Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.9 LAccepted-Finance | ₹22.9 L | L-1 | Accepted-Finance Found L-1 |
| 2 | L-2₹24.0 LRejected-Finance | ₹24.0 L | L-2 | Rejected-Finance Not found L-1 |
| 3 | L-3₹24.7 LRejected-Finance | ₹24.7 L | L-3 | Rejected-Finance Not found L-1 |
| 4 | L-4₹26.0 LRejected-Finance | ₹26.0 L | L-4 | Rejected-Finance Not found L-1 |
| 5 | L-5₹27.5 LRejected-Finance | ₹27.5 L | L-5 | Rejected-Finance Not found L-1 |
| Sl No | Description | Qty | Unit | popular pipes L3 | H.N.SINGH AND COMPANY L2 | ABTAR SINGH AND COMPANY L4 | SWAMI RAMJI BORE WELLS L1 | SUKHDEV ENGINEERING WORKS L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Transportation of Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields errection and levelling at site, through all kinds of roads, approaches fields etc. in all leads and lifts completed in all respects as per the directions of Engineer - in-Charge. | 1 | Job | 30,000 ₹30,000 | 30,000 ₹30,000 | 35,000 ₹35,000 | 30,000 ₹30,000 | 35,000 ₹35,000 |
| 2.00Drilling of bore as per specifaction laid down in IS2800-1991 (part-I) with upto-date amnedments,if any,with Reverese Rotary Rig starting with 450-400 mm dia M.S pipe conforming to IS 4270-2001 with up-to-date amendements,if any, in all kind of soils, boulders, rocks, collapsible strata,sturated soils,artesian conditions including the cost of all consumable,stores,water,fuel,lubricants and other accessories etc. complete in all respectsd as per the directions of the Engineer -in -Charge. | ||||||||
| 2.01 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 0-30 mtrs below ground level within all leads and lifts. | 30 | Mtr | 6,500 ₹1.9 L | 5,500 ₹1.6 L | 6,000 ₹1.8 L | 5,800 ₹1.7 L | 5,800 ₹1.7 L |
| 2.02 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 30-60 mtrs below ground level within all leads and lifts. | 30 | Mtr | 7,000 ₹2.1 L | 6,000 ₹1.8 L | 6,500 ₹1.9 L | 6,500 ₹1.9 L | 6,800 ₹2.0 L |
| 2.03 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 60-90 mtrs below ground level within all leads and lifts. | 30 | Mtr | 7,500 ₹2.3 L | 6,500 ₹1.9 L | 6,800 ₹2.0 L | 7,000 ₹2.1 L | 7,500 ₹2.3 L |
| 2.04 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 90-140 mtrs below ground level within all leads and lifts. | 50 | Mtr | 8,000 ₹4 L | 7,000 ₹3.5 L | 7,200 ₹3.6 L | 7,800 ₹3.9 L | 8,000 ₹4 L |
| 2.05 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 140-185 mtrs below ground level within all leads and lifts. | 45 | Mtr | 8,500 ₹3.8 L | 7,500 ₹3.4 L | 7,500 ₹3.4 L | 8,400 ₹3.8 L | 8,200 ₹3.7 L |
| 3.00 | Collection ,preservaion and display of suitable size sample box with top lid and locking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge. | 1 | Each | 1,000 ₹1,000 | 1,000 ₹1,000 | 1,000 ₹1,000 | 1,200 ₹1,200 | 1,500 ₹1,500 |
| 4.00 | a) Supplying & Lowering of IS marked Electric Resistance Welded M.S.pipe 200 mm dia nominal size housing, 6.4 mm thick having out side dia mtrs.219.10 mm bevelled edge conforming to I.S 4270-2001 with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 130 | Mtr | 3,800 ₹4.9 L | 4,500 ₹5.8 L | 4,800 ₹6.2 L | 3,784 ₹4.9 L | 5,000 ₹6.5 L |
| 5.00 | Pdg & Lowering of IS marked Electric Resistance Welded M.S.slotted pipe 200 mm dia nominal size housing, 6.4 mm thick having out side dia mtrs.219.10 mm Screwed End Socketted, conforming to I.S. 4270-2001 slot size 1.57x75mm welded with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 55 | Mtr | 4,600 ₹2.5 L | 5,600 ₹3.1 L | 6,000 ₹3.3 L | 3,584 ₹2.0 L | 6,200 ₹3.4 L |
Tender Value
₹20.0 L
EMD Value
₹37,436
Closing Date
3 Mar 2022, 5:00 pmClosed
Executive Engineer Jal Shakti Divn No.1 Una HP
Executive Engineer Jal Shakti Divn No.1 Una HP
Providing Multi Villages Piped Water Supply Scheme for Una Constituency in Una Block Distt. Una (H.P.)(SH Drilling , lowering of assembly and development of 185mtrs deep 200mm dia tubewell with Reverse Rotary Rig at vill. Basoli)
2022_HPIPH_57148_1
No. JSV-1/E -tender/ 22-17515-44 dt 23-02-2022
Open Tender
Civil Works
30 days
Basoli
as per NIT
10 documents required · 10 mandatory
₹400
Yes
Executive Engineer Jal Shakti Divn No.1 Una HP
₹37,436
Yes
17 Dec 2025
23 Feb 2022
4 Mar 2022
23 Feb 2022
3 Mar 2022
23 Feb 2022
23 Feb 2022 - 3 Mar 2022
Amount
Transportation of Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields errection and levelling at site, through all kinds of roads, approaches fields etc. in all leads and lifts completed in all respects as per the directions of Engineer - in-Charge.
