8660 SPECIAL REPAIR TO BUILDING NUMBER P 76 AND P 77 AT MINTSD UNDER AGE BR II OF GE SOUTH PUNE

Amount

S&F 0.5mm thick pre-painted / coloured galvalum aluminium zinc coated GI based profile sheet of required colour having tensile strength of 550 Mpa as in roofing fixing all as per manufactures instructions fixed on roof with all fittings and accessories including dismantling old AC corrugated sheeting of any gauge & thickness, complete all as specified and directed.

S&F 0.5mm thick pre-painted / coloured galvalum aluminium zinc coated GI based plain sheet of required colour having tensile strenth of 550 Mpa as in ridge, valley gutters etc with all fittings and accessories including dismantling old AC corrugated sheeting of any gauge & thickness, complete all as specified and directed.

Dismantling timber scantlings, 40 Sqcm over in section in any position, fixed with nails unframed work, complete all as specified and directed.

M&L for for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; sun shades fixed with angle cleats, fastners or other connecting plates Fe 410 -W(GdeE- 250) quality A, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

S&F 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), two layered construction hoisted and fixed in position woth and including tank nipple and ball brass valve of suitable size as per site requirement, high pressure, with polythene float and flynut complete including taking down of existing unserviceable tank of 500 litre capacity complete all as specified in SSR Part-I and as directed.

S&F in repairs gun metal globe or gate valves of 20mm dia pipes with iron wheel head screwed both ends for iron pipe or for unions, fixed in repairs etc, complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces / slabs finished even and smooth without using extra cement duly mixed with integral water proofing compound as per manufacturer’s instructions, complete all as specified and directed. Note :- WPC shall be measured & paid separately under respective item

Supply only integral water proofing compound, complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.0 Kg / sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) laid on and including primed surface @ 0.30 Litre/sqm by torched application including dismantling / taking out of existing roof treatment having in single layer or multi layer in roofs any thickness including taking down of plastering, concreter padding including brick tiles or terracing tiles of any description from horizontal and vertical surface and removed spoil / rubbish & to a distance exceeding 5 Km complete all as specified and directed. Note :- The surface shall be wired brushed and clean to receive the PCC padding.

Supplying, fixing, jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking down of old unserviceable pipe complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b) 25mm bore.

Cutting chases, pinning in, brick walls & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting exc. 20cm girth, complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two coats of plastic emulsion paint over and including plaster of paris putty 1 mm thick over and including a coat of alkali resistant primer including preparation of old surfaces complete all as specified and as directed.

M&L for preparation of old decorated surfaces by brooming down rubbing and scraping down wherever necessary and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for coloured glazed ceramic designed tiles satin finish/glazed in vertical surface 600x300x 7-8mm thick, set and jointed in neat cement slurry with spacers 3mm wide and pointed in epoxy grout (shade as directed) to match over and including 10mm thick plaster in CM 1:4 with and including triangular filleting in CM 1:4 on top edges including dismantling of old existing wall tiles including backing coat and removing of debries & dismantled materials to a distance exc. 250m n. exc. 500m complete all as specified and as directed

M&L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of size 600x600 mm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiles including screed bed and removing of debries complete all as specified and as directed

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (Wood powder/ rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position with and including mild steel hold fast/ lugs or SS dash fastener of required dia and length complete all as specified and directed by Engr-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm , modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, with both side laminated wooden texture as approved water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size 100 mm with necessary full body threaded star headed counter sunk S.S screws etc. complete all as specified and directed by Engr-in-Charge.

S&F 200mm size stainless steel handles, fabricated type etc. complete all as specified and directed.

S&F 50mm dia x75 mm length heavy duty PVC magnatic door catcher / holder wall mounting type etc. complete all as specified and directed.

