Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC | ₹8.4 L Quoted ₹8.6 L | L1 | Accepted-AOC LOWEST TENDERER. |
| 2 | L2₹9.2 LRejected-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | ₹9.2 L | L2 | Rejected-AOC NOT LOWEST TENDERER. |
| Sl No | Description | Qty | Unit | ESKIMO COOL WORLD L1 | Shri Sai Enterprises L2 |
|---|---|---|---|---|---|
| 1.00 | Repairs/ Routine maintenance of microprocessor based aircooled high precision AC package plants of STULZ make of capacity 7 TR (sensible cooling capacity) having various units round the clock including maintaining the plants twenty four hours for desired temperature of 21+/-3 degree celcius without interuption including repairs/ replacement of damaged/ unserviceable minor/major all types of parts i.e controlling valves, copper tubings, nitrile rubber insulation, and all electrical/ electronics components, control wirings, sensors,Thermistors, thermocol inner packs,indoor/ outdoor fan motor windings, vibration pads, Compressor, Control Board, dehumidifier, MNET Board, Noise Filter, Fan Board, Invertor Board, motor, condensor Coil, PCB, Drain Pump, Blower, Motor, expansion Valve, Addressing Board , remot controller, Cooling Coil, Cable tray, Refrigerant Piping as per existing size, painting of rusted out door stands and connected accessories, drainage lines, pre filters control/ communication wirings,earthings, leak test and all other accessories not mentioned in this schedule complete all as specified and directed.
(a) Microprocessor based aircooled High Precision AC Package of capacity 7 TR at NFS Site-I -3 Nos. | 11 | PER MONTH | 18,500 ₹2.0 L | 24,000 ₹2.6 L |
| 1.02 | (b ) Microprocessor based aircooled High Precision AC Package of capacity 7 TR at NFS Site-II -3 Nos. | 11 | PER MONTH | 18,500 ₹2.0 L | 24,000 ₹2.6 L |
| 1.03Note for Items No 1 to 1.02 :- (a) AC Mechanic skilled (duly trained in one No) have to attend MES AC/VRF plant complaint cell for all Microprocessor based aircooled High Precision AC Package plants units mentioned above for attending to the complaints on daily basis and shall report to the JE/Engr-in-charge concerned at the AC complaint cell for receiving the complaints. AC mechanic will be responsible to rectify the minor faults, routine cleaning & dry servicing of plants & filters. Wet servicing of whole plants should be carried by the contractor on monthly basis and any number of helper required for his assistance will be provided by contractor and for the same rates are deemed to be incl in above quoted rates. b) The contractor shall ensure visit of OEM manufacturer Engineer monthly and report/ serviceability of Microprocessor based aircooled High Precision AC Package plants Indoor /Out door units and same shall be submitted to this Office. The charges for all OEM procedures are deemed to be included in the quoted rates. The reports of OEM Engineer shall be produced before submitting RARs. (c) AC mechanic must be experienced in Microprocessor based aircooled High Precision AC Package plants and capable for carrying out any type of maintenance or attending breakdown in above mentioned plants. (d) Incase of any breakdown the additional man power if required will be arranged by the contractor without any price adjustment. Any breakdown shall be attened within 24 hrs & rectified in 48 hrs else a penalty of Rs. 2500/- per day will be imposed. (e) The cost of replacement of all Minor/Major parts which are not mentioned in schedule shall be deemed to be included in quoted rates Item No 1. | |||||
| 2.00 | Supply and charging of refrigerant fresh gas R 410a/407C complete all as specified and directed. . | 60 | PER KG | 850 ₹51,000 | 1,100 ₹66,000 |
| 3.00 | Supply and fix perforated cable tray of size 300mm x 50mm and 3.15mm thick painted powder coated pre galvanised hot dipped complete all as specified and taking out old u/s damaged cable tray. | 20 | RUNNING METRE | 450 ₹9,000 | 800 ₹16,000 |
| 4.00 | Supply installation, testing & commissioning of mirror finish inside /outside refrigerant piping 13 to 42mm dia including thermal insulation out of hard drawn copper pipes suitable for package type AC system including all fittings like bends elbows, tees with all internal joints type fittings pipe line must be tested for requisite pressure and must be supported at every 2.4mtrs in intervals. All refrigerant piping to be insulated with 19/13mm class "0" armaflex nitrile rubber complete refrigerant piping to be laid in GI tray and taking out old u/s damaged refrigerant pipe complete all as specified and as directed. | 20 | RUNNING METRE | 400 ₹8,000 | 500 ₹10,000 |
| 5.00 | All as per item No 4 above but 6.5mm to 13mm dia. | 20 | RUNNING METRE | 320 ₹6,400 | 700 ₹14,000 |
| 6.00 | Taking out unserviceable temp sensor and Supply and fix new temperature sensor with cold assembly 230 v AC suitbale for split type ac of 1.5/2 Ton capacity of make any make model complete all as specified and as directed. | 2 | EACH | 650 ₹1,300 | 250 ₹500 |
| 7.00 | Taking out unserviceable air filter and Supply and fix new Air filter suitable for split type ac of 1.5/2 Ton capacity as per sample complete all as specified and as directed. | 5 | EACH | 240 ₹1,200 | 500 ₹2,500 |