Drilling of bore as per specifaction laid down in IS2800-1991 (part-I) with upto-date amnedments,if any,with Reverese Rotary Rig starting with 450-400 mm dia M.S pipe conforming to IS 4270-2001 with up-to-date amendements,if any, in all kind of soils, boulders, rocks, collapsible strata,sturated soils,artesian conditions including the cost of all consumable,stores,water,fuel,lubricants and other accessories etc. complete in all respectsd as per the directions of the Engineer -in -Charge.
Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 0-30 mtrs below ground level within all leads and lifts.
Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 30-60 mtrs below ground level within all leads and lifts.
Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 60-90 mtrs below ground level within all leads and lifts.
Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 90-140 mtrs below ground level within all leads and lifts.
Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date amendments,if any, of suitable sizes as mentioned above,from 140-185 mtrs below ground level within all leads and lifts.
Collection ,preservaion and display of suitable size sample box with top lid and locking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge.
a) Supplying & Lowering of IS marked Electric Resistance Welded M.S.pipe 200 mm dia nominal size housing, 6.4 mm thick having out side dia mtrs.219.10 mm bevelled edge conforming to I.S 4270-2001 with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge.
Pdg & Lowering of IS marked Electric Resistance Welded M.S.slotted pipe 200 mm dia nominal size housing, 6.4 mm thick having out side dia mtrs.219.10 mm Screwed End Socketted, conforming to I.S. 4270-2001 slot size 1.57x75mm welded with up-todate amendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge.
Providing and fixing M.S cetralized guides at suitable spacing for each tube well as per IS 226-1991 with upto-date amendments,if any, within all leads and lifts ,1x4Nos. completed in all respects in all respects as per the directions of the Engineer -in-Charge.
Supplying ,lowering and fixing in position IS marked mild steel bail plug of 200 mm diameters with "U" hooks as per IS 2800-1991 with up to date amendements ,if any, within all leads and lifts, complete in all respects per directions of the Engineer -in- Charge.
Providing and fixing in position threaded iron cap with locking arrangements of approved design to prevent foreign matter from getting into bore hole,as required, within all leads and lifts, complete in all respects as per directions of the Engineer -in- Charge.
Supplying and packing of gravel, consisting of hard quartz or other suitable material with an average specific gravity of not less than 2.5,not containing more than 2% by weight of thin flat of elangated pieces, shall be of sub rounded to rounded grains with minimum angular features of size 2-3.35 mm , shall be free from impurities such as shafe,shale,mica,felspar,clay,sand,dirt loam,baematte and organic material as pe IS 4097-1967 with upto date amendments, if any, around intake of tubewell with minium thickness of shroud around screen generally 100 mm to the entire depth of the bore as per 2800(Part-I ) 1991 with upto date amendments, if any, with in all leads and lifts complete in all respects as per direction of the Engineer -in- Charge.
Development of tubewell by back washing method,with air compressor of minimum 750 CFM capacity, pumping pipe of 200 mm size and air line of minimum 65 mm size or with other suitable method,till the well is thoroughly developed as per clause 4.2 of IS 11189 -1985, with upto date anebdnebts,if any, complete in all respects as per direction of the Engnieer -in- Charge.
Development of tubewell by continous over pumping method,with VT pump/ submersible pumps of suitable capacity not less than double the discharge established by the compressor method/ design discharge, untill the well is sand free as per IS-11189-1985 up -to- date amendments, if any, complete in all respects as per directions of the Engineer -in- Charge .The draw down and discharge to be established by running the VT/ Submersible pump continuosuly for 8 hours in the presence of officer not less than the rank of Assistant Engineer.
Testing the verticality of the tubewell as per clause 4.3 of IS 2800 (Part-II) 1979 with upto date amendments, if any, using plumb or plunger 6 mm smaller in dia within the inside diameter of the well casing.The results of the verticality test shall be recorded on proforma shown in Appendix A of IS 2800 (Part-II) 1979 with up-to-date amendments, if any, as appended with the tender documents and handed over complete in all respect as the directions of the Engineer -in- Charge.
Dismentalling of Rig or other allied accesssories after completion of job within all leads and lifts, complete in all respects as per the directions of the Engineer -in- Charge.
Handing over of the tubewell in complete shape as per appendex "B" of clause 7 of IS 2800 (Part-II) -1979 with upto date amendmentes if any, as appended with the tender documents, in laminated form , in triplicate, complete in all respect as per the directions of the Engineer-in-Charge.
H.N.SINGH AND COMPANY
popular pipes
ABTAR SINGH AND COMPANY
SUKHDEV ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid