Bangalore Division: KSR Bengaluru: Improvements to kitchen of 18 units, toilet of 8 units and wardrobes of 21 units of Type-V quarters in Nandi Colony (Qrts. No. 368(A-F), 362 (A-F), 401 (A-F), 384 (A-F), 357(A-B)). SW-II: KSR Bengaluru: Improvements to Officers Rest House at KSR Bengaluru (Total 12 units - 6 Maples and 6 main ORH). Maintenance period is 6 months. COMPOSITE TENDER.

SCHEDULE B1 - SW-I NON-SCHEDULED ELECTRICAL ITEMS - IMPROVEMENTS TO TYPE-V QRTS -

S No. Item No Description of Item Unit Qty Rate Amount

1 1 Supply and Wiring for circuit/ sub main Running 400.00 268.00 107200.00

wiring alongwith earth wire with Metre

2x1.5Sq.mm+ 1x1.5Sq.mm earth wire of

FRLS PVC insulated copper conductor ,

single core cable in surface/recessed

medium class PVC conduit/casing and

capping including supply and laying of PVC

conduit/casing and capping with all

accessories like round block, ceiling rose,

flexible wire for connecting lights,fan

fittings etc as per specification. ( PVC

conduit/casing and capping to be used as

per site condition.)

2 2 Supply and Wiring for circuit/ sub main Running 1300.00 385.00 500500.00

wiring alongwith earth wire with 2x4 Metre

Sq.mm + 1x4Sq.mm earth wire of FRLS

PVC insulated copper conductor , single

core cable in surface/recessed medium

class PVC conduit/casing and capping with

cable termination using suitable crimping

socket including supply and laying of PVC

conduit/casing and capping. Vertical Runs

of Light & Fan Circuit can be bunched with

Circuit mains by suitable Junction Boxes as

per specification( PVC conduit/casing and

capping to be used as per site condition.)

3 3 Supply and Wiring for circuit/ sub main Running 350.00 505.00 176750.00

wiring alongwith earth wire with 2x6 Metre

Sq.mm + 1x6Sq.mm earth wire of FRLS

PVC insulated copper conductor , single

core cable in surface/recessed medium

class PVC conduit/casing and capping with

cable termination using suitable crimping

socket including supply and laying of PVC

conduit/casing and capping. ( PVC

conduit/casing and capping to be used as

per site condition.)

4 4 Groove cutting & Fixing of above conduit Metre 450.00 22.00 9900.00

duly concealed in wall / ceiling

5 5 Supply and provision of modular type Numbers 36.00 503.00 18108.00

surface box for 8 modules complete with

mountingcover plate including all auxiliary

6 6 Supply and provision of modular type Numbers 34.00 285.00 9690.00

surface box for 4 modules complete with

mounting cover plate including all

auxiliary accessories .

7 7 Supply and provision of 6A SP modular Numbers 100.00 55.00 5500.00

switches ISI marked

8 8 Supply of 6A 3 pin modular socket with Numbers 36.00 182.00 6552.00

safety shutter ISI marked

BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

9 9 Supply of 6/16A 6 pin multipin modular Numbers 72.00 508.00 36576.00

socket with safety shutter and 16A switch

with LED indication ISI marked

10 10 Supply and provision of 4 module MCB Numbers 16.00 533.00 8528.00

protected plug and socket of 25A rating

with SP mini MCB and all necessary

accessories complete

11 11 Supply and installation of electrical Numbers 18.00 24990.00 449820.00

kitchen chimney of air suction capacity

1500CMH with stainless steel 430 body of

1mm thick , baffle filter , 90cm width,

blower body, blades & filter made out of

aluminium, flexible aluminium exhaust

pipe of 3 mtrs length, soft touch control

panel including all necessary accessories

for fixing as per site condition.

12 12 Supply and fixing of 20 Watt , 230 Volt AC Numbers 18.00 429.00 7722.00

supply ,50 Hz batten type aluminium

extruded 4 feet LED light fitting along with

lamp& driver with all connected

materials( Ceiling rose, round

block,screws,guttas, round flexible wire

e t c . ) a n d conforming to specification

No.SWR /LED LIGHT FITTING(Indoor/Out

,50 Hz batten type aluminium extruded 2

feet LED light fitting along with lamp

&driver with all connected materials(

Ceiling rose, roundblock,screws,guttas,

round flexible wire etc.) and conforming

tospecification No.SWR /LED LIGHT

FITTING(Indoor/Outdoor)/011-2016 dt

14 14 Supply and installation of storage type Numbers 16.00 11300.00 180800.00

water Geyser of 25 litres capacity, BEE 5

star rated with ABS body, stainless steel

tank , pressure safety relief valve, as per

IS 2082:2018 latest , 2 meter cable with 3

pin plug 16A with all necessary

accessories for fixing.