S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement and directed by Engineer-in-charge

S & F aluminium anodised with antique golden shade / shade as approved, three track sliding window with two shutters with 4mm thick tinted sheet glass of approved shade and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to following catalogue of 'JINDAL' or of equivalent make, fixed on existing granite frame but including sealed edges with silicon sealant complete all as specified and directed by Engr-in-Charge:- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F aluminium anodised with antique golden shade / shade as approved, louvered ventilator with provision of suitable space for fixing of exhaust fan by using aluminium section including 5mm thick frosted glass and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm etc complete and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc fixed on existing granite frame but including sealed edges with silicon sealant complete all specified and directed by Engr-in-Charge:- (a) SP - 20048 (b) Glazing clips - 19352. Note: Exhaust fan shall be measured and paid separately

S & F in repair brass chromium plated bottle traps, 302 grade, 32mm size suitable for wash basin for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed Make:- Jaquar- CAT-ALD-CHR-583 or equivalent cat part from the make as specified here-in-after

S&F in repairs high density polythene pipe 50mm dia (HDPE) of pressure rating 6kgf/Sq.cm fixed to wall or floor including fitting & fixtures like bend, tee, elbow etc. complete all as specified and directed.

S&F in repairs PVC connection pipe 450mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed.

S&F in repair 15 mm CP brass wall mixer suitable for mixing of hot & cold water swan neck pattern as approved, screwed down for 15mm dia iron pipe, complete all as speicified and directed. Make Jaquar CAT No-SOL-CHR-6267SHK or equivalent cat part from the make as specified here-in-after

S&F in repair 15 mm Pillar taps, cast copper alloy, with capstan heads, quarter turn chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as speicified and directed.

S&F wash basins, vitreous china (flat back or angle back type), including cutting for and pinning in ends of brackets and pedestal stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed. Make CERA- CAT No- S2040109 or equivalent cat part from the make as specified here-in-after

S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F in repairs two way 15mm bore bib taps, cast copper alloy, chromium plated, fancy type two way for fixing health faucet etc. with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S & F in repair 15 mm bore Stop valves, angle valves CP, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete complete all as specified and directed.

S&F in repair cascade type (coloured) floor mounted water closet with low level flushing cistern single piece coloured with floor trap, PVC coloured seat cover and connecting pipe etc complete all as specified and directed by Engr-in-charge Make:- Jaquar cat part no.FNS-WHT-40751P180UFSMZ or equivalent cat part from the make as specified here-in-after

S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall, complete all as specified and directed.

S & F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed

S&F in repairs mild steel chromium plated SS-302 grade grating (square) 125x125 mm with removable lead fixed over floor / nahani trap (with hole OR without hole), complete all as specified and directed

S & F in repairs brass chromium plated SS-302 grade fancy type tubular towel rail 20mm dia "D" type 60cm long complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed

Taking down carefully aluminium / copper point wiring (light, fan, socket or power), complete, including dismantling of fitting such as switches, ceiling rose, pendent, regulators etc and removing material to store for keeping in safe custody or for taking credit etc complete all as specified and directed

M& L Point wiring complete with 1.5 sqmm (nominal area) confirming IS:3419-1988 PVC insulated PVC unsheathed multi-stranded copper conductor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metallic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes and modular cover plates suitable for mounting switches, sockets etc and including PVC insulated and unsheathed multi-stranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor FRLSH connected to common earth dolly and all metal parts as required at site including cutting and chiseling on wall, roof as per site requirement and also making good surfaces and matching with the existing surface complete all as specified and directed for the following:- (a). One light / fan / exhaust point controlled by one way switch 6 Amps

(b). One 3/5 pin 6 Amp socket outlet point controlled by one switch on independent board.

(c) One 3/5 pin 6 Amp socket outlet point controlled by one switch on same board.

(d) One bell point controlled by one switch on independent board.

M&L for point wiring complete with 2.5 sqmm (nominal area) confirming IS:3419-1988 PVC insulated PVC unsheathed multi-stranded copper conductor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metallic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes and modular plates suitable for mounting switches, sockets etc and including PVC insulated and unsheathed multi-stranded single core copper conductor cable of size 2.5 sq mm green in colour as in earth continuity conductor FRLSH connected to common earth dolly and all metal parts as required at site including cutting chiseling on wall, roof as per site requirement and making good surfaces and matching with the existing surface complete all as specified and directed.

