CERTAIN REPAIRS TO OTM ACCN OF KULWANT COY, ROD COY AND RTW AT CMM UNDER AGE BR-I , CERTAIN E/M MAINT WORK OF CDA JABALPUR , PAO (OR) CORPS OF SIGNALS AND OUTSOURCING THE SERVICES FOR MANNING AND OPERATION OF DG SET INSTALLED AT CDA JABALPUR UNDER A

Amount

Taking down cement plaster on brick or stone wall etc. including raking out joint, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 mixed with WPC as per manufacturer’s instructions, but not less than 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only Integral water proofing compound all as specified and directed (ISI Mark).

M&L for rendering 15mm thick in CM (1:6), on fair faces of brick work or concrete surfaces, finished the surfaces even & smooth, without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3), on fair faces of ceiling surfaces, finished the surfaces even and smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying three coats of white wash all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm but not exc 4 Sqm each.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5.Sqm each.

Taking down shutters of any description exc 1 Sqm each but not exc 2 Sqm each.

M&L 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

M&L 35mm thick 2nd class HW (factory made) Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters ( factory made)of open rebated and prepared to recive glass, guaze etc (without sash bar)edges of framing plain chamfered or rouunded fitted with cut and beads for sccuring glass, gauge etc size of shutters as specified in SSR Part-I section & clause 8.24(a)..complete all as specified and directed.

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed.

S&F factory made solid PVC moulded door shutter designer shutter 35 mm thick comprising of 30 mm thick solid particle board core in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face all as specified and directed by Engr-in-Charge.

S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.

S&F (factory made) steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S&F (factory made) steel ventilators with top hung shutter including hinges, steel pegstay complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified.

All as per Srl item No 21 here-in-before but frosted glass on one side.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 100mm long butt hinges, 'medium weight', Mild steel min 3 mm thick complete of design all as directed by Engr-in-Charge.

S&F 75mm long butt hinges, 'medium weight', mild steel min 3 mm thick complete of design all as directed by Engr-in-Charge.

S& F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified.

S&F 100mm long aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.

S&F 10 mm dia MS window guard bars conforming to Fe-410-0 or Fe-310-0 and fixed independently in steel/wooden frames complete all as specified.

M&L preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L preparation of new surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth over steel surfaces surfaces complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubish off the premised out side M.D. land all as specified.

M&L Non Skid ceramic/coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm screed bed in CM (1:6) complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm screed bed in CM (1:6) complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 thick rendering in CM (1:4) finished rough to receive tiles etc with shalicrete R/E (STP) water proofing compound as per manufacturer's instructions complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern), size 580x440mm, white, with integral foot rest (excluding flushing and flush pipe) including connection to trap and flush pipe and incl trap set in lime concrete etc including making good to floor complete all as specified and directed by Engr-in-Charge. Make:- Parryware/Hindware.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level ,white, with inlet, ball valve,float and handle including brackets complete all as specified. Make: Parryware/Hindware/Commander

M&L in repairs 75 mm dia of outlet for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified.

M&L in repairs for PVC (SWR) multi floor trap 75 mm dia of outlet including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified all as specified.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing complete all as specified.

S&F tubes "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore all as specified.

S&F tubes "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore all as specified.

Refixing old steel tubing 15 mm bore and connections in new or old position (Wall, ceiling, floor etc.)

Refixing old steel tubing 20 mm bore and connections in new or old position (Wall, ceiling, floor etc.)

S&F in repairs 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for bib ferrule complete all as specified and directed.

S&F in repairs 15mm bore stop valves , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with or with out swivel joints any size and including fixing to steel or union all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT(Minimum weight 25 grams) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified.

S&F in repair vitreous china wash basin, white flat back, size 580 x 450 mm including brackets, pillar tap, cast copper alloy, 15 mm bore capstain heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts 32mm bore, PVC waste pipe, 32 mm bore chromium plated cast copper alloy waste coupling complete all as specified.

S&F in repairs, 25 mm dia Harrison rails stainless steel CP including fixed with brackets, stops, rollers etc complete all as specified and directed.

Demolition of concrete ground floors and pavings nexc. 15cm thickness (below or above ground level) unreinforced and removing of rubbish to a distance nexc 100m at low lying area complete all as specified.

