Construction of post matric girls hostel at Railway station Road, Tumkuru Town, Tumkuru District (BCWD 2444) under NABARD RIDF Tranch-30

Construction of post matric girls hostel at Railway station Road, Tumkuru Town, Tumkuru District (BCWD 2444) under NABARD RIDF Tranch-30

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

In ordinary/soft rock without blasting, Depth exceeding 1.5 m, but not exceeding 3 m consider 25% of total excavation qty

Earth work excavation for FOUNDATION by Mechanical means depth

upto 1.50m, as per drawing and technical specifications, including

setting out, shoring, strutting, barricading, caution lights, includin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, b...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position plain cement concrete for levelling

course for all works in foundation. The granite/trap/basalt crushed

graded coarse aggregates and fine aggregates as per relevant IS...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)-

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works

& super structure works of bridges upto 3.50 m height. The ...

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,

high water absorbant single extruded WPC (Wood PolymerComposite) solid

plain flush door shutter of required size comprisi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,

high water absorbant single extruded WPC (Wood PolymerComposite) solid

plain flush door shutter of required size comprisi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,

high water absorbant single extruded WPC (Wood PolymerComposite) solid

plain flush door shutter of required size comprisi...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete-

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete-

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete-

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete-

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete-

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete-

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete-

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete-

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete-

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5mm.(heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5mm.(heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5mm.(heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5mm.(heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5mm.(heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5mm.(heavy type)

Providing and fixing MS Hold fasts

Providing and fixing MS Hold fasts

Providing and fixing MS Hold fasts

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off co...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off co...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off co...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. O...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. O...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. O...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. O...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufactur...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufactur...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufactur...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of ex...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of ex...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of ex...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of ex...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing, laying & fixing cement base, precast, pre polished cement

concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles

for flooring, treads of steps and landing, laid on a bed...

Providing and laying flooring and steps fine dressed granite stone slabs

40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with

cement mortar 1:3 over existing cement concrete bed , inclu...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,

including applying priming coat of approved steel primer....

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15

cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,

laid to slope compacting, including cost of materials, labour, cur...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15

cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,

laid to slope compacting, including cost of materials, labour, cur...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15

cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,

laid to slope compacting, including cost of materials, labour, cur...

Providing and laying in position Reinforced cement concrete for all

Sub structures of building, Irrigation works, Sub structure works of

bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all

Sub structures of building, Irrigation works, Sub structure works of

bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all

Sub structures of building, Irrigation works, Sub structure works of

bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all

Sub structures of building, Irrigation works, Sub structure works of

bridges, Drain works & other parallel works from 0.50m to 3.50 ...

High Density Polyethylene Membrane water proofing Providing and laying water proofing treatment to the Rafts, Below grade

slab, Lift pits, water retaining structures with fully bonded High Density

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...

Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm ...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm ...

INTERNAL WATER SUPPLY & SANITORY WORK : Earth work excavation for Foundation by manual means for all Buildings,

Bridges, Retaining walls, Abutment Piers and such similar works

as per drawing and tech...

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations and other similar works etc. in layers not exceeding

20cm in depth, consolidating each deposited layer by r...

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer)

pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is

UV stabilized and anti-microbial fusion welded, having thermal...

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer)

pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is

UV stabilized and anti-microbial fusion welded, having thermal...

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer)

pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is

UV stabilized and anti-microbial fusion welded, having thermal...

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer)

pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is

UV stabilized and anti-microbial fusion welded, having thermal...

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour.

600 mm long towel rail wit...

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting

of fittings and brackets, cutting and making good the wa...

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 25 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 40 mm nominal bore

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 455x610 mm internal

Providing and fixing square mouth SW gully trap class sp 1 complete with ci gratings brick masonery chamber 100 x 100 mm size p type with non modular common burnt brick of designation 3.5 & water ti...

Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete , including cost of cutting and making good for walls and floors 100mm inlet and...

Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 g.

Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and placing on terrace polyethylene water storage tanks as per IS : 12701 : 1996 with manhole lid and suitable locking arrangements, aking holes of suitable diameter for inlet, outlet and ov...

EXTERNAL WATER SUPPLY & SANITORY WORK : Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to li...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 50 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 65 mm nominal bore

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 455x610 mm internal

Earth work excavation for Foundation by manual means for all Buildings,

Bridges, Retaining walls, Abutment Piers and such similar works

as per drawing and technical Specifications, including setting o...

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations and other similar works etc. in layers not exceeding

20cm in depth, consolidating each deposited layer by r...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

NON SR ITEM Supplying and fixing of liquid soap dispenser with glass bottle fixed on wooden cleats with CP brass screws & washers including driling hole in walls with drill gun and making good the wa...

Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour f...

Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, covering the top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rung...

Supplying and fixing of Robe hook Fixed on the toilet Door as directed by the Engineer in charge.

Supplying, fixing, testing and commissioning of 15mm dia CP Long body Bib Cock (wall mounted model) for wash area with CP wall flange etc.

Providing & fixing of CP waste coupling 32mm Size full thread for Truf.

Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by applicati...

Supplying , installing, testing and commissioning of brass body nickel plated automatic air release valves with brass splindle, NBR and joinfraniteelastomer,staniless steel spring polypropylenic ...

Supplying and fixing in position solid block masonry pedestals of approaximate size 400x230x230mm with brackets and G.I clamps for laying pipes on terrace. etc,. complete as directed by the Engineer i...

Providing, fixing, testing and commissioning of PVC gullytrap of 150 x 150 mm size with 100 mm dia outlet making excavation pit in all kinds of soil and laying of 100 mm thick 1:4:8 mix cement concret...

Providing, fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet...

Providing & fixing of brass Y' / pot strainer screw type tested to 20 kg / sq.cm.

SUMP TANK : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

In ordinary/soft rock without blasting, Depth exceeding 1.5 m, but not exceeding 3 m consider 20% of total excavation qty

Earth work excavation for FOUNDATION by Mechanical means depth

upto 1.50m, as per drawing and technical specifications, including

setting out, shoring, strutting, barricading, caution lights, includin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, b...

Providing and laying in position plain cement concrete for levelling

course for all works in foundation. The granite/trap/basalt crushed

graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

KSRB 12-6.2: Providing 20mm round M.S. footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

DISMANTLING WORKS : Demolishing R.C.C. work manually/ by mechanical means including

stacking of steel bars and disposal of unserviceable material to the

appropriate disposal area as per direction of E...

Demolishing cement concrete manually/ by mechanical means including

disposal of material to the appropriate disposal area as per direction

of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (...

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material

to the appropriate disposal area as per direction of Engineer-in-...

Dismantling dressed stone work ashlar face stone work, marble work

or precast concrete work manually/ by mechanical means including

stacking of serviceable and disposal of unserviceable material to th...

Dismantling doors, windows and clerestory windows (steel or wood)

shutter including chowkhats, architrave, holdfasts etc. complete and

stacking to the appropriate disposal area as per direction of Eng...

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material to the appropriate disposal area as per direction of

Engineer-in-charge. For thickness of tiles above 25 mm ...

Dismantling C.I. or asbestos rain water pipe with fittings and clamps

including stacking the material to the appropriate disposal area as per

direction of Engineer-in-charge. 100 mm dia pipe

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China)

including stacking of useful materials near the site and disposal of

unserviceable materials to the appropriate disposal area as ...

Dismantling weather proof course and removing and conveying the

debris to a distance to the appropriate disposal area as per direction of

Engineer-in-charge. water proofing

Loading and Unloading of Stone Boulder/Stone or brick, aggregates/Sand/cement/

Kankar/Moorum. (Tipper 10 m3)

Loading and Unloading of Cement or Steel by Manual Means and

Dismantling steel work manually/ by mechanical means in built up

sections without dismembering and stacking to the appropriate disposal

area as per direction of Engineer-in-charge.