| 8.00 | Taking out unserviceable copper cappliary tube and Supply and fix new copper cappliary tube suitable for Split type AC's and water coolers of any make/model complete all as specified and as directed. | 2 | EACH SET | 525 ₹1,050 | 300 ₹600 |
Updated dates
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
4 Dec 2025, 6:00 pmClosed
LT COL RAVI KUMAR PATIYAL, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR MAINTENANCE OF SPARE PARTS, FIRE ALARM SYSTEM AND INCLUDING ANNUAL MAINTENANCE CONTRACT WITH OTHER CONNECTED WORKS FOR PACKAGE TYPE ACs OF AFNET SITE I AND II AT VSN NAGPUR
2025_MES_738137_1
8764/E8
Open Tender
Civil Works
330 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹20,000
28 Jan 2026
1 Nov 2025
6 Dec 2025
1 Nov 2025
4 Dec 2025
15 Nov 2025
Amount
Repairs/ Routine maintenance of microprocessor based aircooled high precision AC package plants of STULZ make of capacity 7 TR (sensible cooling capacity) having various units round the clock including maintaining the plants twenty four hours for desired temperature of 21+/-3 degree celcius without interuption including repairs/ replacement of damaged/ unserviceable minor/major all types of parts i.e controlling valves, copper tubings, nitrile rubber insulation, and all electrical/ electronics components, control wirings, sensors,Thermistors, thermocol inner packs,indoor/ outdoor fan motor windings, vibration pads, Compressor, Control Board, dehumidifier, MNET Board, Noise Filter, Fan Board, Invertor Board, motor, condensor Coil, PCB, Drain Pump, Blower, Motor, expansion Valve, Addressing Board , remot controller, Cooling Coil, Cable tray, Refrigerant Piping as per existing size, painting of rusted out door stands and connected accessories, drainage lines, pre filters control/ communication wirings,earthings, leak test and all other accessories not mentioned in this schedule complete all as specified and directed. (a) Microprocessor based aircooled High Precision AC Package of capacity 7 TR at NFS Site-I -3 Nos.
(b ) Microprocessor based aircooled High Precision AC Package of capacity 7 TR at NFS Site-II -3 Nos.
Supply and charging of refrigerant fresh gas R 410a/407C complete all as specified and directed. .
Supply and fix perforated cable tray of size 300mm x 50mm and 3.15mm thick painted powder coated pre galvanised hot dipped complete all as specified and taking out old u/s damaged cable tray.
Supply installation, testing & commissioning of mirror finish inside /outside refrigerant piping 13 to 42mm dia including thermal insulation out of hard drawn copper pipes suitable for package type AC system including all fittings like bends elbows, tees with all internal joints type fittings pipe line must be tested for requisite pressure and must be supported at every 2.4mtrs in intervals. All refrigerant piping to be insulated with 19/13mm class "0" armaflex nitrile rubber complete refrigerant piping to be laid in GI tray and taking out old u/s damaged refrigerant pipe complete all as specified and as directed.
All as per item No 4 above but 6.5mm to 13mm dia.
Taking out unserviceable temp sensor and Supply and fix new temperature sensor with cold assembly 230 v AC suitbale for split type ac of 1.5/2 Ton capacity of make any make model complete all as specified and as directed.
Taking out unserviceable air filter and Supply and fix new Air filter suitable for split type ac of 1.5/2 Ton capacity as per sample complete all as specified and as directed.
Taking out unserviceable copper cappliary tube and Supply and fix new copper cappliary tube suitable for Split type AC's and water coolers of any make/model complete all as specified and as directed.
Taking out defective capacitor and supply and fix running capacitir suitable for 1.5/2 ton 230 v split AC 36/40/45/50/55/60/75/80/120 MFD complete all as specified and as directed.
Taking down unserviceable fan motor blade assembly & supply and fix new fan motor blade assembly for split type AC 1.5/2 Ton capacity of any make/model complete all as specified and as directed.
Taking down unserviceable blower drum assembly and supply and fix new blower drum assembly suitable for 1.5/2 ton capacity of split type acs for any make/model of any make/model complete all as specified and as directed.
Taking down unserviceable condenser fan motor assembly and supply and fix new condenser fan motor assembly suitable for 1.5/2 Ton split type AC of any make/model complete all as specified and as directed.
Taking down unserviceable remote assembly kit and supply and fix new including PCB board suitbale for 1.5/2 TON cap split AC of any make/model complete all as specified and as directed.
Taking down unserviceable PVC drain pipe & supply and fix with new PVC drain pipe with clamps set of size 20-32 mm dia up to 2 mtrs complete all as specified and as directed.
Supply only cordless (IR Based) remote suitbale for 1.5/2 Ton cap split type AC of any make / model complete all as specified and as directed.
Taking down unserviceable power contactor & supply and fix new power contactor suitable for 1.5/2 ton split type AC of any make /model complete all as specified and as directed.