S&F in replacement of LED light fittings 20W 220V AC 4 feet tube light fitting extruded polycarbonate housing and robust construction LED lighting with high lumen output environmental friendly energy efficient CRI-6500K P.F not less than 0.95 fixed on PVC square for mounting the fitting & electrically connecting with three core 23/0.0076 PVC insulated multi strand copper flexible cable from ceiling rose to light fitting and for earthing complete all as specified and directed. Make:- Philips / Havells/ Halonix / Wipro

S&F in replacement Surface mounted 10W 220V AC 2 feet tube light fitting extruded polycarbonate housing and robust construction LED lighting with high lumen output environmental friendly energy efficient CRI-6500K P.F not less than 0.95 & electrically connecting with three core 23/0.0076 PVC insulated multi strand copper flexible cable from ceiling rose to light fitting and for earthing complete all as specified and directed Make:- Philips / Havells/ Halonix / Wipro

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.5M in depth for cable laying etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning, filling in hard / dense soil, approved earth including spreading, levelling, watering and well ramming in layers n.exc 250 mm thick after cable are laid and tested complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

S&F in replacement wall mounting brushed nickel decorative fixture suitable for B22 base bulb up to 9 watt with and including 01x09 Watts LED bulb (warm white) and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

S&F in replacement of 30 watt LED building security light IP-65 protection made from die cast aluminium housing with lens covered high power LED as lighting source with and including suitable dia GI pipe medium grade bracket complete all as specified and directed by Engr-in-charge.

S&F in replacement of ceiling rose surface shall comply with IS:371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm complete all as specified and directed.

S&F modular fan regulator, 5 step type suitable 120 watts, two module suitable for operation on 230 volts, 50 HZ AC supply complete all as specified.and directed.

S & F bell AC 230 Volts single pole DING DONG type complete all as specified and as directed.

S&F modular bell push, 6 Amps, one module complete all as specified.and directed.

Taking down the ceiling fan carefully and cleaning, servicing, greasing of movable parts and applying a coat of synthetic enameled paint white / colored with spray machine and fixing back the fan with fixing accessories required at site complete all as specified and directed by Engr-in-charge.

M&L for replacement of burnt winding of fans of any type with new rewinding complete with super enamelled copper wire of same guage and weight, replacement of insulation paper, varnishing, heating up and testing complete including taking down & re-fixing of fans at positions complete all as specified and directed by Engr-in-charge.

Taking down of old existing sub main wiring and M&L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size concealed in wall of brick/ stone masonry etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit length.

Taking down of old existing sub main wiring and M&L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size concealed in wall of brick/ stone masonry etc including one run of PVC insulated 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable and one run of PVC conduit will be measured as one unit length.

S&F Modular switch 1 way 6 Amps, one module complete all as specified and directed.

S&F Modular switch 1 way 16 Amps, one module with neon indicator complete all as specified and directed.

S&F Modular socket, 6 Amps, 2/3 pin combined, 2 module complete all as specified and as directed.

S&F Modular socket, 6 / 16 Amps, 2/3 pin combined 2 module complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning of LT underground cable, XLPE, insulated and sheathed heavy duty armoured with aluminium conductor 1100 volt grade, 70 Sqmm, 3.5 core,laid in trenches / walls or under floors etc. complete with cable glands, lugs etc complete complete all as specified and directed

Supplying and laying Gl pipe, 50 mm dia, Light grade as in cable protection at road crossing etc including necessary road cutting and making good with PCC 1:2:4, type B-1, by using 20mm graded stone aggregate, 100mm thick or fixing on wall / poles of any type, secured with clamps, nut & bolts etc complete all as specified and as directed by the Engineer - in Charge

Supply and fixing in replacement of plastic body exhaust fan, AC single phase, 240 V, 200mm sweep with louvers complete all as specified and as directed. Note: (i) Separate louvers of suitable size has to be provided and the cost of same shall be deemed to be included in unit quoted rates of this item (ii) Old exhaust fan shall be deposited in MES store by the contractor Make: Usha make 200mm Crisp Air VX or equivalent in Havells / Crompton

M&L for taking down of existing geysers of any capacity and re-fixing the same after completion of B/R repairs work complete all as and directed by Engr-in-charge.