15 15 Supply of heavy duty metal Exhaust fan of Numbers 16.00 2349.00 37584.00

sweep 200mm including frame,clamps and

all accessories for fixing as per site

16 16 Installation of exhaust fan in the existing Numbers 16.00 476.00 7616.00

opening as per site condition .

Schedule Schedule B1-SW-II NON-SCHEDULED ELECTRICAL ITEMS - SBC-IMPROVEMENTS TO ORH

Item- 9 SCHEDULE B1 - SW-II NON-SCHEDULED ELECTRICAL ITEMS - SBC-IMPROVEMENTS TO ORH

S No. Item No Description of Item Unit Qty Rate Amount

1 1 Supply and installation of IP43 , 8 way SPN Numbers 12.00 2478.00 29736.00

DB made out of CRCA sheet steel ,powder

coated with insulated phase busbar, color

coded interconnecting wire set , locking

arrangement complete suitable for

provision of DP MCB/isolator/RCCB/RCBO

asincomer and SP MCBs as outgoings

including all accessories for fixing as per

site condition.

2 2 Supply and Provision of DP MCB of 6A-32A Numbers 12.00 670.00 8040.00

rating with short circuit breaking capacity

3 3 Supply and provision of DP RCCB of 25A Numbers 12.00 2429.00 29148.00

rating having sensitivity of 100/30mA

BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

4 4 Supply and Provision of SP MCB of 6A-32A Numbers 48.00 192.00 9216.00

rating with short circuit breaking capacity

5 5 Supply and Wiring for circuit/ sub main Running 1500.00 279.00 418500.00

wiring alongwith earth wire with Metre

2x1.5Sq.mm+ 1x1.5Sq.mm earth wire of

FRLS PVC insulated copper conductor ,

single core cable in surface/recessed

medium class PVC conduit/casing and

capping including supply and laying of PVC

conduit/casing and capping with all

accessories like round block, ceiling rose,

flexible wire for connecting lights,fan

fittings etc as per specification. ( PVC

conduit/casing and capping to be used as

per site condition.)

6 6 Supply and Wiring for circuit/ sub main Running 750.00 400.00 300000.00

wiring alongwith earth wire with 2x4 Metre

Sq.mm + 1x4Sq.mm earth wire of FRLS

PVC insulated copper conductor , single

core cable in surface/recessed medium

class PVC conduit/casing and capping with

cable termination using suitable crimping

socket including supply and laying of PVC

conduit/casing and capping. Vertical Runs

of Light & Fan Circuit can be bunched with

Circuit mains by suitable Junction Boxes as

per specification( PVC conduit/casing and

capping to be used as per site condition.)

7 7 Supply and Wiring for circuit/ sub main Running 500.00 525.00 262500.00

wiring alongwith earth wire with 2x6 Metre

Sq.mm + 1x6Sq.mm earth wire of FRLS

PVC insulated copper conductor , single

core cable in surface/recessed medium

class PVC conduit/casing and capping with

cable termination using suitable crimping

socket including supply and laying of PVC

conduit/casing and capping. ( PVC

conduit/casing and capping to be used as

per site condition.)

8 8 Groove cutting & Fixing of above conduit Metre 1500.00 25.00 37500.00

duly concealed in wall / ceiling

9 9 Supply and fixing of modular type Numbers 24.00 637.00 15288.00

concealed metal switch box for 12

modules complete with mounting cover

plate of suitable colour& texture as per

site condition including all accessories.

10 10 S u p p l y and fixing of modular type Numbers 24.00 445.00 10680.00

concealed metal switch box for 8 modules

complete with mounting cover plate of

suitable colour& texture as per site

condition including all accessories.

11 11 Supply and fixing of modular type Numbers 24.00 210.00 5040.00

concealed metal switch boxes for 4

modules complete with mounting cover

plate of suitable colour& texture as per

site condition including all accessories.

modular switches ISI marked

13 13 Supply and fixing of modular bell push Numbers 12.00 154.00 1848.00

switch ISI marked

14 14 Supply and provision of 6A SP modular Numbers 200.00 152.00 30400.00

switches ISI marked

15 15 Supply and provision of 6A modular socket Numbers 96.00 194.00 18624.00

with safety shutter ISI marked

BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

16 16 Supply and provision of 6 / 16A modular Numbers 36.00 716.00 25776.00

multi pin socket with ISI mark, safety

shutter and 16A switches with neon

indication with ISI mark.