Internal Electrification Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick conforming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc.,and fixing using inverted ...

Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick conforming to IS 2509 with suitable size bends,metal/PVC junction boxes,adhesive paste etc.,and running before slab. The conduit shoul...

Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick conforming to IS 2509 with suitable size bends,metal/PVC junction boxes,adhesive paste etc.,and running before slab. The conduit shoul...

Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick conforming to IS 2509 with suitable size bends,metal/PVC junction boxes,adhesive paste etc.,and running before slab. The conduit shoul...

Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick with suitable size bends,metal junction boxes,adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and...

Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick with suitable size bends,metal junction boxes,adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and...

Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 1...

Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 4...

Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 6...

Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 8...

Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 1...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

Supplying 4 mm thick plastic sheet with necessary nitches for fixing switches regulators etc, and fixing on existing wooden / metal box using N.F screws.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS

multi strand PVC insulated copper wir...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS

multi strand PVC insulated copper wir...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS

multi strand PVC insulated copper wir...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS

multi strand PVC insulated copper wir...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS

multi strand PVC insulated copper wir...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plat...

Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying , fixing and wiring Residual Current Circuit Breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood / panel board. 63 Amps 4 Pole, 300mA

UPS & BATTERIES Make : Emerson / APC 2KVA offline UPS

UPS & BATTERIES Make : Emerson / 150 AH capacity

Supplying and drawing PVC flexible one pair telephone unarmoured tinned Copper cable of approved make. TELEPHONE WORKS & DATA WORKS Telephone Cable 2 Pair

Supplying and drawing PVC flexible one pair telephone unarmoured tinned Copper cable of approved make. TELEPHONE WORKS & DATA WORKS Telephone Cable 5 Pair

Supplying and drawing PVC flexible one pair telephone unarmoured tinned Copper cable of approved make. TELEPHONE WORKS & DATA WORKS Telephone Cable Supplying and Drawing UTP-CAT - 6E LAN Cable

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. and M.S.flat .. with bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. and M.S.flat .. with bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Fabricating supplying and mounting MS box made out …. SWG suitable for floor / wall mounting , fully weather poof with provision for better heat dissipation, provided with hinged front cover, equip...

Supplying, fixing and wiring of earth electrode for grounding of lifts, Transformers DG Sets etc, using 40mm dia 2.9 mm thick 2.5 meter long GI pipe with GI nnel with mesh & suitable size reducer fixe...

Supply and Installation of Conventional type, 5 segment 50mm dia hollow copper spike (air termination rod) for lightning protection with copper down rod and necessary fixing hardware as per IS 2309, 1...

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required.(KPWD SR 2019-2020 /I.No.6.3.1, 6.3.2 /Pg.No.40). GI Stripe a) 25 X 3 mm GI strip

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required.(KPWD SR 2019-2020 /I.No.6.3.1, 6.3.2 /Pg.No.40). GI Stripe a) 25 X 6 mm GI Strip

Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 /...

Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 /...

Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 /...

Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 /...

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. a. 450 X 50 mm

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V...

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V...

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V...

Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, requ...

Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, requ...

Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder

coated prewired to mains connector ...

Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder

coated prewired to mains connector ...

Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, requ...

Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder

coated prewired to mains connector ...

Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder

coated prewired to mains connector ...

Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, requ...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Supplying wall mounting Fan suitable to operate at single-phase 230V AC supply . 400 mm Sweep

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

a)Supplying exhaust fan of 1440 RPM of 300mm (12" ) size with bracket blades complete for light duty suitable to operate on 230v 50Hz , AC Supply…

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

Supplying , fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 HZ AC with latest microcontroller based, digital readout of pecentage leakage curre...

Supplying & fixing of shunt trip suitable for MCCB.CBCT .

