make-Jaguar Code No-ACN-CHR-7721 or equivivalent make in CERA/ Hindware

S&F in repair stainless steel shower basket large size complete all as specified and as directed. Make-Jaguar Code No- CAN-CHR-1179N or equivivalent make in CERA/ Hindware

S&F in repair Towel rail of 600 mm long complete all as specified and as directed. Make-Jaguar Cat No-AHS-1507 or equivivalent make in CERA/ Hindware

S&F in repair glass shelf of 600 mm long with chromium plated bracket complete all as specified and as directed. Make-Jaguar Cat no-CAN-1171N or equivivalent make in CERA/ Hindware

S&F in repair soap Dispenser complete all as specified and as directed. Make-Jaguar Code No- ACN-CHR-1135 N or equivivalent make in CERA/ Hindware

S&F kitchen utensil rack in steel made of premium grade stainless steel and highly durable and rust-proof of size not less than 90cmx80cmx20cm etc complete all as specified and directed.

S&F PVC Gratings size 125 mm dia complete all as specified & directed.

M & L 15 mm dia GI pipe medium grade with all fittings and fixed to wall /laid in floor complete incl taking down old pipe etc complete all as specified and as directed.

~ditto~ all as per item No 82 herein above but 20 mm dia etc complete all as specified and directed

S& F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed with wall including necessary fixing cleats/ clamps, complete incl taking down all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete incl taking down all as specified and directed.

S&F PVC bends of 110 mm dia complete all as specified and directed.

S&F PVC bends of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed

S & F stainless steel (SS-304) cup saucer basket of size 15"x20"x4" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F stainless steel (SS-304) Thali basket of 21"x20"x8(Ht)" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F stainless steel (SS-304) plain basket of size 19"x20"x4" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F stainless steel (SS-304) Cutlery basket of size 15"x20"x4" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F stainless steel (SS-304) large utensil basket of size 32"x20"x8" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F stainless steel (SS-304) perforated bottle basket of size 15"x20"x6" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F sliding telescopic channel high grade mild steel, bright finish or electrogalvanised of size 20" as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F stainless steel handle of 110mm of size as per approved sample complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S & F maganetic catcher for kitchen cabinet shutters as per approved sample complete all as specified and as directed.

S & F soft closing hinges high grade mild steel bright finish or electrogalvanised as per approved sample for kitchen cupboard, shutters complete all as specified and as directed. Make: Haffle/Hettich/Ultrafresh/Kitchen gold

S&F in repair stainless steel (SS-304) sinks with double bowl of overall size 45inch x 20 inch and 8 inch depth for kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall complete all as directed. Make Nirali /Blue star/Prayag

S & F in repairs single lever Sink Mixer (Table mounted) with extractable hand shower Dual Flow complete with 1.2 mtr long tube with 450 mm long Braided Hoses complete all as directed Make: Jaquar-FLR-CHR-5177B.

S&F in repairs kitchen utensil rack in steel made of premium grade stainless steel (SS-304) and highly durable and rust-proof of size not less than 90cmx80cmx20cm complete all as specified. Make: Blue star/ Nirali/Prayag.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles etc complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Demolition cement concrete in ground floor and paving not exceeding 15 cm thickness (below of above ground level) un-reinforced complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Dismantling boarding, any description(wall pannelling/ ceilling/ linning/ cladding/ partition etc.) fixed in any position with nails/screw complete all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering etc complete all as specified and directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings complete as directed and removing retrieved materials and making good the disturbed surface all as specified and as directed.

Taking down Exhaust fan, ceiling cable end, dismantaling blades, and removing fan including painting and refix the same including connecting up and provision of cable from ceiling rose or connector to fan all as specified and directed.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC conduit ISI marked as approved with all accessories and fixing arrangements on wall/ceiling on wall including 3mm thick new hylum sheet top cover /PVC gang box fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light point controlled by one single pole 5 Amps switch

One fan/ exaust fan point controlled by one single pole 5 Amps switch

One switch socket out let point 5 Amps on independent board

One switch socket out let point 5 Amps on same board with other switches

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC Conduit ISI marked, with all accessories and fixing arrangements on wall/ceiling surface on wall including new 3mm thick hylum sheet top cover/PVC gang box fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for one 15A Switch Socket Combination on independent board all as specified and as directed.

M&L for Chasses cutting in wall/ ceiling for point wiring complete all as specified and as directed.

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.

Supply and fixing modular swich, single pole one way 6 Amps, 230 volts all as specified

Supply and fixing modular socket, 6 Amps 2/3 pin combined two module, 230 volts all as specified

Supply and fixing of fan regulator upto with 5 step speed control for fans any sweep all as specified.

Supply and fixing modular white cover suitable with frame 4 module complete all as specified and as directed. .

Supply and fixing modular white cover suitable with frame 8 module complete all as specified and as directed. .

Supply and fixing modular metal flush board 4 module complete all as specified and as directed.

Supply and fixing modular metal flush board 8 module complete all as specified and as directed.

S&F Wall mounted fan 400mm with oscillation complete with all fixing accessaries complete all as specified and as directed.

Supply and fixing LED lights fitting 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

SRI GANESH ENTERPRISES

SB CONSTRUCTIONS

Power and Telecom Systems

G.M.R.& CO

GKR and CO

Raashi Constructions

mahadevi Enterprises

SLN ENTERPRISES