M&L 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone agg as in floors finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in path/plinth protection finished even and fair with out using extra cement incl expansion joint at every 3.0m interval and every corner complete all as specified and directed.

M&L for 100 mm thick PCC1:2:4 type B 2, using 40 mm graded stone aggregate as in hard standing finished even and smooth without using extra cement complete all as specified.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in sub base of floors. Finished even and fair without using extra cement complete all as specified.

M & L 100mm thick cement concrete 1:4:8 type D2 using 40 mm grded stone aggrgate as in sub base finished the surface rough to receive floor finishes complete all as specified.

Demolition of brick work built in cement mortar including all quoins, arches etc complete all as specified and directed.

M&L brick work with old size sub class “B” bricks straight or curved on plan exc 6m. mean radius built in CM (1:6) complete all as specified.

All as per Srl item No 63 here-in-before but except bricks.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. Make : Kisan/Supreme/ Finolex

S&F in repairs 110mm bore PVC (SWR) pipes bends any radious complete all as specified and directed. Make : Kisan/Supreme/Finolex

Dismantling water tanks of capacity exc 250 Ltrs and n.exc 500 Ltrs complete all as specified.

S&F 500 litrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. Note : Tanks shall be ISI marked and having two layers. Make : Sintex/Polycon/JS Polyplast

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make-Prayag/ Marc/Plumber

S&F in repairs 50mm boreHigh density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m in waste pipe for WHB and sinks,complete all as specified and as directed.

S&F in repairs 40mm waste coupling of PTMT (half or full threaded) . (Mini wt 32mm- 45 gms) complete all as specified.

S&F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms).

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long brackets. Make Prayag/Marc/ Parryware

S&F in repairs viterous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts,flushing cistern and flush pipe) including connection to drain and to flushing pipe syphonage pipe etc. incl plastic water closet seat black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinges device Make: Parryware/Hindware complete all as specified.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long brass CP complete all as specified. (Make Prayag/Marc/Plumber

M&L machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid over and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

All as per Srl item No 77 here-in-before but as in skirting/dado but over and including 10 mm thick rendering in CM (1:4)

S&F in repairs 300 mm long brass ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&Fin repairs Hasp and staple, safety type, auminium anodised with mild steel hinge pin including bolt to hinge plate of 100mm size and fixed with screws complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nanital or similar pattern roof covering.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour (mangalore pattern and joints/lapping filled with silicon compound) any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary cutting groves chasing to wall and making good with PCC 1:2:4 (20mm graded stone aggregate) & plaster in CM (1:3) complete all as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.60mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, in ridges, hips, valley gutters, drip and straight flashings etc.fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description complete all as specified. Note :- Mode of measurement shall be carried out after measurement by actual weight and same Qty c/o in Sch of Credit also.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including necessary welding complete all as specified.

S&F mild steel flat iron as in wind tie for roof including cutting & making holes for securing bolts, confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Fixing only wind ties of flat iron for roof including bitumen washers and all necessary drilling, bolting or riveting, etc complete all as specified and directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm compressing of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. Make : Armstrong/Ramco.

M&L machine pressed coloured glossy finished rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using coloured pigment laid on and including sand cushioning of 50mm thick complete all as specified.

S&F factory made solid panel Prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both face prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. Make : Rajshri/Sintex.

S&F in repairs solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on inside walls of cupbords etc as per specifications and drawing.

S&F in repairs 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing Note : MS work shall be measured and paid separately.

S&F in repairs 12mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing Note : MS work shall be measured and paid separately.

S&F MS TMT bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire (annealed) not less than 0.9 mm dia Grade Fe 500/550 complete all as specified and directed.

M&L Precast RCC 1 : 2 : 4 Type B1 ( 20 MM graded stone aggregate) as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to match complete all as specified.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in partition, jambs, pillars, window- cills, cooking platforms and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance nexc 100mtr at low laying area complete all as specified.

Taking down carefully copper/aluminium point wiring ( light,fan,power point or bell point etc) complete including fixture and fitting such as switches,ceiling rose holders & regulators light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unservicable distribution boards by disconnection of electric connection carefully SPN DBs/TPN DBs/main Switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface etc complete all as specified and directed.

Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including Medium grade PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, and for one light /fan point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2mm thick (flush metal box) for mounting of fittings like switch, socket , fan regulator etc complete with 3mm thick laminated switch board cover all as specified and as directed.

All as per Srl item No 102 here-in-before but for One ceiling fan/exhust fan point controlled by one switch complete all as specified by the Engineer-in-Charge.

All as per Srl item No 102 here-in-before but for One 3 Pin, 5/6 amps socket outlet point ,on the same board with with 1.5 Sqmm cable size etc complete all as specified and as directed. .

All as per Srl item No 102 here-in-before but for One 3 Pin, 5/6 amps socket outlet point , independent board with 1.5 Sqmm cable size etc complete all as specified and as directed. .

All as per Srl item No 105 here-in-before but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

All as per Srl item No 105 here-in-before but 4.00 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 4.00 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

M & L for sub main wiring with approved colour as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 10 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Four runs (with Red, Yellow, Blue colour for Phase + Black colour for Nutral) of 10 Sqmm cable, one run (with Green colour for Earth) of 10 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M & L for Sub Main wiring (concealed type) in & including with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run (with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M & L for Sub Main wiring (concealed type) in & including with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.00 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 4.00 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 4.00 Sqmm cable, one run (with Green colour for Earth) of 4.00 Sqmm cable and one run of PVC conduit shall be measured as one unit.

S & F for sheet metal enclosure MCB DB V TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system Suitable for FP MCCB 'G' Frame including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one double pole MCB 20A, 10 KA 240 volt complete all as specified and as directed.

S & F MCCB triple Pole and neutral rated capacity 125 Amps, 415 Volts, breaking capcity 16 KA "C" curve complete all as specified and directed.

S & F MCB triple Pole and neutral rated capacity 100 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S & F MCB triple Pole rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S & F MCB single Pole of capacity 40 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S & F MCB single Pole rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

Labour only taking down & refixing the ceiling fan/exhaust fan with replacement of unsv 3 core PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

S & F new 1 X 10 W LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x10W LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed. Make - CG/Bajaj/Philips

S & F new 2 X 34 W LED light fittings four fit size, suspended- surface inner roof ceiling mounted hanging with regid conduit as per site requirement of class room and pure line extruded aluminium suspended diffused office llighting solutions with up-down light distribution available in standalone and continuous mounting versions in 4 fit etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed. Make - CG, Bajaj/Philips cat part No-SP680P X 2 LED34S 6500 PSU WH L120S1

S & F new 1 X 20W LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x 20 Watt LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed. Make - CG/Bajaj/Philips

S & F new extension cord 4 Nos 5/6 Amp S/S combination of wire length 2 mtr approx compete all as specified and directed.

S& F XLPE insulated armoured and pvc sheated heavy duty electric cable with aluminium conductor 1100 volt grade laid in tranches passing through pipes /ducts/walls including testing complete of following cross sectional area and size10 Sqmm 2 core compete all as specified and directed. Note- rate is inclusive of cable gland & cable lugs.

Comprehensive Maintenance / preventive Servicing of DG set of capacity 320 KVA Make : Kirloskar Cummins Ltd, water cooled type by the rep of authorised service centre of manufacturer the checks at least once in a month i.e (11 Months), checking up of engine and alternator for trouble free functioning and attending break downs/complaints as and when required. The type of work / maintenance services to be carried out during comprehensive maintenance are as under :- (a) Checking of Engine Oil level. (b) Checking of oil bath cleaner oil level. (c) Drain sediments from fuel tank. (d) Checking of pre- cleaner dust pan. (e) Checking of air cleaner restriction. (f) Checking of coolant level. (g) Record Oil pressure. (h) Checking/tightening of all nuts/bolts of engine and alternator. (i) Checking of AVM pads. (k) Checking of diaphragm coupling (l) Checking of tappet clearance m) Clean fuel tank breather (m) Clean crank case breather (n) Checking of Air piping. (o) Cleaning of oil bath Air cleaner Tray screen. (p) Check / adjust Belts. (q) Checking battery voltage, water level and apply jelly on terminals.(r) Checking fan hub/air blower hub and water pump. (s) Cleaning turbo charger. (t) Tighten manifold Nuts of cops screws. (u) Cleaning of electrical connections with CTC solution. (v) Checking of safety controls (w) Cleaning of cooling system/radiator assembly (x) Cleaning of Engine and radiator assy (y) Checking of Engine Oil Level. The capacity and location of the DG sets that are included in the comprehensive maint are as under :- Note : - (i)The comprehensive maintenance includes carrying out preventive maintenance excluding replacing all the unserviceable / worn out spares to keep the DG set for trouble free functioning. Note:- Spare parts required for repair/ replacement will be measured and paid separately under respective item of schedule 'A'.