17 17 Supply and provision of 4 module MCB Numbers 24.00 554.00 13296.00

protected plug and socket of 25A rating

with SP mini MCB and all necessary

accessories complete

18 18 Supply and provision of mechanical key Numbers 12.00 1344.00 16128.00

tag switch of 32A , 2M

19 19 Supply and provIsion of LED foot lamp Numbers 24.00 597.00 14328.00

with 4 module box and cover

20 20 Supply,installation, Programming and Numbers 24.00 9722.00 233328.00

commissioning of wireless ceiling/wall

mounted wireless battery powered passive

infrared (PIR) sensor that automatically

control lights/other loads via RF

communication to compatible dimming

and switching devices with all necessary

accessories. The sensors should not

interfere with any other wireless devices

21 21 Supply, installation, programming and Numbers 12.00 10289.00 123468.00

commissioning of Standalone single circuit

switching module ( relay for above

sensor)of 16/20A capacity mounted in the

true ceiling/wall. This should not interfere

with any other wireless devices

22 22 Supply and provision of infrared motion Numbers 4.00 1208.00 4832.00

sensor 360 degree detection, range upto

12m distance , IP 20 ,capacity upto 300W

with all necessary accessories.

23 23 "Installation and commissioning of Split AC Numbers 12.00 2075.00 24900.00

(Excluding accessories )as instructed by

SSE incharge .The scope of work includes

the following. a) Mounting/Fitting of indoor

and outdoor units at the respective

locations. b) Laying of refrigerant piping

and connecting with indoor and outdoor

units after drilling hole/holes in the wall, if

required. c) Charging Refrigerant gas in

the unit. d) Suitable electric wiring

between indoor unit and switch upto 3

meters length. e) Testing for satisfactory

working without any abnormal noise as

well as leakage test of entire system.

24 24 Supply and provision of call bell suitable Numbers 12.00 109.00 1308.00

work with single phase 230V supply

25 25 Supply and fixing of aesthetically designed Numbers 24.00 3000.00 72000.00

5 star rated 1200 mm sweep BLDC ceiling

fan with suitable electronic regulator, fan

hooks with all necessary accessories as

per specification

surface/recess mounted type down light

fitting along with lamp & driver, proper

clamping/fixing arrangements based on

site condition with all connected materials

conforming to Specification No.SWR /LED

LIGHT FITTING(Indoor/Outdoor)/011-2016

27 27 Supply and fixing of 3W LED reading lamp Numbers 12.00 755.00 9060.00

with all acessories ( necessary approval is

to beobtained from SSE inchrage duly

supplying sample fitting)

28 28 Supply and provision of aesthetically good Numbers 24.00 2325.00 55800.00

looking wall lamp with LED lamp fitting

with all necessary accessories.

BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

29 29 Supply and fixing of aesthetic LED mirror Numbers 12.00 1721.00 20652.00

light of 10/12Watts with driver and all

necessary accessories.

30 30 Supply and installation of storage type Numbers 12.00 8924.00 107088.00

water Geyser of 15 litres capacity, BEE 5

star rated with ABS body, stainless steel

tank , pressure safety relief valve, as per

IS 2082:2018 latest , 2 meter cable with 3

pin plug 16A with all necessary

accessories for fixing.

31 31 Supply and fixing of modular type Exhaust Numbers 12.00 1325.00 15900.00

fan of sweep 150mm including clamps and

all necessary accessories for fixing

32 32 Design, supply and erection of earthing Numbers 4.00 4442.00 17768.00

arrangement with 50mm dia, class C, GI

p i p e as per draw ing and specification

including all auxilliary accessories

33 33 Supply and extension of earth continuity Metre 100.00 23.00 2300.00

from earth pit to metering bunk by 8 SWG

GI wire including all auxilliary accessories.

Item Breakup - A-SW-III DSR-2021 - BNC - BRIGHTENING AND OTHER REPAIR WORKS TO RAIL HOUSE.

