Renovation of House No. 13B, Officer Colony No. 2 at Gurugram

Amount

Laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand). Ordinary cement without any pigment(HSR 10.30.4) Labour Rate

Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to sqm be laid below the topping.(HSR 10.4)

Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm (HSR 10.63.2) (Labour Rate)

Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm(HSR 10.63.3) (Labour Rate)

Laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.(HSR 10.59) (Labour Rate)

Laying and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(HSR 10.62) (Labour Rate)

Lying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge: Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent (HSR 10.49.1) (Labour Rate)

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) .25 mm thick(HSR 12.27.2)

Providing and fixing Pre-laminated flat pressed 3 layer (medium density)particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) .18 mm thick(HSR 12.27.1)

Providing and fixing stainless steel baskets of various size in various judicial house complete in all respect as per detail given below:- (NS) (i) Cutlery 17''x20''x4''

(ii) Multi Basket 17''x20''x6''

(iv) Grain Trolley 17''x20''x12''

(v) Bottle pull out 10''x20''x8''

(vi)Plate 17''x20''x8''

(vii) Cup& saucer 17''x20''x4''

(viii) Carrousal 27''

(ix) Edge biding

Fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. (HSR 12.34) (Labour Rate)

Fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.150 mm(HSR 12.64.1) (Labour Rate)

Fixing chromium plated brass handles with necessary screws etc. complete: 125 mm(HSR 12.94.1) (Labour Rate)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete.Hot finished welded type tubes(HSR 13.30.1)

Providing and Fixing Poly Carbonate Sheet 1.25mm thickness on Gates and grills excluding the cost of MS framework but including the cost of nut bolts, Welding rods complete in all respect as per direction of Engineer-in Charge.(HSR 13.20)

Fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISi marked white solid plastic seat and lid(HSR 22.24.1) (Labour Rate)

Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous chinaware W.C pan and cistern.(HSR 22.31)

Fixing in position vitreous chinaware white lavatory suites ofapproved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm(HSR 22.221.2) (Labour Rate)

Fixing Stainless Steel A ISi 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510 mm bowl depth 200 mm(HSR 22.10.2.1) (Labour Rate)

Fixing PTMT towel rail complete with brackets fixed to woodencleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (HSR 22.119.1) (Labour Rate)

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.(HSR 22.211)

Fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.(HSR 22.127) (Labour Rate)

Fixing brass bib cock of approved quality: 15 mm nominal bore(HSR 22.96.1) (Labour Rate)

Fixing brass bib cock of approved quality: 20 mm nominal bore(HSR 22.96.2) (Labour Rate)

Fixing brass stop cock of approved quality: 15 mm nominal bore (HSR 22.97.1) (Labour Rate)

Fixing C.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter (HSR 22.102.1) (Labour Rate)

Fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.(HSR 22.38) (Labour Rate)

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISi : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.(HSR 22.182) 2 Nos.

Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1 :4 (1 cement : 4 coarsesand) C.I. cover with frame (light duty) 455x61 O mm internal dimensions, totalweight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1: 1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1 : 3 ( 1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay non-modular bricks of class designation (HSR 22.179.1.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore(HSR 22.88.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore(HSR 22.88.2)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipe conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter(HSR 9.57.2)

Providing and fixing on wall face Unplasticised - PVC moulded fittings/accessories for Unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. Single push fit Coupler 110 mm (HSR 9.58.2.2)

Planking of commercial hard wood, such as Hollock, champ, chikrassy andchaplash etc., (Non-coniferous timber other than teak conforming to I.S.specification no.1003 kiln seasoned) planed on both sides, rebated and fixed in position, including nails and screws, etc: Planking of commercial hard wood, such as Hollock, champ, chikrassy and chaplash etc., (Non-coniferous timber other than teak conforming to I.S.specification no.1003 kiln seasoned) planed on both sides, rebated and fixedin position, including nails and screws, etc:(HSR 12.24.3)

Providing and fixing Pre-laminated flat pressed 3 layer (medium density)particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior gradeIS : 12823 marked, in shelves with screws and fittings wherever required,edges to be painted with polyurethane primer (fittings to be paid separately) 18 mm thick (HSR 12.27.1)

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} Kiln seasoned and chemically treated Hollock wood 30 mm thick shutters(HSR 12.7.2.2)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm,for doors, windows and clerestory windows with hinges and necessary screws: 30 mm thick shutters with ISi marked M.S. pressed butt hinges bright Kiln seasoned and chemically treated Hollock wood(HSR 12.19.1.2)

Providing and fixing ISi marked flush door shutters conforming to IS : 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws(HSR 12.37.1)

Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Doors @400/- Each

Wire Guage @ 350-Each Note 1 :-In case of any difference in the unit & nomenclature of any of the HSR/DSR items of civil,PH work depicted in this DNIT and that given in HSR,the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (Make/brand exhibited in HSR/DSR and exhibited in approved standard documents) as approved by the Engineer-in-charge,while executing various items/work at site. 3. The agency to whom the work is allotted have to produce original bill/ voucher for all qty in taken of proof of Purchase of material

Rohit Kumar