Supply & fixing the following spare parts (for Item Sr No 126) sutable for 320 KVA DG set Make- Kirloskar Commins (RCL) 6 cylinder water cooled.

Liner with O ring

Piston Assembly

Piston ring set

Packing set

Valve pair

Valve guide

Valve seat

O ring set

Air filter inner and outer

Connecting Rod

M&L for cleaning internally Radiators of DG set of capacity 320 KVA using cleaning agent all as specified and as directed at site.

Repair/ servicing of self starter Starter by replacement of carbon bushes, US parts & overhauling complete of DG set 140 to 320 KVA capacity complete all as specified and directed by Engr-in-Charge. Make : Kirloskar/ Cummins (RCL).

Dismantling the self starter of 320 KVA DG set after disconnecting all electrical and mechanical connection, transporting to work shop for rewinding with supper enameled winding wire of apropriate/ existing guage, varnishing, drying/backing , bench testing in work shop. transporting given by contractor site, testing and checking the performance for trouble free and smooth functioning complete all as specified and directed by Engr-in-Charge.

Supply & fixing the following parts suitable for DG set of capacity 320 KVA complete all as specified and directed by Engr-in-Charge. Make : Kirloskar Cummins Ltd, water cooled type.

Diesel filter element

Oil filter element

By pass filter element

Fan belt set

Automatic voltage regulator

Changing of Engine oil

S&F 12 Volts 180 Ah battery for DG sets Make Exide batteries model No- XP-1800 incl leads complete all as specified and directed by Engr-in-Charge.

Dismantling the Alternator of 320 KVA DG set after disconnecting all electrical & mechanical connections, transportation to the work shop for rewinding the rotor & field windings with supper enameled winding wire of appropriate/ existing gauge ,varnishing, drying/ backing, bench testing in work shop, transporting back to by contractor site, re assembling, testing, & checking the performance and out put of alternator for trouble free & smooth functioning complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable Indicator Lamp - R - Y - B (Set of three) of any type or size and supply and fixing Indicator Lamp - R - Y - B (Set of three) complete all as specified and directed. Make : AE

M & L for maintenance of AMF panel complete all as specified and directed by Engr-in-Charge.

Labour charges incl replacement of handle for ON LOAD change over switch 415V, 50Hz, Confirming to IS 13947-3, 630 Amps, 4 Pole complete all as specified and directed by Engr-in-Charge. Make - Havells/L&T/standard/ legrand/ Siemens

S&F ON LOAD change over switch 415V, 50Hz, Confirming to IS 13947-3, 630 Amps, 4 Pole. Make - Havells Cat Part No - IHCNFE0630 or/L&T/standard/ legrand/ Siemens

Taking down unserviceable MCCB 630 Amps, 4 Pole, 50 KA of any type or size and supply and fixing Thermal magnetic and microprocessor release MCCB 630 Amps, 4 Pole, 50 KA with front operated locking device complete all as specified and directed. Make : Legrand Cat Part No -422075 , Havells, L&T

Taking down unserviceable Thermal magnetic MCCB 250 Amps, 4 Pole, 415V, 36 KA of any type or size and supply and fixing Thermal magnetic MCCB 250 Amps, 4 Pole, 415V, 36 KA complete all as specified and directed. Make : Legrand Cat Part No - 420249 , Havells, L&T

Taking down unserviceable Thermal magnetic MCCB 200 Amps, 4 Pole, 415V, 36 KA of any type or size and supply and fixing Thermal magnetic MCCB 200 Amps, 4 Pole, 415V, 36 KA complete all as specified and directed. Make : LegrandCat Part No - 420248 , Havells, L&T