2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 10.0 STEEL WORK 10.2 Structural steel work riveted, bolted or Kg 325 111.95 36383.75 welded in built up sections, trusses and framed work, including cutting, hoisting, 20 fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, 10.16 fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 21 10.16.1 Hot finished welded type tubes Kg 650 154.9 100685 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 10.28 Providing and fixing stainless steel ( Grade Kg 100 612.25 61225 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & 22 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.16S TILE FLOORING Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with 11.20 pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20.2 Medium shade pigment using 50% white Sqm 50 1160 58000 23 cement 50% Grey cement 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with 11.41A grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of 11.41A.2 size 24 11.41A.2.2 Size of Tile 600 x 1200 mm Sqm 30 1612.75 48382.5 11.45 Providing and laying 500x500x40 mm Sqm 50 1613 80650 thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate 25 and base course and filling with 150 mm thick local sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) 11.56 thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Sqm 45 3908.8 175896 26 Black, Cherry/Ruby Red or equivalent 12.0 ROOFING Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick 12.40 cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 27 12.41.2 110 mm diameter Metre 20 319.75 6395 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 28 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 140 282 39480 13.16S 6MM CEMENT PLASTER 13.17 6 mm cement plaster 1:3 (1 cement : 3 Sqm 200 334.2 66840 fine sand) finished with a floating coat of 29 neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris Sqm 150 214.3 32145 putty of 2 mm thickness over plastered 30 surface to prepare the surface even and smooth complete. Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 31 13.61.1 Two or more coats on new work Sqm 50 131.45 6572.5 Applying priming coats with primer of approved brand and manufacture, having 13.85 low VOC (Volatile Organic Compound ) content. Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 32 13.98.1 One or more coats on old work Sqm 600 90.85 54510 Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 33 13.99.1 One or more coats on old work Sqm 200 86.55 17310 Finishing walls with Premium Acrylic 13.112 Smooth exterior paint with Silicone additives of required shade BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 13.112.1 Old work (Two or more coats applied @ Sqm 400 108.6 43440 34 1.43 ltr/ 10 sqm) over existing cement paint surface 14.0 REPAIRS TO BUILDING 14.72S FINISHING 14.72 Providing and fixing double scaffolding Sqm 200 285 57000 system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it 35 there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 5 2007.1 10035.5 36 equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 5 2928.1 14640.5 mechanical means including stacking of 37 steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and 15.9 disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 38 15.9.2 In cement mortar cum 5 2027.1 10135.5 Dismantling tile work in floors and roofs 15.23 laid in cement mortar including stacking material within 50 metres lead. 39 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 35 60.5 2117.5 15.56 Dismantling old plaster or skirting raking Sqm 100 45.05 4505 out joints and cleaning the surface for 40 plaster including disposal of rubbish to the dumping ground within 50 metres lead. 16.0 ROAD WORK 16.49S MISCELLANEOUS 16.68 Providing and laying 60mm thick factory Sqm 50 951 47550 made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & 41 shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 16.69 Providing and laying at or near ground cum 10 8613.55 86135.5 level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints 42 except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). 17.0 SANITARY INSTALLATIONS Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 17.10 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 43 17.10.2.1 610x510 mm bowl depth 200 mm Each 1 4274.4 4274.4 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 44 18.9.3 25 mm nominal dia Pipes Metre 20 370.65 7413 45 18.9.6 50 mm nominal dia Pipes Metre 20 811.85 16237 Total 2335556.50

Item Breakup - A-SW-II DSR-2021 - SBC-IMPROVEMENTS TO ORH

2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 10.0 STEEL WORK 10.28 Providing and fixing stainless steel ( Grade Kg 250 612.25 153062.5 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & 12 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with 11.41A grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of 11.41A.2 size 13 11.41A.2.1 Size of Tile 600 x 600 mm Sqm 150 1359.2 203880 14 11.41A.2.3 Size of Tile 800 x 800 mm Sqm 120 1544.2 185304 Glazed Vitrified tiles Matt/Antiskid finish of 11.41A.3 size 15 11.41A.3.1 Size of Tile 600 x 600 mm Sqm 50 1311.05 65552.5 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) 11.56 thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Sqm 15 3908.8 58632 16 Black, Cherry/Ruby Red or equivalent 12.0 ROOFING Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC 12.42 rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long 12.45 G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain Sqm 30 1145.95 34378.5 17 board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 12.45.3 12.5 mm thick tapered edge gypsum Sqm 200 1300.5 260100 18 moisture resistant board 13.0 FINISHING 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 19 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 450 294.35 132457.5 Wall painting with acrylic emulsion paint of 13.60 approved brand and manufacture to give an even shade : 20 13.60.1 Two or more coats on new work Sqm 50 137.85 6892.5 Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 21 13.61.1 Two or more coats on new work Sqm 35 131.45 4600.75 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Varnishing with varnish of approved brand 13.67 and manufacture : 13.67.1 Two or more coats of glue sizing with Sqm 10 197.4 1974 22 copal varnish over an under coat of flatting varnish Applying priming coats with primer of approved brand and manufacture, having 13.85 low VOC (Volatile Organic Compound ) content. Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 23 13.98.1 One or more coats on old work Sqm 800 90.85 72680 Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 24 13.99.1 One or more coats on old work Sqm 40 86.55 3462 13.103 French spirit polishing : 25 13.103.1 One or more coats on old work Sqm 15 185.4 2781 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 15 2007.1 30106.5 26 equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 15 2928.1 43921.5 mechanical means including stacking of 27 steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of 15.7 unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 28 15.7.4 In cement mortar cum 25 1698.45 42461.25 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 29 15.12.1 Of area 3 sq. metres and below Each 40 302.7 12108 Dismantling tile work in floors and roofs 15.23 laid in cement mortar including stacking material within 50 metres lead. 30 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 180 60.5 10890 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 31 18.7.3 25 mm nominal dia Pipes Metre 90 408.55 36769.5 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 32 18.8.2 20 mm nominal dia Pipes Metre 110 513.75 56512.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c 18.36 necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.36.1 With common burnt clay F.P.S.(non Each 2 9630.65 19261.3 33 modular) bricks of class designation 7.5 22.0 WATER PROOFING 22.5 Providing and laying water proofing Sqm 130 516.6 67158 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) 34 Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 22.6 Providing and laying water proofing Sqm 125 585.55 73193.75 treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of 35 slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. Total 2513596.02