Taking down unserviceable brass suction valve & supply & fix new brass Discharge/suction valve of size (1/2")/ (1/4"), (3/4"), (3/8"), (5/8") suitable for 1.5/2 ton split type AC of any make /model complete all as specified and as directed.
Taking down unserviceable brass flare nut & Supply and fix new brass flare nut (1/2")/ (1/4"), (3/4"), (3/8"), (5/8") suitable for 1.5/2 ton split type AC of any make /model complete all as specified and as directed.
Supply and fix PVC rigid conduit pipe 20/25 mm dia including all accessories and necessary saddles with fixing screwa, gutties etc. complete all as specified and as directed.
Dismantling of 1.5/2 TR capacity of split type Acs and removing of existing indoor/outdoor units, including MS angular frame /MS channels, copper tube , foundation frames etc, complete and closing of holes of pipe line and drain water opening and making surface good with plastering and painting to match the existing colour of walls complete all as specified and as directed.
Fixing of 1.5/2TR capacity of split type Acs indoor& outdoor units including MS chanels, modification of copper tubes including installation foundation frames of out door unit complete and provision of opening of through holes for pipe line and drain water in brick/stone masonary wall and disturbed surface making good with plastering and painting to match existing colour of walls, Note: Item obtained from te above ser No 20 shall be reused
Dismantling of unserviceable condensor coil complete and providing of new condensor coil of same size and quality complete suitable for split type AC of capacity 1.5/ 2 Ton of of any make /model complete all as specified and as directed.
Dismantling of unserviceable knob of thermostat and providing of new knob of thermostat of same size and quality suitable for the existing split type AC of capacity 1.5/ 2 Ton of any make /model complete all as specified and as directed.
Taking out of defective fan motor and providing new fan motor suitable for existing make of AC split type capacity 1/10 HP complete all as specified and as directed.
Material and labour for taking out existing filter and capilary and replace by new filter and capillary of same size and quality suitable for split type air conditioner 1.5/ 2 TR complete all as specified and as directed.
Dismantling of existing unserviceable blower motor and providing of new blower motor double ended shaft type of same quality and charecteristics suitable for any make of 1.5/2 Ton capacity split AC of any make /model complete all as specified and as directed.
Taking down of unserviceable PCB (Printed circuit board) and providing new PCB for AC of 1.5 / 2.0 Ton capacity of split type invertor / non invetor AC complete all as specified and as directed.
Taking out of unserviceable swing motor and providing new swing motor of same quality and charecteristics suitable for any make of AC 1.5 / 2.0 Ton split complete all as specified and as directed.
Dismantling old and providing new copper tubes of size (1/2") / (1/4") / (3/4") / (5/8") /(3/8") inch for suction line including rubber tube insulations of same size for fixing AC complete all as specified and as directed.
Material and labour for checking of gas leakage and supply and charging of gas, including vacummising, cutting, brazing after filling again and checking of gas leakage after gas charging for the following instruments :- Note : Make of gas : R-134 a/R-22/R-32/R-410a. Contractor shall be ensure that gas charging to be measured as Job and if there is any leakage during the contract period, then the same will be fullfilled by the contractor without any extra cost. Note: No tools and plants, gas cylinder shall be issued by MES complete all as specified and directed. (a) Split AC (1.5/2 Ton) complete all as specified and as directed.
Supply only Refrigerant (R -134a/410A/R-32/R-22) suitable for split AC. Note: Empty cylinder will be issued by the department complete all as specified and as directed.
Supply & fixing pvc insulated 1100v grade of size 2.5 sqmm, 4 core pvc round sheathed insulated flexible FR copper cable complete all as specified and as directed.
Supply & fixing rubber insulation (inner thickness of NR is not less than 4mm) suitable for existing copper pipe from indoor unit to outdoor unit of split AC 1.5/2 ton capacity complete all as specified and as directed.
Taking out old unserviceable split AC stand of outdoor unit and supply & fixing new stand suitable for 1.5/2 ton including necessary fixing arrangement complete all as specified and as directed.
Material and labour for fire alarm panel 4 zone microprocessor based model FS-2Z complete all as specified and directed.
Material and labour for smoke detector conventional type model AS- 601-SD complete including taking down old one complete all as specified and as directed.
Material and labour for hooter 100 db output with MS housing model H-MS-2 complete all as specified and as directed.
Material and labour for MCP dual LED transperant flip cover for protection model BG-ABS-2 complete all as specified and as directed.
Material and labour for copper cable 2 core 1.5 Sqmm complete all as specified and as directed.
Material and labour for response indicator to indicate the location of fire complete all as specified and as directed.
Shri Sai Enterprises (BID ID -3483303)
Bidder Name
ESKIMO COOL WORLD
Shri Sai Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BOQ_826521.xls
BOQ • 0.42 MB
TENDERDOCS8764.pdf
Tender Documents • 0.49 MB
SCHofCREDIT8764.pdf
Tender Documents • 0.05 MB
Download all tender documents and submit your bid