CA NO. CWE SGNR - 40 OF 2020-21 SPECIAL REPAIRS TO OTM ACCOMMODATION BUILDING NO. P-111/3 AT MILITARY STATION SRI GANGANAGAR

Amount

Dismatiling brick tiles or terracing tiles, single layer on roofs and mud phuska complete all as specified and directed by Engineer - in - Charge.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for roof treatment to RCC roof as follows:- (a) Cutting & uprooting grass on roof top,removing rubbish off the premises, cleaning the roof surfaces throughly using wire brushes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc complete. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP based membrane, (mineral finish) minimum weighing 3 Kg/Sqm reinforced with non woven polyster fabric ( weight not less than 150 gms/Sqm) by Torch application. the overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer in charge. Makes:STP, Dr Fixit/Pidlite, Texsa India Ltd Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement /as per site requirement and cured well before laying membrane by torching. (ii) All angles and abutments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved by GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having facilities for testing of membrane. (v) The guarantee of treatment shall be of minimum 10 years reckoned from date of completion of whole work.

Supply and fixing for heat resistance tiles of size 300x300x10mm thick on roof slab of any colour approved and laid over 15mm thick sceed bed or bedding layer in cement mortar 1:4.Techinical specification of roof tiles shall be as per IS 4457:2007 complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

Material and Labour for non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even and fairand pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

Demolition unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for machine cut Kota stone slab flooring 20-25 mm thick (minimum size 55cms x 55 cms) over 15 mm thick screed base in cement 1:6, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and polishing complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No.09 here in before but on vertical surfaces such as riser of steps 18-20mm thick over 10mm rendering in Cement mortar 1:4 and jointed with grey cement slurry with pigment to match the shade of slab, finished , complete all as specified and directed by Engineer - in - Charge.

Demolation of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches,pillars,etc, complete all as specified and directed by Engineer - in - Charge.

Material and Labour for brick work with sub class 'B' Bricks, well burnt straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

All as per Srl item NO. 12 here-in-before but for except bricks complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:4 other than fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces on patches as on ceilings finished even and smooth complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old painted / plaster surfaces and applying two coats of white wash on ceiling complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying two coats of cement base paint over a coat of white wash on new plastered surfaces complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation and complete removal of existing treated /painted old plaster surfaces and applying two coats of cement base paint complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation and complete removal of existing treated /painted old plaster surfaces and applying two coats of oil bound distemper complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of wall new plaster surfaces with 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old painted wood and wood base surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of old steel surfaces over 10 cm width or girth, not otherwise described and applying one coat of applying synthetic enamel paint complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames(without taking off shutters from the frame) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge. .

Taking down chowkhats or frames(without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames(without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and refixing in the same opening . complete all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description size exc 1.00 Sqm and n exc 2 Sqm complete all as specified and directed by Engineer in charge.

Supply and fix in repairs flat iron 25 x 6mm Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer in Charge

Cutting holes in brick (n.exc half brick) in brick walls built in cement mortar inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer in Charge

Supply and fix in repairs framed brackets of angles or tee with web and flange cut to shape, drilled and counter shunk for screw, including bending and welding angles as necessary gusset plates riveting rails, braces, running rails and guides and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165) complete all as specified and directed by Engineer-in-charge.

Supply and fixing for pressed steel door frame of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed by Engineer - in - Charge.

Takin down of steel ventilator of any description not otherwise complete all as specified and directed by Engineer in charge

Supply and fix for steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.

Supply and fix for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars 10mm dia round bar; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

S&F for mild steel handle (left / right) for fixing in steel windows with complete accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 35 mm thick Factory made IInd class hard wood plain framed panelled shutters (any number of Panels ) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS :1003 (Part -i) Klin Seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.

Supply and fixing for 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); scomplete all as specified and directed by Engr-in-charge.

Supply and fixing for Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for fiberways brand 30mm thick fiber glass reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.

Supply & fix 100 mm long butt hinges cold rolled medium weight, fixed with steel screws complete as specified & directed by Engineer-in-charge .

Supply and fix for aluminium handles cast type anodised, 150 mm long complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 125 mm size complete all as specified and directed by Engineer in charge.

Supply & fixing 300 mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified & directed by Engineer-in- charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified and directed by Engineer in charge.

Material and Labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

Material and Labour for preparation of new steel surface over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 4 mm thick figured glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer - in - Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer - in - Charge.

Supply and fix curtain rails, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed by Engr-in-charge

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 15mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 25mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 61 here-in-before but for re-fixing 15mm bore GI tubing with new fittings complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 20 mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 63 here-in-before but for re-fixing only 20mm bore GI tubing with new fittings complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 25 mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 65 here-in-before but for re-fixing only 25 mm bore GI tubing with new fittings complete all as specified and directed by Engineer - in - Charge.

Dismantling water tank capacity exceeding 500 Ltr and not exceeding 1000 ltr complete all as specified and directed by Engineer - in - Charge.

Dismantling water tank capacity exceeding 250 Ltr and not exceeding 500 ltr complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 500 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge.

Ssupply and fix in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excluding flushing cistern) including all joints and connection to trap, CI 'P' trap/S trap etc and making good to the floor complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water closet seat, white colour pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap complete all as specified and directed by Engr-in-charge.

Supply and fix in in repairs vitreous China urinals,half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs vitreous china wash hand basin counter shank with green/black granite slab to be cut and polished at site as per requirement and approved by Engineer-in-charge, including brackets, 32mm bore brass chromium plated waste coupling & 32mm bore low density polythelene (LDPE) flush pipe of pressure 6Kgf/Sqcm (1.00M long,) including 15mm bore 450/600mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs soap dish vitreous china 160x160x90 mm fixed with screws complete all as specified and directed by Engineer in charge.