Item Breakup - A-SW-I DSR-2021 - IMPROVEMENTS TO TYPE-V QRTS - NANDI COLONY

2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.169 Providing and fixing 19mm thick both side Sqm 40 2339.6 93584 balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand 21 boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. 10.0 STEEL WORK 10.1 Structural steel work in single section, Kg 200 93.05 18610 fixed with or without connecting plate, 22 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2 Structural steel work riveted, bolted or Kg 200 111.95 22390 welded in built up sections, trusses and framed work, including cutting, hoisting, 23 fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, 10.16 fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 24 10.16.1 Hot finished welded type tubes Kg 300 154.9 46470 11.0 FLOORING 11.16S TILE FLOORING Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with 11.20 pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20.2 Medium shade pigment using 50% white Sqm 50 1160 58000 25 cement 50% Grey cement 11.37S CERAMIC GLAZED TILES 11.37 Providing and laying Ceramic glazed floor Sqm 70 935.6 65492 tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, 26 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved 11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 27 11.41.4 Size of Tile 1000x1000 mm Sqm 100 2551.95 255195 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with 11.41A grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of 11.41A.2 size 28 11.41A.2.2 Size of Tile 600 x 1200 mm Sqm 240 1612.75 387060 12.0 ROOFING Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick 12.40 cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 29 12.41.1 75 mm diameter Metre 50 213 10650 30 12.41.2 110 mm diameter Metre 100 319.75 31975 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC 12.42 rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.5 Bend 87.5 degrees 31 12.42.5.1 75 mm bend Each 10 91.8 918 32 12.42.5.2 110 mm bend Each 10 132 1320 12.42.6 Shoe (Plain) 33 12.42.6.2 110 mm Shoe Each 10 115.95 1159.5 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel 12.47 rovigs incorporating minimum 0.3% ultra- violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.47.1 2 mm thick corrugated (2.5" or 4.2" or 6") Sqm 100 1179.25 117925 34 or step-down (2" or 3" or 6" ) as specified 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 35 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 30 282 8460 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris Sqm 800 214.3 171440 putty of 2 mm thickness over plastered 36 surface to prepare the surface even and smooth complete. Wall painting with acrylic emulsion paint of 13.60 approved brand and manufacture to give an even shade : 37 13.60.1 Two or more coats on new work Sqm 100 137.85 13785 Applying priming coats with primer of approved brand and manufacture, having 13.85 low VOC (Volatile Organic Compound ) content. Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 38 13.98.1 One or more coats on old work Sqm 5000 90.85 454250 Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 39 13.99.1 One or more coats on old work Sqm 5500 86.55 476025 14.0 REPAIRS TO BUILDING Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and 14.1 preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine Sqm 50 462.3 23115 40 sand) 14.72S FINISHING BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 14.72 Providing and fixing double scaffolding Sqm 100 285 28500 system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it 41 there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. 14.75AS ROUTINE MAINTENANCE WORK 14.79 Disconnecting damaged overhead/terrace Each 5 357.55 1787.75 PVC water storage tank of any size from 42 water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. 14.82 Dismantling W.C. Pan of all sizes including Each 16 110.7 1771.2 disposal of dismantled materials i/c malba 43 all complete as per directions of Engineer- in-Charge. 14.84 Dismantling 15 to 40 mm dia G.I. pipe Metre 100 2.85 285 including stacking of dismantled pipes 44 (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall 14.85 Taking out existing wooden door shutter, Each 40 325.95 13038 repair by cutting, painting etc. and refixing of repaired door shutters to existing door 45 frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in- charge. 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 5 2007.1 10035.5 46 equivalent design mix) Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 47 15.12.1 Of area 3 sq. metres and below Each 40 302.7 12108 Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 48 15.13.1 Of area 3 sq. metres and below Each 40 118.3 4732 Dismantling tile work in floors and roofs 15.23 laid in cement mortar including stacking material within 50 metres lead. 49 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 500 60.5 30250 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 15.56 Dismantling old plaster or skirting raking Sqm 250 45.05 11262.5 out joints and cleaning the surface for 50 plaster including disposal of rubbish to the dumping ground within 50 metres lead. 16.0 ROAD WORK 16.49S MISCELLANEOUS 16.68 Providing and laying 60mm thick factory Sqm 300 951 285300 made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & 51 shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 17.0 SANITARY INSTALLATIONS Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 17.10 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 52 17.10.1.1 510x1040 mm bowl depth 250 mm Each 18 6008.45 108152.1 Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 53 17.28.2.1 32 mm dia Each 35 104.35 3652.25 17.81 Providing and fixing floor mounted, white Each 16 16100.4 257606.4 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 54 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 55 18.7.3 25 mm nominal dia Pipes Metre 45 408.55 18384.75 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 56 18.8.2 20 mm nominal dia Pipes Metre 100 513.75 51375 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 57 18.9.6 50 mm nominal dia Pipes Metre 40 811.85 32474 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 58 18.17.1 25 mm nominal bore Each 9 532.35 4791.15 59 18.17.4 50 mm nominal bore Each 9 878.25 7904.25 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 60 18.18.3 25 mm nominal bore Each 9 399.15 3592.35 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.1 30 cm length 61 18.21.1.1 15 mm nominal bore Each 50 74.8 3740 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all Litre 2000 9.7 19400 floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and 62 suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long body bib cock of approved quality conforming to 18.51 IS standards and weighing not less than 690 gms. 63 18.51.1 15 mm nominal bore Each 20 708.4 14168 22.0 WATER PROOFING BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY 22.5 Providing and laying water proofing Sqm 50 516.6 25830 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) 64 Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 26.86 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 65 26.86.5 Frame size 65 x 100 mm Metre 80 1000.15 80012 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 26.88 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 66 26.88.1 30 mm thick Sqm 27.5 4327.7 119011.75 Total 5303536.61