Taking down unserviceable Thermal magnetic MCCB 63 Amps, 4 Pole, 415V,25 KA of any type or size and supply and fixing Thermal magnetic MCCB 63 Amps, 4 Pole, 415V, 25 KA complete all as specified and directed. Make : Legrand Cat Part No - 420053 , Havells, L&T

Manning, operation and routing/Daily maintenance of DG Set 320 KVA installed (CDA Main building) with deputing of one skilled FGM oprator for ONE shift of 08 hours each shift for 8 hours daily excluding Sunday & holidays for operation of DG Sets, LT Pannels for proper running :- 1. DG set 320 KVA - 01 Nos 2. Control Panel boards of DG sets and operating Pannels :-

Notes : 1. If quoted rates are less than minimum fair wages inclusive of GST EPF, ESIC as applicable the bid shall be treated as non-bonafide and will be rejected, No objection/claim in this regard will be accepted.

2 To maintain log sheet and log books for all plants and monthly duty roaster for duty staff.

3. POL shall be arranged by the Engr-in-Charge as per requirement and issued to contractor on schedule 'B' free of cost for bonafide Govt use only & a pucca bound register shall be maintained showing day to day input/output only signed by JE/Engr-in-Charge/Contractor.

4. The unit per day means 08 hours. The contractor shall deployed one FGM per shift of 08 hours at installation.

5. It is the responsible of AGE/JE to ensure that attendance register is maintained at all the installation duly signed kept on record and payment of trade man for the No of days present will only be made, Engr-in-Charge will be responsible for payment of tradeeman in his presence. Contractor shall provide proper dress to tradesmen as approved by Engr-in-Charge and during duty hours all tradesment shall be in proper uniform otherwise necessary recovery@ double the quoted rate for per shift shall be made from his dues.

6. In case the contractor does not operate the DG set for a day or part thereof due to any reason whatsoever double of the quoted rate to easch shift will be recovered.

7. The quoted rate is deemed to include for all surrounding premises cleaning such as in side the DG Set, out side, toilet including cutting of grass shrubsetc and always keep ready position whenever any visiting officer visits the site the DG set room should be cleaned and neat in all respect. In case any bad/adverse remark given by any visiting officer at ny time the necessary recovery @ double the rate quoted per remark per day will be charged from the contractor as certified by Engr-in-Charge and no claim whatsoever is admissible on the account, GE'S decision is final and binding on this account.

8. Trades Man should be wear always operators uniform and take prventive/safety measures and will use protective clothing as per code of IE rules. Department will bot responsible for any type of incident.

9. Contractor shall be made security pass for all operators and maintain proper register duly signed by all concerned.

10. T&P like spanners, Screw drivers, pipe wrench, torch light, other items required for repair etc will be provided by the contractor.

11. Leave of deployed person in inescapable cases shall be allowed on prior intimation but Contractor on demand of Engr-in-Charge, shall arrange alternate arrangment. Payment shall bot be allowed for leave period.

12. In no case wages of deployed persons shall be less than the Miniumam wages fixed by Govt Cpmpetent Authority. It is mandatory requirement for contractor that payment of deployed person shall be made through Cheque/RTGS/Acceptable Electronic Mode only. Proof of payment shall be submitted by contractor to Engineer - in - Chargemonthaly basis or during claiming on account of Advance(RAR)/FB.

13. The Employees Provident Funds & Miscellaneous Provisions (EPF & MP) Act, 1952 shall be strictly adhered to by the Contractor. Social Security to workers i.e EPF, ESIC personal Insurance (if applicable) on part of Employer shall be paid by contractor and accordingly,Contractor/Bidder shall include all thes factors in hs quoted rate.

14. Statuatory levies/GST if applicable on part of contracts shall be paid by contractor and acccordingly, Contractor/Bidder shall include all these factors in his quoted rate.

15. Deployed person shall report daly to JE/Engr-in-Charge or nominated officers by Accepting Officer for their attendence & obtain instructions. An attendence register shall be maintained by Contractor on site shall be certified by MES rep every day.

Schedule of credit amount of Rs. 1,71,002.50 to be deducted during AOC.

a k builders

M/S BHARTI ENTERPRISES