Setting up of Sub Divisiona...

Amount

Works Details

[23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]

Supply and erection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis 50 Pair

SITC of 12 U Rack with 2 side FAN with 3 socket PDU with 15 AMP DP for power surge safty. With pole mount accessories. Rack should be certified. Make: Valrack,Netrack,Comrack

SITC of 1 KVA online UPS with one hour backup complete in all respect.MAKE APC/ Miicrotek/DELTA/Emerson

Supply,Erection testing and Commissioning of UTP cat 6 information outlet( RED - for Data - User End) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link

Supply,Erection testing and Commissioning of UTP Face plate(Single/dual) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the workMake:- RandM,/Molex/D-link

Supply,Erection testing and Commissioning of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link 3 FT lenth

Supply,Erection testing and Commissioning of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link 7 FT lenth

Supply,Erection testing and Commissioning of Edge Switch 24 Port 10/100/1000 plus 2 10 G SFP Layer 2 manageble Base T Manageble auto sense, Ethernet switch complete in all respect up to the entire satisfaction of Engineer-in charge of work . Make:CISCO/Juniper/Alcatel/D- Link

Supply, Erection, testing and commissioning of Push Button Telephone Desktop model CLI, flash , redial ,mic with speaker complete in all respect.Make :-Beetel

SITC of 9 U Rack with 2 side FAN with 3 socket PDU with 15 AMP DP for power surge safty. With pole mount accessories. Rack should be certified. Make: Valrack,Netrack,Comrack

SITC of Digital Phonee with large Backlit Display of 240x60 Pixels Graphic LCD, 4 Context Sensitive Keys,Built-in 16 DSS Keys,High Quality Full Duplex Speaker Phone Features Call Forward,Waiting,Transfer,Hold,Conference,Redial, Ringer Lamp.Must have storage for minimum 20 calls per call log in the console itself.Make : Avaya/Unify/Matrix

SITC of 24-port 19` 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19` 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make Molex/D-LINK/RandM

SITC of Digital Hybrid IP-PBX System configured for 04 Analog Trunk Connectivity, 4 Digital Extensions, 16 Analog Extensions. It should be possible to reach the capacity of system to 48 ports.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. Make : Avaya/Unify/Matrix

Prime Computers (BID ID -1245779)

AVNET Solutions (BID ID -1245733)