Item Breakup - B-SW-II NON-SCHEDULED ITEMS - SBC-IMPROVEMENTS TO ORH

Providing and fixing 75 mm dia PVC soil Metre waste vent pipes including jointing and cot of spun yarn sand etc

Providing and fixing 110 mm dia PVC soil Metre waste vent pipes including jointing and cot of spun yarn sand etc

supplying and fixing MDF board 18mm tk Square of approved quality and design in the Foot required pattern on ceiling/walls/partitions with contractors men,materials,lead,lift etc as directed by the eng in charge.9

Supplying and fixing Korean frosted film as Sqm per design

Supplying and fixing BED BACK DROP Sqm using 19mm com ply with necessary niches as per dwg.Cost to include finishing with veneer and making provision for diffused lighting.etc.., (Rate analysis enclosed)

Column Paneling with leveling frame made Sqm of 2" x 2" sal wood frame covered with 8mm ply and finished in imm laminate having grooves,wooden beading and 4" laminate skirting as per DWG. The ply surface shall be finished neatly with laminate of 1mm thick of approved colour and make with necessary beading as per design. Gyp edges shall have L aluminium channel .

Wall Paneling using 1"x2" salframe Sqm covered 6mm comply for curved /plain surfaces finished neatly with VENEER to match conference room table veneer. To include cost for Melamine, grooves etc.. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Providing and painting with TEXTURE paint Sqm of approved sample inclusive of primer, putty and color as per instructions architects/ consultantsBasic price 75 per sft

Supply and fixing cots of size 6'x6'- Numbers 6''made of 19mm block board ,finished with approved laiminate as per dwg including transport ,delivery and fixing charges etc.. as directed by the Eng in charge .

Supply of king size spring Mattress Numbers 6''thick, spring well,duroflex,kurlon or any other equivalent brand 6,x6,-6''or nearer size as approved by the Eng in charge

STUDY TABLE-supply and fixing of study Numbers table 4'x2'0" made of 19mm ply finished in Venner,with necessary drawer box,including handles etc complete as per dwg. (Rate analysis enclosed)

NEW WARDROBES-Providing and fixing of Sqm box type wardrobes 2'deep made of 19mm block board finished in laminate internally and externally with necessary hardware complete as per dwg. Shutters shall be finished in veneer and shall be melamined. (Rate analysis enclosed)

LUGGAGE RACK-(3'x2'x2'-6'' or nearer Numbers size)Providing and fixing of luggage stand using beech frame and 19mm ply covered with venner (Rate analysis enclosed)

TV UNIT-(4'x3' or nearer size)Providing Sqm and fixing of 19mm block board finished with laminate internally and veneer externally with necessary hardware complete as per dwg. shutter/drawer shall be veneer and shall be melamined. Basic cost of Veneer 120 per sft (Rate analysis enclosed)

WALL PAINTINGS-supplying and fixing of Numbers wall painting .

BIG SIZE-3'x3' or nearer

Centre tableProviding and fixing of side & Numbers centre tables, made of 4"x2" wooden supports with 12mm thick beveled glass top.2'x2'size or near size

BEDSIDE STORAGE UNITS-Supply and Numbers fixing Low height storage of 1'6"' height , 2'0" width and 1'6"depth using 19mm ply for skeleton, and finished in Veneer with necessary hardware etc.., as directed by the Eng in charge(Rate analysis enclosed)

Providing and fixing Roller blinds with Sqm necessary accessories, as per color selected by Eng in charge(Rate analysis enclosed)

S&F in position mirror glass of thickness 5 Sqm mm on to the wall over wash basin with necessary rear packing between glass and wall using 6mm thick wooden sheet and crews etc., complete all with contractor's materials, labour, tools etc., as directed by the Engineer-in-charge

