Providing for aluminium partition Separate lab and doctor room and storeroom shed and painting works at Solai Alagu puram UPHC in ward 83

Amount

Dismantling the existing damaged Floor Tiles and Wall Tiles including removal of demolish materials and all labour charges and conveyance charges etc.complete.., PWD-SOR- DATA-P-22-SL No:W-0042

Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962 and should be got approved by the Executive Engineer before use.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes (Frame : Section-101.60 x 44.45 x 3.18mm @ 2.399Kg/m, Shutter : Top,Middle,Vertical style - 50 x 44.45 x 2.5mm @ 1.292 Kg/m, Bottom - 100 x 44.45 x 2.5mm @ 1.974Kg/m) for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification MDU-CORP-BUILDING DATA-P-21-SL No:10

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work MDU-CORP-BUILDING DATA-P-44-SL No:60

Painting old wall surface with Two coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour. MDU-CORP-BUILD-DATA-P-55-Sl-87

Supplying and fixing in position of best approved colour design and quality FRP sheets of 1.5mm thick with necessary 'U' or 'J' bolts, bitumen washers and cutting the FRP sheets to the required size.etc. complete.

Fabriction supply and erection of tobulor post with Truss (100mm, 80mm, 75mm) The Rate shall be include the cost of tobulor post Truss members, labour charges for manufacturing and erection and Painting etc., complete. as per departmental specification and drawings.

Wiring with 2 x 2.50 Sq.mm PVC unheated sc Aluminium cable of 650 V. grade in suitable PVC rigid pipe in wall on ceiling with PVC assceries with T.W. switch box in flush with wall covered with hylum sheet 3mm thick with painting of suitable colour with 14 S.W.G.T.C wire for light point and fuse point (SD 20 A) Light point

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set TWAD-DATA-P- -SL No:

Supply and fixing of 20W 4 Feet LED fitting with LED. TWAD-DATA-P- -SL No:

Add GST 18%

N NALLATHAMBI (BID ID -1085019)