SPECIAL REPAIR TO BLDG NO P-7A AND P-7 FH AT AGE B/R (WEST) UNDER GE(WEST) COLABA, MUMBAI

Amount

(A) Schedule A Part- I (B/R PORTION) Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old,piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

Fixing only in repairs in patches including cutting out old,piecing,heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old,piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20mm thick or feather edge 15mm o 20mm thick and fixed with 30mm laps in any situation including scafoldings of any hieght complete all as specified and directed.

Fixing only in repair in patches including cutting out old,piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20mm thick or feather edge 15mm o 20mm thick and fixed with 30mm laps in any situation including scafoldings of any hieght complete all as specified and directed.

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar complete all as specified and directed.

Dismantling roof battens of any description in any position complete all as specified and directed.

Supply & fix joist, channel, angle, tee section, & MS flat fixed independently , with connection plate , etc ( cut ordinary length i.e within 20mm of the indicated )fot purlins fixed wooden rafters and all other similar works conforming to Fe 410=W (Gde-E-250) quality-A complete all as specified and dircted.

Material and labour in repair to replace old decayed timber( including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any hieght complete all as specified and directed.

M & L pre-painted roof tiles of metal sheet of Mangalore tile design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed. Make for Item No. 9 & 10- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

M&L for granite (of any colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing laid in floor/Jmaps/WHB conters and all othersimilar works in approved design over 20mm thick screed bed in cement motar 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L light shade double charged vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile exceeding 0.36 sqm but n.exc 0.42 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified.

M&L light shade double charged vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile exceeding 0.36 sqm but n.exc 0.42 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mmthick on fair fair face of bricks work in CM (1:4) complete all as specified.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for digital coloured glazed ceramic tiles 300 x 600 x 7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates) Make for Item No. 15 to 18: M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

Dismantaling of ceiling boards (plup insulation or insulation etc) or insulation board any thickness including over fillet/grid all as specified.

M&L for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

Material and labour 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to aluminum frame work in ceiling and all other similar works complete all as specified and directed. Make for Item No. 20 & 21- RAMCO/Deckelite India/Supra/Hilux/Anchor/ Everest

Dismantling of brick work or stone/boulder masonry built in cement mortar or cement lime mortar all as specified and directed.

M&L brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar1:6all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L for Ready mix plaster at any position including wall, ceiling, roof, chajjas, parapet in CM 1:3, 15 mm thick in two coats using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface even and smooth without using extra cement. (Water Proofing Chemical shall be measured and paid separately) Make : UltratTech Readiplast RP or equivalent

M&L Rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work to be finished even and smooth(with out using extra cement. complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement completed all as specified

Supply only liquid water proofing compound. Make - Plastocrete of Sika/Pidiproof LW of Pidilite.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3 mm thick (average) wall putty all as specified. Make for Item No. 29 & 30:-"Tractor Uno" of Asian paint/'Jadoo' of Berger paint/ Nerolac beauty of Nerolac paint as approved by GE

M&L for preparation of newly plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint) over one coat of primer complete all as per manfacturer,s specifications and directed. Make: Asian Paints Ultima Protek or equivalent of Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max) as approved by GE.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M & L for French polishing with two or more coat on new / old surfaces of any description, width or girth after cleaning and fine sanded and making free from any wax and grease, removing it completely to expose the bare wood (with Paint & Varnish Remover if required ) and preparing the surface by filling of open grained with a coat of wood filler and making it smooth shining surface using alcohal based shellac finish .

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make -(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exc 1.50 n exc. 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm n exc 2.00 Sqm complete all as spcified and directed.

Supply & fix for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Supply & fix 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supplied and fitted to chowkhats of 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

Supply & fix 30 mm thick flush shutter, solid core construction,with block board core and plywood face panel, decorative type pre – laminated on both sides with veneer facing complete all as specified and directed.

Supply & fix mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and directed.

Supply & fix in repair 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type both side pre-laminated one side white and other side with veneer facing as in cupboard shelves and cupboard shutter fixed with screws to timber frame work with 1st class hard wood leaping all around complete all as specified & directed. Make- (a) Bajaj Boards (b) NU Wood (c) A-1 Boards (d) Bhutan Board (e) Charminar (f) KITPLY (g)Century (h)Green Ply

S&F in repair 40 mm dia ,cupboard knobs fixed with nuts screws and washers of brass,polished complete all as specified and directed.

S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket,glazing, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F 5.5 mm thick sheet glass, plain or frosted, premium quality, in any size of pane complete all as specified and directed.

Supply & fix 3 mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed. Make for Item No. 48 & 49-(a) Saint Gobin (b) Asahi (c) Atul Glass Industries (iv) GOld unserviceableen Fish (v) Modi Guard (vi)Hindustan Pilkington Glass

S&F Aluminium grill, 6 mm thick (Make- Deco Grill Cat pat No. 102 / Royal Grill cat pat No. 102) cut to required size and shape and fixed in position with aluminium beading complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, wooden beading etc complete all as specified

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty (Birla White Wall care or equivalent) 3mm thick avg on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer. Make :-"Tractor Uno" of Asian paint/'Jadoo' of Berger paint/ Nerolac beauty of Nerolac paint as approved by GE

Taking down shutters of any description n exc. 1.00 Sqm complete all as spcified and directed.

Supply and fix for 30mm thick glazed & skelton, open rebated & prepare to receive glass/gauged etc divided in square with plain, chamferred or rounded mitred edges of framing plain, chamfered or rounded fitted with or without sash bars & metred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) supplied & fitting to chowkats using 2nd class hard wood all as specified and as directed.