Supply and laying in replacement of 77mm outer dia, double walled corrugated (DWC) HDPE duct pipe confirming to IS-16205 Pt-24 (Electrical use) with antirodent and non flame propogating properties of approved colour complete with fittings i.e. coupler, Tee, elbow clamp suitable for cable protection complete all as specified and directed by Engr-in-Charge. Make : Prince / Supreme / Astron plastic / Infra

S&F in replacement of sheet metal enclosures with and including single pole MCB 20 Amps with a two pin earth plug and socket with all accessories etc complete all as specified and directed.

M&L for earthing complete with galvanised iron earth plate electrode including necessary excavation and earth work in any type of soil with galvanized iron earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level and surrounded from all sides by 15 Cm thick and packed layer of charcol dust and common salt filling in alternate layers etc connected to with and including earth lead of 4mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I (2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth wire protected by galvanised iron 15 mm dia. light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing wire shall be encased in and including 15mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel shall be provided & charcoal / salt funnel & other fittings etc. complete all as specified and as directed. Note :- (i) Unit rates includes the cost of 7.50 m GI pipe for protection of 4mm dia GI earth wire for each earthing.

S&F in replacement of electrical meter box compartmentalized design suitable for 12 energy meter, outdoor wall mounted type, weather proof fabricated out of not less than 2.0 mm thick CRCA sheet for outer section and 1.6mm for doors and inner partitions, powder coated in Siemens grey colour, double door. The enclosure shall be front openable with locking arrangement and provided with 5mm thick bakelite sheet for mounting the energy meters and MCB DB. The enclosure shall be provided with suitable size PVC cable glands for incoming and outgoing cables/wires. The overall size of the meter box shall not be less than 1200x1200x300mm complete with all accessories prewired twin core twisted flexible copper conductor cable of suitable size complete all as directed by Engr-in-Charge

M&L for removing LAN/CAN/Telephone cables safely and handover to user and provide PVC conduit including concealed of conduit pipe along with the electrical cable conduits complete all as directed by Engr-in-Charge

Taking down unserviceable MCCB DB / MCB DB along with wooden boards of any size and type and making good disturbed surface as per existing complete all as directed by Engr-in-charge

Supply and fixing in replacement factory made epoxy powder coated distribution board TPN, 8 way double door (VTPN MCCB DB) MCCB as incomer with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with knockout complete all as specified and directed. Note:- MCCBs will be measured and paid separately under respective of BOQ.

S&F in replacement MCB DB 08 way, SPN, double door sheet metal enclosure factory made suitable for MCB DB's 240 Volts with 200 amp rated bus bar, neutral & earthing link bar, surface mounting complete including with taking down the existing DB of any type & size along with its accessories by removing from existing circuits and re-fixing the new DBs and circuits complete all as required at site and as directed by the Engr-in-Charge. Note - MCBs will be measured & paid separately under respective items of BOQ

S&F in replacement MCB SP 6 to 32 Amps 240V, 10 KA breaking capacity, C curve as per IS/IEC 60898-1 2002 with IP 20 protected complete all as directed by Engr-in-Charge.

S&F in replacement MCB SPN 40 to 63 Amps 240V, 10 KA breaking capacity, C curve as per IS/IEC 60898-1 2002 with IP 20 protected complete all as directed by Engr-in-Charge.

S&F in replacement MCCB with rating of 250 Amps, 415 Volts 3 pole with 25 kA breaking capacity, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu) including with suitable spreaders and phase barriers for each terminals complete all as directed by Engr-in-Charge.

M/s.BAJRANG CONSTRUCTION (BID ID -3263196)

Gauri Associates (BID ID -3265922)

SARATH ENTERPRISES (BID ID -3266676)