Supplying , fixing of LED type panel board indicating lamp with required colour suitable for 230/440v AC 50Hz 12/24v DC.

Supplying , fixing and wiring 0 to 600 Volts 96x96 mm AC Voltmeter on exising panel / woodboard .

Supplying , fixing and wiring rotary selector switch suitable for Voltmeter .

Supplying , fixing and wiring 3 Phase Digital Ammeter

Supplying , fixing and wiring rotary selector switch suitable for Ammeter

Supplying , fixing and wiring 50/5 to 400/5 Amps 5 VA burden current Transformer .class 0.5 accuracy tape wound

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.

Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal M...

Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal M...

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with

hinged front cover, equipped...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required . 25 x 6 mm

Main LT Panel UG Cables, Ext. Lighting Supplying , fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 HZ AC with latest microcontroller based, dig...

Supplying & fixing of shunt trip suitable for MCCB.CBCT .

Supplying , fixing of LED type panel board indicating lamp with required colour suitable for 230/440v AC 50Hz 12/24v DC.

Supplying of multi function Digital meter with three line back light LCD type display for V, C, F, KW, PF, KVA , KWH, KVAR suitable for 3 phase 4 wire LT network with IP 54 degree of protection and co...

Supplying , fixing and wiring 50/5 to 400/5 Amps 5 VA burden current Transformer .class 0.5 accuracy tape wound

Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal M...

Electrical Interlock to be provided for a and b MCCBs ) THREE POLE MCCB 160Amps 25 KA

Electrical Interlock to be provided for "a" and "b" MCCBs ) THREE POLE MCCB 100Amps 25 KA

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with

hinged front cover, equipped...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required . 25 x 6 mm

Supplying , fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 HZ AC with latest microcontroller based, digital readout of pecentage leakage curre...

Supplying & fixing of shunt trip suitable for MCCB.CBCT .

Supplying , fixing of LED type panel board indicating lamp with required colour suitable for 230/440v AC 50Hz 12/24v DC.

Supplying , fixing and wiring 0 to 600 Volts 96x96 mm AC Voltmeter on exising panel / woodboard .

Supplying , fixing and wiring rotary selector switch suitable for Voltmeter .

Supplying , fixing and wiring 3 Phase Digital Ammeter

Supplying , fixing and wiring rotary selector switch suitable for Ammeter

Supplying , fixing and wiring 50/5 to 400/5 Amps 5 VA burden current Transformer .class 0.5 accuracy tape wound

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.

Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal M...

Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal M...

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/OFF energy cross-3 with short circuit brreaking capacit...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulato...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . ...

Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with

hinged front cover, equipped...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required . 25 x 6 mm

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

strip thickness in average +5...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 6 sqmm to 16 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 sqmm to 75 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 95 sqmm to 150 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 185sqmm to 240 sqmm

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) a. in soil - (ordinary)

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) b. in soil ( hard )

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) a. 19/20mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) b. 25mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) c. 32 mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) d. 45mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) e. 50 mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) f. 63 mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) g. 75 mm dia

Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) h. 100 mm dia

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm long barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 sqmm long barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm long barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120 sqmm long barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 185 sqmm long barrel

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. a. 80 mm

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. c. 65 mm

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. a. 450 X 50 mm

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. b. 600 X 50 mm

Supplying, fixing and wiring of earth electrode for grounding of lifts, Transformers DG Sets etc, using 40mm dia 2.9 mm thick 2.5 meter long GI pipe with GI nnel with mesh & suitable size reducer fixe...

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. a) 25 X 3 mm GI strip

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. b) 25 X 6 mm GI Strip

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. c. 40 X 6 mm

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. d. 600 x 600 x 3 mm GI plate

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. Copper Strip a. 25 X 3 mm

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. Copper Strip b. 25 X 6 mm

Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required. Copper Strip c. 600 x 600 x 3 mm copper plate