Providing and fixing of fully up holsterd Numbers sofas single seater with SS legs. The basic price of fabric /leatherite to be Rs 350/ Rmt. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supply of Bedside synthetic/ woolen Numbers carpet 4'x2' or nearer size of approved quality and design as approved by the Eng in charge

CHAIR-Supplying of Workstation chairs Numbers with Medium Back equavalent to Featherlite CONTACT nylon with Hydraluic gas lift ,mutlipoint locking,foam mesh and fabric as per architects

Supply and fixing wall mounted EWC to Numbers Hindware/Parryware or similar with necessary fixing materials with contractors men, materials and as directed and approved by the Engineer-in-charge

Slim concealed cistern body with floor Each mounting frame & installation kit model no CIB-WHT-31801011 XF Jaguar make (92/14/7170/1/65717 dt 2/12/14) with Control plate reflet 360 frosted green chrome model no CIJ-CHR-31199219 jaguar make

Supply & fixing of angle stop cocks of Numbers approved quality c p coated jaquar, ARK, plumber, CMCO or similar to queen series cat .No. 7053, complete as approved & directed by the Engineer - in - charge.

Supply and fixing table top(above counter) Numbers wash basin Hindware/Parryware/Jaquar make or similar of approved quality as directed by the Eng in charge Basic price of Wash basin Rs 5000/each

supplying and fixing Toughened sandwich Sqm laminate glass 6+6mm thick of approved quality,design and colour with all fixing accessories at all heights with contractors men and materials etc complete.., as approved by the Eng in charge

Supplying, commissioning CP shower unit single lever divertor ,Jaguar make,with shower arm long heavy casted body with Over head shower & Spout , Hand Shower with Rail with CP wall flanges etc., complete.

S&F brass CP coated towel rail 18 inches Numbers or nearer size of Jaquar Ark or similar to queen series as aproved by Engg in Charge

S&F brass CP coated towel rack 24 inches Numbers of Jaquar Ark or similar to queen series as approved by Engg.in Charge

S&F brass CP coated toilet paper holder of Numbers Jaquar or ARK Nova or similar to queen series as approved by Engg.in Charge

Supplying and fixing brass with CP coated Numbers with toughened glass shelf 18'' to 24'' inches as approved by the Eng in charge

Supplying and fixing stainless steel grating Numbers as approved and directed by the Eng in charge

Supplying of FRP/GRP bath stool of Numbers approved colour as directed by the Eng in charge

Supplying and fixing brass with CP coated Numbers soap dish of approved quality as approved by the Eng in charge BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supplying and fixing brass with CP coated Numbers Health faucet jaquar or similar make of approved quality as approved by the Eng in charge

Supplying and fixing brass with CP coated Numbers two way bib cock foam flow jaquar or similar make of approved quality as approved by the Eng in charge

Supply of Stainless steel Dust bin of 18'' or Numbers nearer size as approved by the Eng in charge

Supply of Door/Floor mat 3'x2' or nearer Numbers size made up of Arcalic/woolen/synthetic material as approved by the Eng in charge

P&F veneer 4mm thick of approved colour Sqm and design as approved by Engg in Charge(basic cost of veneer 120/Sqft)

Supply of Good quality lock of approved Each shade and design as approved by Engg in Charge

Supply of good quality brass handle of 1ft Each or nearer size ,of approved shade and design as approved by Engg in Charge

Supply of good quality brass handle of Each height 6" or nearer ,of approved shade and design as approved by Engg in Charge

Supply of brass tower bolt 10" or nearer of Each approved shade and design as approved by Engg in Charge

Supply of brass tower bolt 6" or nearer of Each approved shade and design as approved by Engg in Charge.

Supply and fixing laminate sheet 1mm Sqm thick for flush door of approved colour as approved by engg in charge

Supplying and fixing Wall panelling using Sqm

dwg.Cost to include finishing with laminate and making provision for diffused lighting.etc..,

Supplying transparent sheet of approved colour, design at all levels including contractor's men, materials etc. complete as approved by Engineer in charge. Total 6601481.59

Item Breakup - B-SW-I NON-SCHEDULED ITEMS - IMPROVEMENTS TO TYPE-V QRTS - NANDI COLONY

Providing and fixing of box type ward Sqm robes 2' deep made of 19mm block board finished in laminate internally and externally with necessary hard wares as per drg

Loft Shutters :Providing and fixing loft Sqm shutters using 19mm ply wood /block board finished in laminate internally and externally with necessary hardware complete including the wooden frame with contractors men and materials in all floors etc as approved and directed by Engg in charge BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Kitchen Cabinet (Below Counter):Providing Sqm and fixing of box type modular kitchen cabinets made of 19mm plywood/block board finished in laminate internally and e x t e r n a l l y with necessary hardware complete with contractors men and materials in all floors etc as approved and directed by Engg in charge

Kitchen Cabinet :(Above Counter)Providing Sqm and fixing of box typemodular kitchen cabinets with necessary shelfs/partitions made of 19mm plywood/block board finished in laminate internally and e x t e r n a l l y with necessary hardware completewith contractors men and materials in all floors etc as approved and directed by Engg in charge

Supply of Half bottle rack right angle Each Kitchen Stainless steel (304 Grade) wire basket 480mm(W) x 505mm (D) x 150mm(H) Ebco make or similar including all hardware required as directed by Engg in Charge.

