Concrete flooring works for two wheeler parking area outside time gate in Helicopter Division HAL HC

Providing and laying design mix cement concrete of M-30 grade manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars shall be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.

Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)

Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements Using grade 'A' sealing compound conforming to IS: 1834 etc, all complete as per direction of the Engineer-in-Charge.

Supplying, fabrication and fixing in position of TMT reinforcement bars of grade Fe-500D or more for R.C.C work upto plinth level including straightening, cutting, bending, hooking, cranking, placing in position, lapping wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including all lead and lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc.., all complete as per directions of the engineer in charge of the work.

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.

Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. all complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.

Approximate Amount put to the tender (Basic)

HD/CM-PM/CIVIL/WO464/24-25

CONCRETE FLOORING WORKS FOR TWO WHEELER PARKING AREA OUTSIDE TIME GATE IN HELICOPTER DIVISION, HAL(HC).

Description

Name of the Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

MSME Registered Firm: YES/NO

Size Of Firm ( Infrastructure ): MICRO/SMALL/MEDIUM/LARGE

Owner Of Firm: SC/ST/WOMEN/SCST WOMEN/OTHERS

Address for correspondence:

PAN No.:

PF Registration No./ Code:

ESI Registration No./ Code:

Goods and Service Tax Registration No. (GST No)

Contact details

Registered Contractor

Related Document to be Uploaded to eProcurement Portal * Category: E=75 Lakhs-Less than 100 lakhs F=50 Lakhs-Less than 75 lakhs G=25 Lakhs-Less than 50 lakhs H=10 Lakhs-Less than 25 lakhs I= 5 Lakhs-Less than 10 lakhs J= 2 Lakhs-Less than 5 lakhs K= Less than 2 Lakhs

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Audited Report duly certified by the Chartered Acountant to be enclosed to support the turn over .

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

Related Document to be Uploaded to eProcurement Portal

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Tender Document Cost and EMD details

Related Document to be Uploaded to eProcurement Portal

Validity Of the Offer

If not agreed please mention Validity Period

Acceptance of Work Completion Shedule

If not accepting, deviaton to be mentioned in detail

Acceptance of Tender Scope,Terms & Conditions

If not accepting, deviaton to be mentioned in detail

Statutary Reqirments

If not agreed the offer will be rejected

Details of Daviations if any

Tender Clause Refernce

DECLARATION