Supply and fix in repairs Brass chromium plated shower rose 125mm size of any colour with or without swivel joints any size including shower arm complete all as specified and directed by Engineer in charge.

Supply and fix in repair 32mm dia PVC waste pipe for WHB of 75cm long complete all as specified and directed by Engineer in charge.

Supply and fix in repair towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) complete all as specified and directed by Engineer in charge.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Cement concrete 1:3:6 type C–1(20 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Stop valves, 15 mm bore cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Stop valves, 20 mm bore cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Stop valves, 25 mm bore cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Grating doom 100mm dia PTMT(minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 75 mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or floors complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or floors complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 75 mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 75 mm bore dia CI bends (any radius) diminishing pieces or tapers complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs100 mm C I bends (any radius) with duck's foot or heel rest complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 100mm C I branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 75mm C I branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 75mm CI branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 100mm C I branch pieces, doube (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 75mm thick cement concrete type C-2, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engineer - in - Charge

Material and labour for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer - in - Charge.

Demolition of Cement concrete(reinforeced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer - in - Charge

Material and Labour for Reinforced Cement Concrete 1:2:4, Type B–1 using 20 mm graded stone aggregate in RCC Chajja, parapet wall, slab etc complete all as specified and directed by Engineer - in - Charge.

Form work to chajjas, slab, beam and wall the rough finish and smooth with rough finished surface of concrete complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 106 here-in-before but for 10 mm dia and over upto and including 10 mm dia in stirrups, space and binders complete all as specified and directed by Engineer - in - Charge.

Demolition of cement concrete (unreinforced) any description and in any position for sunken portion (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for water proofing treatment to RCC sunken slab as specified below asd as directed by engr-in-charge:- (a) 15mm plaster in CM 1:3 with WPC on raised vertical surface. (B) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer Make :- Dr. Fixit/Fosroc/BASF/STP NOTE : (i) The Treatment shall be carried out as per the manufacturers industreis and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.

Material and Labour for cement concrete 1:5:10 Type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Supply and fixing second class clean swant hard wood for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and directed by Engineer - in - Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work.complete all as specified and directed by Engineer - in - Charge.

Supply and fix Continuous( piano) hinges , mild steel , bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Granite (of any type) work 20 mm thick (table rubbed and polished) in hand wash platforms over 15mm of screed bed in cement mortar 1:6.complete. including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Providing precast cement concrete 1:2:4 Type B-0(12.5mm gragded aggregate) , 40mm thick jalies (measured solid), including all mouldings and frame (Pre cast frame shall be measured separately and paid complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in Cement mortar 1:3 etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No. 118 here-in-before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 118 here-in-before but for one thee pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 118 here-in-before but for one swtich socket combination 6 Pin, 15/16 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 118 here-in-before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

Supply and fix switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in - Charge. Anchor/kinjal

Supply and fix switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Industrial socket metal clad plug with a two pin and earth plug and socket with MCB single pole 20 Amp complete all as specified and directed by Engineer - in - Charge.

Supply and fix for ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs light fitting with LED batten with aluminum housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz, 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/2 mm upto ceiling rose/connector complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No : LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part No : BCLSBAL 20W CW, Crompton cat part No : CCS-100-20-65-HL2-DP-NWH

Supply and fix in repairs security light fitting LED type 25 watt with all necessary accessories, clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 Hz AC & Supply and fixing to wall/on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore" light grade" brackets 2 mtr length bent to shape obtained required shape including clamps, nuts/bolts/washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No : ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part No BRLEP25W LED WH, Crompton cat part No LSTS-25-CDL-M

Supply and fix for angle holder insulated body with back plate for conduit fittings including LED bulb 9 W complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs water tight bulk head fitting, comprision of connector galvanized cast iron back plate, water proof enamelled gallery glass well, and including 10 watt LED lamp complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No : HEXAFT10WLED857SSYMBOPC, Bajaj cat part No BIBWP 10W LED, crompton cat part No LBHP-10-CDL

Supply and fix in repairs decorative wall light: fixture made up of poly carbonate suitable for 10 watt LED lamp. complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs compact and decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1x10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No LUMILINEPLUSBS10WLED865SPCSS, Bajaj cat part No BCLSB 10WH, Crompton cat part No LDL-10-CDL

Supply and fix in repairs stepped type electronic fan regulator flush type for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

Supply and fix in repairs sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. Note : PVC cable and PVC conduit shall be ISI marked

Supply and fix in repairs sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs MCB 'B' series type suitable for 240 Volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs sheet metal enclosure for double door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 12 Way 415 Volt ISI marked 250 Amps busbar stove enameled dust and vermin proof, IP : 43 protection suitable for incorporation FP MCCB (V-Tech) N1 Frame upto 125A, Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCCB TP&N 100 Amps with breaking capacity 16KA, Fixed TM and 415 Volts AC Supply ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pt not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to GI earth lead 4 mm dia GI earth wire, by means of bolts, nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs/Sqmm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out 40mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 mtr all as per electric plate No. 3 of SSR Part-I and connecting to earth test point including taking out unserviceable earthing with all accessories all as specified or indicated including testing on completion all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 52,009.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 31 & 32(R) (Schedule of Credit) of Tender document

M/S BUDHRAM BISHNOI

PAREEK AND COMPANY

Aggarwal brothers and company

M/s Chopdar Builders

KHANNA CONSTRUCTIONS