S&F 75 mm butt hinges medium weight cold rolled stainless steel.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 75 mm cast type anodised

S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 150 mm cast type anodised

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed. Make for Item No. 55 to 60 : Classic/ Shalimar/ CLIF/ARGET

M&L in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as directed.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter each upto 04 storeys complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified. Make for Item No. 63 & 64- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.

S&F as in repair 15 mm bore fancy type angular valve 2 in 1 cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions . Make for item No. 65 & 66 : Jaypee/GMP/Neta/Zoloto/Prayag polimer/Prima/Seiko

S&F PVC connection 15mm size PTMT nuts of length 450 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,20 mm dia bore complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed Make for Item No. 72 & 73- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make:Commander/ Hindware/ Paryware/ CERA.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete. Make : Neycer Kermag (Standard)/Hindustan Sanitary Ware Industries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)/Jaquar

Supply and fixing 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450 mm long(light weight) round shape 250 mm dia with wall flange complete all as specified & directed. Make- ESS ESS CROMA/hindware/Seiko

M&L in repair fancy type CP Towel Rail 61 cm long complete all as specified and directed.

M&L in repair CP soap dish all as per cat part.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified.

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl. Make for Item No. 81 to 84 : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

(B) Schedule A Part- II (E/M PORTION) Taking down carefully copper/aluminum submain wiring (any type / any size) complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed

S&F Sub main wiring in repair, with two run of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC casing caping of adequate size (not less than 20 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 04 sqmm cable and one run of 04 sqmm cable with PVC casing caping shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Casing/Caping : Precision/ Prestoplast/ Polycab /Pressfit

S&F Sub main wiring in repair, with two run of 10 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC casing caping of adequate size (not less than 25 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC casing caping shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Casing/Caping : Precision/ Prestoplast/ Polycab /Pressfit

S&F Sub main wiring in repair, with four run of 16 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 16 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC heavy duty conduite of adequate size (not less than 25 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement four runs of 16 sqmm cable and one run of 16 sqmm cable with PVC heavy duty conduite shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab

Taking down carefully copper/aluminum wiring (Light point, fan pt, 5 Amp socket point and poer point) complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed

Material & Labour for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box and with including moduler cover plate and frame, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell/ Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

All as per serial no.90 here-in but for bell point controlled by one switch.

Ditto all as per item No.90 but One ceiling fan controlled by one switch & regulator

Ditto all as per item No.90 but One Exhaust fan / Wall fan controlled by one switch.

Ditto all as per item No.90 but One 3 pin socket point 5 Amps on independent board

Ditto all as per item No 90 but One 3 pin socket point 5 Amps on same board

All as per srl item no 90 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge.

S&F Moduler Switch piano, flush type single pole, one way 10 Amp

S&F Moduler Switch piano, flush type single pole, one way 16/20 Amp

S&F Moduler socket 2/3 pin 6 Amp

S&F Moduler socket 6/16 A 2/3 pin .

S&F Moduler stepped type electronic fan regulator 100 watt flush type, two module

S&F Moduler bell push, 2 modue, 10 Amp.

Supply and fix cover plate with frame 2 module

Supply and fix cover plate with frame 3 module

Supply and fix cover plate with frame 6 module

Supply and fix cover plate with frame 8 module

S&F Switch Socket combination 15 Amp, 2/3 pin

S&F Switch piano, in repair, flush type single pole, one way 5 Amp

S&F switch socket combination in repair, 2/3 pin 5 Amp

S & F stepped type electronic fan regulator in repair, 450 watt flush type on the existing phenolic laminated sheet etc.

S & F angle Holder along with 3 Watt LED Bulb Make: Wipro Catpat No WIPROB22-3WW-6 or equivalent model in Havells/ Philips all as specified and directed.

Supply & Fix ceiling rose in repair, surface bakelite 65 x 50 mm two to three terminals complete all as specified and as directed. Make for Item No 97 to 111: (i) Anchor (ii) Havells (iii) Legrand

Supply and Fix 20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make:Havells cat pt no LHEXBXPNIN1W020 equivalent model in Wipro model no - Wipro Garnet 20 W LED Batten 6500K / Philips model No - BN150W LED 20S-6500 PSE ODGR / OSRAM.

Supply and fixing in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses , pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers etc. complete all as directed by Engineer-in-Charge. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC.

Supply and fix / lay cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 1.5 Sqmm 3 core drawn through non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle complete all specified and directed Note: Mode of measurement 1.5 Sqmm 3 core cable with PVC conduite shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

Supply and fix anchor fasterner with D hook alongwith "S" type hook, drilled and countersunk for screw, as necessary, nut, bolt with washer etc.complete all as specified and directed

Supply and fix LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51

Supply and fix sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fix sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fix MCB SP in repair, 240 volt, 6 to 32 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

Supply and fix MCB SPN in repair, 240 volt, 40 to 63 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

S&F single pole and neutral enclosure, in repair, with a two pin and earth plug and socket 20 Amp complete with one single pole MCB

S&F DB vertical type in repair, 6 way TPN double door load line powder coated complete alongwith 200 Amp rated Bus bar with 160 Amp MCCB fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB

S&F DB vertical type in repair, 4 way TPN double door load line powder coated complete alongwith 200 Amp rated Bus bar with 63 Amp MCCB fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB Make for Item No.118 to 124 : (i) Larsen & Toubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

RAJU AND CO

Shivam Enterprises

GANGAJAL

ABHIRAJ CONSTRUCTIONS

SAI SIDDHI CONSTRUCTION