Supply Stainless steel(304 Grade)wire basket 480mm(W) x 505mm (D) x 80mm(H) Ebco make or similar including all hardware required as directed by Engg in Charge

Supply Stainless steel(304 Grade) wire basket 500mm(W) x 505mm (D) x 135mm(H) Ebco make or similar including all hardware required as directed by Engg in Charge.

Supply of Dinner set Kitchen Stainless Each steel(304 Grade) wire basket 600mm(W) x 505mm (D) x 140mm(H) Ebco make or similar including all hardware required as directed by Engg in Charge.

Supply of Linea box 2 sided 500mm (D) x Set 104mm(H) Ebco make or similar The set should have 2 lateral sides 104mm height logo cover cap front connector ,front fixing stabilizer pin etc including all hardware required as directed by Engg in Charge.

Supply of Thali Right angled kitchen Set Stainless steel 304Grade wire basket 430mm(W)x505mm (D) x 200mm(H) Ebco make or similar etc including all hardware required as directed by Engg in Charge.

Supply & Fixing of Godrej/Hittich or similar Set make Soft close telescopic channel (Runner) of size 500mm (20") as approved and directed by Engg in Charge.

Providing and painting with TEXTURE paint Sqm of approved sample inclusive of primer, putty and colour as per instructions architects/consultants.

S&F Brass CP coated towel rail 18 inches Numbers or nearer size of Jaquar Ark or similar to queen series

Supplying and fixing stainless steel grating Numbers as approved and directed by Engg. In charge

Supplying and fixing brass with CP coated Numbers Health faucet Jaquar or similar make of approved quality as approved by Engg. In charge BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supplying and fixing brass with CP coated Numbers two way bib cock foam flow Jaquar or similar make of approved quality as approved by the Engg. In charge

Supply and Fixing Table top (above Each counter) washbasin Hindware /Parryware/Jaquer make or similar of approved quality including CP piller tap of approved design, bottle trap etc as directed by EIC

Supply & fixing of angle stop cocks of Each approved quality c p coated jaquar, ARK, plumber, CMCO or similar to queen series cat .No. 7053, complete as approved & directed by the Engineer - in - charge

Providing and fixing down PVC pipes of Metre 150mm dia at all heights including contractors labour clamps, all specials and connections etc as directed by the Eng-in- charge

Supply and fixing of CP coated SS Piller Each cock o f 15mm bore as approved by engg in Charge

Supplying and fixing CP soap dish of Each approved quality as directed by the Eng incharge

Supply and fixing good quality brass Each handle of 6" or nearer size of approved shade and design as approved by the Eng in charge

Supply and fixing over head shower rose Each with revolving joint and 150mm long swivel shower arm brass with powder coated VEEPEE make or similar make etc complete as directed by engineer in charge

Supply of brass tower bolt10'' or nearer of Each approved shade and design as approved by the Eng in charge

Supply of brass tower bolt 6'' or nearer of Each approved shade and design as approved by the Eng in charge

Supplying and fixing good quality lock of Each approved shade and design as approved by the Eng in charge

Providing and fixing 110mm dia PVC soil Metre waste vent pipes including jointing and cot of spun yarn sand etc

Providing and fixing 75 mm dia PVC soil Metre waste vent pipes including jointing and cot of spun yarn sand etc

Providing & fixing precast Cement cum concrete solid block Grade C (5.0) specification confirming to IS 2185-2005 in foundation & plinth with 1:6 cement mortar including cost of centering, s h u t t e r i n g using contractor's men, materials tools & plant complete as directed by EIC .

Providing & fixing precast Cement cum concrete solid block Grade C (5.0) specification confirming to IS 2185-2005 upto floor 2 level with 1:6 cement mortar including cost of centering, shuttering using contractor's men, materials tools & plant complete as directed by EIC BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Providing & fixing precast Cement cum concrete solid block Grade C (5.0)specification confirming to IS 2185- 2005 above floor 2 level for every floor or part thereof with 1:6 cement mortar including cost of centering, shuttering using contractor's men,materials tools & plant complete as directed by EIC

Hiring of truck Total 14503272.40 Schedule B-SW-III NON-SCHEDULED ITEMS - BNC - BRIGHTENING AND OTHER REPAIR WORKS TO