Quatation/21/25-26/Medical store/2nd

Supply & Installation of PUF thermal insulated Panelsto maintain 2° to 8°C temperature, each Panel manufactured with closed cell rigid Poly Urethane Foam injected at high temperature that secures the bond with facing material to form a single piece construction. PUF insulation panels which are CFC free and has zero ODP- Ozone Depleting potential, having core density of 40kg/CuM, Panel finish designed to resist many chemicals including formaldehyde and most common cleaning agents. Walls: 60mm prefab PUF panels, inside surface 304 Grade Stainless Steel finish sheet of 0.5mm thickness and outside surface pre-painted steel of 0.5mm thickness having Corners: Corner Panels with rivet free joints for wall construction, Cam lock Arrangement: Tongue & Groove PUF Panels with cam locks for wall to wall joints, Ceiling: Suspended Ceiling made from 60mm prefab PUF panels, inside surface 304 Grade Stainless Steel finish sheet of 0.5mm thickness and outside surface pre-painted steel of 0.5mm thickness having vapour proof lighting arrangement, Floor: of 80mm thk having GI Outer sheet + Marine Ply + 60mm thk Puf panel + Aluminium Sheet + 3mm thk Aluminium Checkered Plate) Room 1: 2.9Mt(W) x 3.9Mt(L) x 2.2Mt = 52.5 SqMt

Supply & Installation of Insulated Air tight doors of 60mm thickness specially manufactured for Cold Room application comprising PUF slab covered with SS304 cladding and Aluminium Chequered Plate for protection. Door will have heavy chrome plated hinges, locking arrangement from outside & good quality 2 layer rubber gasket provided on door for proper sealing to avoid cold air leakage from the door. Clear door opening of 0.87Mt width with Posi seal Closure and Door Heater including following accessories: 1. Door Alarm 2. Lock Defeat mechanism 3. Heavy Duty Handles, Hinges & Locks

Supply, Installation Testing & Commissioning of 15000 Btu/hr nominal capacity floor mounrted/ ceiling suspended type Evaporating unit operating on 415V 3Ph power supply that can achieve and maintain Indoor Conditions at 2° to 8°C by using highspeed and high capacity multiple rotar-driven fans confirming to IP45 Standards to deliver 12750 CMH upto 20FT distance, having 4-Row DX type cooling coil with mutli-circuit fabricated from copper pipes with Alu. Fins at 4 FPI, complete coil housed in 304 grade Stainless Steel enclosure along with expansion valve, shut off valve for suction/liquid lines, micro controller thermostat and required copper fittings: 1 Running + 1 Standby = 2 Units working in tandem every 12 hours

SITC of Temparature Controller and programmable remote contol Panel

Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R 410 for AC unit.

Supplying, installing, testing & commissioning of ductable type high static indoor unit (IDU) having nominal cooling capacity of 2.8 TR to 3.0TR (1100 cfm) having EER as per BEE standards and specifications with evaporator fan woth motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion drain tray, expansion device, corded remote control necessary controls and electrical terminal to receive power supply etc and outdoor unit of equivalent capacity having environment friendly refrigerant running on 3 Ph Power supply with providing any additional refrigerent and oil charges as per requirment during installation connected with the system complete.